ISO/FDIS 105-B04
(Main)Textiles — Tests for colour fastness — Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
Textiles — Tests for colour fastness — Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
This part of ISO 105 specifies a method intended for determining the resistance of the colour of textiles of all kinds, except loose fibres, to the action of weather as determined by exposure to simulated weathering conditions in a cabinet equipped with a xenon arc lamp. ISO 105-B04 focuses on textiles (such as apparel) where the main evaluation criteria is the colour fastness. This method can be used to determine if a textile is wet light-sensitive. NOTE 1 General information on colour fastness to light is given in Annex A. NOTE 2 Textiles or technical textiles, which are permanently exposed to an outdoor environment and/or require mechanical testing (such as tensile strength determination) may be tested according to ISO 105-B10.
Textiles — Essais de solidité des coloris — Partie B04: Solidité des coloris aux intempéries artificielles : Lampe à arc au xénon
General Information
Relations
Buy Standard
Standards Content (Sample)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 105-B04
ISO/TC 38/SC 1
Textiles — Tests for colour fastness —
Secretariat: BSI
Voting begins on:
Part B04:
2023-12-04
Colour fastness to artificial
Voting terminates on:
weathering: Xenon arc fading lamp
2024-01-29
test
Textiles — Essais de solidité des coloris —
Partie B04: Solidité des coloris aux intempéries artificielles: Lampe à
arc au xénon
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 105-B04:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 1 ----------------------
ISO/FDIS 105-B04:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 105-B04
ISO/TC 38/SC 1
Textiles — Tests for colour fastness —
Secretariat: BSI
Voting begins on:
Part B04:
Colour fastness to artificial
Voting terminates on:
weathering: Xenon arc fading lamp
test
Textiles — Essais de solidité des coloris —
Partie B04: Solidité des coloris aux intempéries artificielles: Lampe à
arc au xénon
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 105-B04:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
© ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 2 ----------------------
ISO/FDIS 105-B04:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Materials . 2
5.1 Blue wool references . 2
5.2 Glass case for blue wool references. 2
5.3 Specimen mounting cards . 2
5.4 Specimen covers .
...
© ISO 2023 – All rights reserved
ISO/DIS FDIS 105-B04:2023 (DIS)
ISO /TC 38/SC 1/WG 1
Secretariat: XXXX BSI
Date: 2023-11-20
Textiles — Tests for colour fastness — —
Part B04:
Colour fastness to artificial weathering: Xenon arc fading lamp
test
Textiles — Essais de soliditesolidité des teintures — Panie coloris —
Partie B04: SoliditeSolidité des teinturescoloris aux intemperies anificielles intempéries artificielles: Lampe
aà arc au xenonxénon
FDIS stage
© ISO 2023 – All rights reserved
---------------------- Page: 1 ----------------------
ISO/DISFDIS 105-B04:2023(E)
© ISO [year] 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO'sISO’s member body in the country of the requester.
ISO Copyright Office copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Email: copyright@iso.org
E-mail: copyright@iso.org
Website: www.iso.orgwww.iso.org
Published in Switzerland.
ii © ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/DIS FDIS 105-B04:2023(E)
Contents
Foreword . vi
Introduction. vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Materials . 2
5.1 Blue wool references . 2
5.2 Glass case for blue wool references . 2
5.3 Specimen mounting cards . 2
5.4 Specimen covers . 2
5.5 Specimen holders . 2
5.6 Grey scale for assessing change in colour . 2
6 Apparatus . 3
6.1 Laboratory light source . 3
6.1.1 General . 3
6.1.2 Spectral irradiance . 3
6.2 Test chamber . 4
6.3 Radiometer . 4
6.4 Temperature sensors . 5
6.4.1 General . 5
6.4.2 Chamber air temperature thermometer .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.