ISO/IEC 14496-5:2001/Amd 26:2011
(Amendment)Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 26: Reference software for scalable complexity 3D mesh coding in 3DG compression model
Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 26: Reference software for scalable complexity 3D mesh coding in 3DG compression model
Technologies de l'information — Codage des objets audiovisuels — Partie 5: Logiciel de référence — Amendement 26: Logiciel de référence d'encodage de maille 3D de complexité atteignable dans le modèle de compression 3DG
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 14496-5
Second edition
2001-12-15
AMENDMENT 26
2011-12-01
Information technology — Coding of
audio-visual objects —
Part 5:
Reference software
AMENDMENT 26: Reference software for
scalable complexity 3D mesh coding in 3DG
compression model
Technologies de l'information — Codage des objets audiovisuels —
Partie 5: Logiciel de référence
AMENDEMENT 26: Logiciel de référence d'encodage de maille 3D de
complexité atteignable dans le modèle de compression 3DG
Reference number
ISO/IEC 14496-5:2001/Amd.26:2011(E)
©
ISO/IEC 2011
---------------------- Page: 1 ----------------------
ISO/IEC 14496-5:2001/Amd.26:2011(E)
This CD-ROM contains the publication ISO/IEC 14496-5:2001/Amd.26:2011 in portable document format
(PDF), which can be viewed using Adobe® Acrobat® Reader.
Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2011
All rights reserved. Unless required for installation or otherwise specified, no part of this CD-ROM may be reproduced, stored in a retrieval
system or transmitted in any form or by any means without prior permission from ISO. Requests for permission to reproduce this product
should be addressed to
ISO copyright office Case postale 56 CH-1211 Geneva 20 Switzerland
Internet copyright@iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
Published in Switzerland
ii © ISO/IEC 2011 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 14496-5:2001/Amd.26:2011(E)
Installation
If this publication has been packaged as a zipped file, do NOT ope
...
INTERNATIONAL ISO/IEC
STANDARD 14496-5
Second edition
2001-12-15
AMENDMENT 26
2011-12-01
Information technology — Coding of
audio-visual objects —
Part 5:
Reference software
AMENDMENT 26: Reference software for
scalable complexity 3D mesh coding in 3DG
compression model
Technologies de l'information — Codage des objets audiovisuels —
Partie 5: Logiciel de référence
AMENDEMENT 26: Logiciel de référence d'encodage de maille 3D de
complexité atteignable dans le modèle de compression 3DG
Reference number
ISO/IEC 14496-5:2001/Amd.26:2011(E)
©
ISO/IEC 2011
---------------------- Page: 1 ----------------------
ISO/IEC 14496-5:2001/Amd.26:2011(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2011 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 14496-5:2001/Amd.26:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 26 to ISO/IEC 14496-5:2001 was prepared by Joint Technical Committee ISO/IEC JTC 1,
Information technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia
information.
This Amendment introduces a Reference Software for Scalable Complexity 3D Mesh Coding in 3DG
Compression Model. This Amendment deals with the reference software of the SC3DMC in 3DGCM tool.
© ISO/IEC 2011 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/IEC 14496-5:2001/Amd.26:2011(E)
Information technology — Coding of audio-visual objects —
Part 5:
Reference software
AMENDMENT 26: Reference software for scalable complexity 3D
mesh coding in 3DG compression model
Add 7.4, Reference Software for the Scalab
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.