ISO 17266:2018

Cinematography — Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives — Position and width dimensions

ISO 17266:2018 specifies the lateral, and vertical where applicable, positions and width dimensions of multichannel analogue and digital photographic sound records and control tracks on 35 mm and 70 mm motion-picture prints and negatives.

Cinématographie — Enregistrements des commandes et du son photographiques analogiques et numériques multicanaux sur copies et négatifs cinématographiques 35 mm, et enregistrements des commandes sonores numériques sur copies et négatifs cinématographiques 70 mm — Position et dimensions en largeur

General Information

• Status: Published
• Publication Date: 08-Feb-2018
• ICS: 37.060.20 - Motion picture films. Cartridges
• Technical Committee: ISO/TC 36 - Cinematography
• Drafting Committee: ISO/TC 36 - Cinematography
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 10-Jul-2023

Relations

• Revises: ISO 17266:2002 - Cinematography — Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives — Position and width dimensions
• Effective Date: 02-Sep-2017

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 17266
Second edition
2018-02
Cinematography — Multichannel
analogue and digital photographic
sound and control records on 35 mm
motion-picture prints and negatives,
and digital sound-control records
on 70 mm motion-picture prints
and negatives — Position and width
dimensions
Cinématographie — Enregistrements des commandes et du son
photographiques analogiques et numériques multicanaux sur
copies et négatifs cinématographiques 35 mm, et enregistrements
des commandes sonores numériques sur copies et négatifs
cinématographiques 70 mm — Position et dimensions en largeur
Reference number
ISO 17266:2018(E)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 17266:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 17266:2018(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Positions and dimensions . 1
5 Analogue sound records . 2
Bibliography .10
© ISO 2018 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 17266:2018(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 36, Cinematography.
This second edition cancels and replaces the first edition (ISO 17266:2002), which has been technically
revised.
iv © ISO 2018 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 17266:2018(E)
Cinematography — Multichannel analogue and digital
photographic sound and control records on 35 mm motion-
picture prints and negatives, and digital sound-control
records on 70 mm motion-picture prints and negatives —
Position and width dimensions
1 Scope
This document specifies the lateral, and vertical where applicable, positions and width dimensions
of multichannel analogue and digital photographic sound records and control tracks on 35 mm and
70 mm motion-picture prints and negatives.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
4 Positions and dimensions
4.1 The general positions of analogue, control and digital tracks for 35 mm motion-picture film are
shown in Figu
...