ISO/IEC 14443-3:2011/Amd 3:2014

Identification cards — Contactless integrated circuit cards — Proximity cards — Part 3: Initialization and anticollision — Amendment 3: Alternating between PICC and PCD functionalities, and PICC supporting both types

Cartes d'identification — Cartes à circuit(s) intégré(s) sans contact — Cartes de proximité — Partie 3: Initialisation et anticollision — Amendement 3: Alternance entre fonctionnalités PICC et PCD, et PICC supportant les deux types

General Information

• Status: Withdrawn
• Publication Date: 13-Apr-2014
• Withdrawal Date: 13-Apr-2014
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: ISO/IEC JTC 1/SC 17 - Cards and security devices for personal identification
• Drafting Committee: ISO/IEC JTC 1/SC 17/WG 8 - Integrated circuit cards without contacts
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 27-May-2016

Relations

• Revised: ISO/IEC 14443-3:2016 - Identification cards — Contactless integrated circuit cards — Proximity cards — Part 3: Initialization and anticollision
• Effective Date: 21-Nov-2015
• Amends: ISO/IEC 14443-3:2011 - Identification cards — Contactless integrated circuit cards — Proximity cards — Part 3: Initialization and anticollision
• Effective Date: 25-Apr-2020

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 14443-3
Second edition
2011-04-15
AMENDMENT 3
2014-04-15
Identification cards — Contactless
integrated circuit cards — Proximity
cards —
Part 3:
Initialization and anticollision
AMENDMENT 3: Alternating between
PICC and PCD functionalities, and PICC
supporting both types
Cartes d’identification — Cartes à circuit(s) intégré(s) sans contact —
Cartes de proximité —
Partie 3: Initialisation et anticollision
AMENDEMENT 3: Alternance entre fonctionnalités PICC et PCD, et
PICC supportant les deux types
Reference number
ISO/IEC 14443-3:2011/Amd.3:2014(E)
©
ISO/IEC 2014

---------------------- Page: 1 ----------------------
ISO/IEC 14443-3:2011/Amd.3:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2014 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 14443-3:2011/Amd.3:2014(E)

Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work. In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the national bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 3 to ISO/IEC 14443-3:2011 was prepared by Joint Technical Committee ISO/IEC JTC 1,
Information technology, Subcommittee SC 17, Cards and personal identification.
© ISO/IEC 2014 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 14443-3:2011/Amd.3:2014(E)
Identification cards — Contactless integrated circuit cards
— Proximity cards —
Part 3:
Initialization and anticollision
AMENDMENT 3: Alternating between PICC and PCD
functionalities, and PICC supporting both types
Page 1, Clause 1
Add new bullet after last bullet:
— optional capability to allow a device to alternate between the functions of a PICC and a PCD to
communicate with a PCD or a PICC, respectively. A device which implements this capability is called
a PXD and shall comply with all PXD requirements in this standard.
Replace last paragraph by:
This part of ISO/IEC
...