Cinematography — Audio head tones for use in international exchange of 35 mm analogue magnetic film masters — Specifications and location

ISO 12611:2004 specifies head-leader tones for use on interchanged motion-picture analogue audio masters, from two track (on three-track format records) through six track.

Cinématographie — "Audio head tones" pour utilisation dans les échanges internationaux de "masters" de film magnétique analogiques de 35 mm — Spécifications et emplacement

L'ISO 12611:2004 spécifie les signaux figurant en tête sur les masters audio analogiques destinés aux échanges en cinéma, depuis les enregistrements sur deux pistes (en réalité format trois pistes) jusqu'à ceux sur six pistes.

General Information

Status
Published
Publication Date
14-Jun-2004
Current Stage
9093 - International Standard confirmed
Completion Date
10-Jul-2023
Ref Project

Relations

Buy Standard

Standard
ISO 12611:2004 - Cinematography -- Audio head tones for use in international exchange of 35 mm analogue magnetic film masters -- Specifications and location
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 12611:2004 - Cinématographie -- "Audio head tones" pour utilisation dans les échanges internationaux de "masters" de film magnétique analogiques de 35 mm -- Spécifications et emplacement
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 12611
Second edition
2004-06-01


Cinematography — Audio head tones for
use in international exchange of 35 mm
analogue magnetic film masters —
Specifications and location
Cinématographie — «Audio head tones» pour utilisation dans les
échanges internationaux de «masters» de film magnétique analogiques
de 35 mm — Spécifications et emplacement




Reference number
ISO 12611:2004(E)
©
ISO 2004

---------------------- Page: 1 ----------------------
ISO 12611:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2004 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 12611:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12611 was prepared by Technical Committee ISO/TC 36, Cinematography.
This second edition cancels and replaces the first edition (ISO 12611:1997), of which it constitutes a minor
revision.
© ISO 2004 – All rights reserved iii

---------------------- Page: 3 ----------------------
INTERNATIONAL STANDARD ISO 12611:2004(E)

Cinematography — Audio head tones for use in international
exchange of 35 mm analogue magnetic film masters —
Specifications and location
1 Scope
This International Standard specifies head-leader tones for use on interchanged motion-picture analogue
audio masters, from two track (on three-track format records) through six track.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 266:1997, Acoustics — Preferred frequencies
ISO 4834:1997, Cinematography — Magnetic sound test films excluding striped release prints — Basic
technical characteristics
AES7-2000, AES standard for the presevation and restoration of audio recording — Method of measuring
1)
recorded fluxivity of magnetic sound records at medium wavelengths
DIN 45520:1973, Magnetic tape recorders; measurement of the absolute level of the magnetic flux and its
frequency response on magnetic tapes
3 Leader
3.1 The first test section of leader shall be a 1 kHz sine wave signal recorded at a flux of 1
...

NORME ISO
INTERNATIONALE 12611
Deuxième édition
2004-06-01


Cinématographie — «Audio head tones»
pour utilisation dans les échanges
internationaux de «masters» de film
magnétique analogiques de 35 mm —
Spécifications et emplacement
Cinematography — Audio head tones for use in international exchange
of 35 mm analogue magnetic film masters — Specifications and
location




Numéro de référence
ISO 12611:2004(F)
©
ISO 2004

---------------------- Page: 1 ----------------------
ISO 12611:2004(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


©  ISO 2004
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO 2004 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 12611:2004(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 12611 a été élaborée par le comité technique ISO/TC 36, Cinématographie.
Cette deuxième édition annule et remplace la première édition (ISO 12611:1997), dont elle constitue une
révision mineure.
© ISO 2004 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
NORME INTERNATIONALE ISO 12611:2004(F)

Cinématographie — «Audio head tones» pour utilisation dans
les échanges internationaux de «masters» de film magnétique
analogiques de 35 mm — Spécifications et emplacement
1 Domaine d'application
La présente Norme internationale spécifie les signaux figurant en tête sur les masters audio analogiques
destinés aux échanges en cinéma, depuis les enregistrements sur deux pistes (en réalité format trois pistes)
jusqu'à ceux sur six pistes.
2 Références normatives
Les documents de référence suivants sont indispensables pour l'application du présent document. Pour les
références datées, seule l'édition citée s'applique. Pour les références non datées, la dernière édition du
document de référence s'applique (y compris les éventuels amendements).
ISO 266:1997, Acoustique — Fréquences normales
ISO 4834:1997, Cinématographie — Films magnétiques sonores étalons à l'exclusion des copies
d'exploitation — Caractéristiques techniques de base
AES7-2000, Norme AES pour la préservation et la restauration des enregistrements sonores — Méthode de
1)
mesure des flux des enregistrements sonores magnétiques aux longueurs d'onde moyennes
DIN 45520:1973, Enregistreurs de bande magnétique — Mesure du niveau du flux magnétique et de la
réponse de fréquence sur les bandes magnétiques
3 Leader
3.1 Le premier signal en tête de la bande
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.