ISO/IEC 13818-1:2015/FDAmd 7

Information technology — Generic coding of moving pictures and associated audio information — Part 1: Systems — Amendment 7: Virtual segmentation

Technologies de l'information — Codage générique des images animées et du son associé — Partie 1: Systèmes — Amendement 7: Segmentation virtuelle

General Information

• Status: Withdrawn
• ICS: 35.040 - Information coding
• ICS: 35.040.40 - Coding of audio, video, multimedia and hypermedia information
• Technical Committee: ISO/IEC JTC 1/SC 29 - Coding of audio, picture, multimedia and hypermedia information
• Drafting Committee: ISO/IEC JTC 1/SC 29 - Coding of audio, picture, multimedia and hypermedia information
• Current Stage: 5098 - Project deleted
• Completion Date: 11-Jan-2018

Relations

• Amends: ISO/IEC 13818-1:2015 - Information technology — Generic coding of moving pictures and associated audio information — Part 1: Systems
• Effective Date: 01-Jan-2022
• Revised: ISO/IEC 13818-1:2018 - Information technology — Generic coding of moving pictures and associated audio information — Part 1: Systems
• Effective Date: 02-Sep-2017

Standards Content (Sample)

FINAL
ISO/IEC
AMENDMENT
DRAFT
13818-1:2015
FDAM 7
ISO/IEC JTC 1/SC 29
Information technology — Generic
Secretariat: JISC
coding of moving pictures and
Voting begins on:
2016-12-19 associated audio information —
Voting terminates on:
Part 1:
2017-02-13
Systems
AMENDMENT 7: Virtual segmentation
Technologies de l’information — Codage générique des images
animées et du son associé —
Partie 1: Systèmes
AMENDEMENT 7: Segmentation virtuelle
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/IEC 13818-1:2015/FDAM 7:2016(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO/IEC 2016

---------------------- Page: 1 ----------------------
ISO/IEC 13818-1:2015/FDAM 7:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO/IEC 2016 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 13818-1:2015/FDAM 7:2016(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of
documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on the ISO
list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html
Amendment 7 to ISO/IEC 13818-1:2015 was prepared by Joint Technical Committee ISO/IEC JTC 1,
Information technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia
information, in collaboration with ITU-T. The identical text is published as ITU-T H.222 (10/2016).
© ISO/IEC 2016– All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 13818-1:2015/FDAM 7:2016(E)
Text of ISO/IEC 13818-1:2015/FDAM7
INTERNATIONAL STANDARD
RECOMMENDATION ITU-T
Information technology – Generic coding of moving pictures and
associated audio information: Systems
Amendment 7
Carriage of MPEG-H 3D audio over MPEG-2 Systems
In clause 2.6.90, replace Table 2-107 with:
Table 2-107 – Extension descriptor
Syntax No. of bits Mnemonic
Extension_descriptor () {
descriptor_tag 8 uimsbf
descriptor_length 8 uimsbf
extension_descriptor_tag 8 uimsbf
if ( extension_descriptor_tag == 0x02) {
ObjectDescriptorUpdate()
}
else if ( extension_descriptor_tag == 0x03) {
HEVC_timing_and_HRD_descriptor()
}
else if ( extension_descriptor_tag == 0x04) {
af_extension_descriptor()
}
else if ( extension_descriptor_tag == 0x05) {
HEVC_operation_point_descript
...