ISO/IEC 14496-5:2001/Amd 36:2015
(Amendment)Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 36: Pattern-based 3D mesh coding reference software
Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 36: Pattern-based 3D mesh coding reference software
Technologies de l'information — Codage des objets audiovisuels — Partie 5: Logiciel de référence — Amendement 36: Logiciel de référence d'encodage de maille en 3D basé sur les modèles
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 14496-5
Second edition
2001-12-15
AMENDMENT 36
2015-12-01
Information technology — Coding of
audio-visual objects —
Part 5:
Reference software
AMENDMENT 36: Pattern-based 3D
mesh coding reference software
Technologies de l’information — Codage des objets audiovisuels —
Partie 5: Logiciel de référence
AMENDEMENT 36: Logiciel de référence d’encodage de maille en 3D
basé sur les modèles
Reference number
ISO/IEC 14496-5:2001/Amd.36:2015(E)
©
ISO/IEC 2015
---------------------- Page: 1 ----------------------
ISO/IEC 14496-5:2001/Amd.36:2015(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO/IEC 2015 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 14496-5:2001/Amd.36:2015(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work. In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for
the different types of document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent
rights. Details of any patent rights identified during the development of the document will be in the
Int
...
© ISO/IEC 2015 – All rights reserved
ISO/IEC JTC 1/SC 29
Date: 2015-06-26
ISO/IEC 14496-5:2001/FDAM 36:2015(E)
ISO/IEC JTC 1/SC 29/WG 11
Secretariat: N15353 JISC
Information technology — Coding of audio-visual objects — Part 5:
Reference software, AMENDMENT 36 : Pattern-based 3D mesh coding
reference software
Élément introductif — Élément central — Partie 5: Titre de la partie
Document type: International Standard
Document subtype: Amendment
Document stage: (50) Approval
Document language: E
STD Version 2.1c2
---------------------- Page: 1 ----------------------
ISO/IEC 14496-5:2001/FDAM 36:2015(E)
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as
permitted under the applicable laws of the user's country, neither this ISO draft nor any extract
from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO/IEC 2015 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 14496-5:2001/FDAM 36:2015(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work. In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of document should be noted. This document was drafted in accordance with the editorial
rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO and
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.