ISO 3838:2004/Amd 1

Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods — Amendment 1

Pétrole brut et produits pétroliers liquides ou solides — Détermination de la masse volumique ou de la densité — Méthodes du pycnomètre à bouchon capillaire et du pycnomètre bicapillaire gradué — Amendement 1

General Information

• Status: Not Published
• ICS: 75.080 - Petroleum products in general
• Technical Committee: ISO/TC 28/SC 2 - Measurement of petroleum and related products
• Drafting Committee: ISO/TC 28/SC 2 - Measurement of petroleum and related products
• Current Stage: 6000 - International Standard under publication
• Completion Date: 15-Nov-2023

Relations

• Amends: ISO 3838:2004 - Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
• Effective Date: 22-Apr-2023

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 3838
Second edition
2004-05-01
AMENDMENT 1
Crude petroleum and liquid or solid
petroleum products — Determination
of density or relative density —
Capillary-stoppered pyknometer and
graduated bicapillary pyknometer
methods
AMENDMENT 1
Pétrole brut et produits pétroliers liquides ou solides —
Détermination de la masse volumique ou de la densité — Méthodes
du pycnomètre à bouchon capillaire et du pycnomètre bicapillaire
gradué
AMENDEMENT 1
PROOF/ÉPREUVE
Reference number
ISO 3838:2004/Amd.1:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 3838:2004/Amd.1:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 3838:2004/Amd.1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use
of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in resp
...

Style Definition
ISO 3838:2004/DAMPRF Amd 1:2023(E)
...
Formatted: Font: 14 pt, Bold
ISO /TC 28/SC 2/WG 12
Formatted: Left: 53.85 pt, Right: 53.85 pt, Bottom:
28.35 pt, Gutter: 0 pt, Section start: New page, Header
Secretariat: BSI
distance from edge: 36 pt, Footer distance from edge:
36 pt
Date: 2023-08-2310-18
Formatted: Font: 14 pt, Bold
Formatted: zzCover large
Formatted
...
Formatted: Cover Title_A1
Crude petroleum and liquid or solid petroleum products —
Determination of density or relative density — Capillary-
stoppered pyknometer and graduated bicapillary pyknometer
methods
AMENDMENT 1
AMENDMENT 1
Pétrole brut et produits pétroliers liquides ou solides — Détermination de la masse volumique ou de la
densité — Méthodes du pycnomètre à bouchon capillaire et du pycnomètre bicapillaire gradué
AMENDEMENT 1
FDIS stage

---------------------- Page: 1 ----------------------
ISO 3838:2004/DAMPRF Amd 1:2023(E)
Formatted: Font: 11 pt
Formatted: Header, Space After: 0 pt, Line spacing:
single
© ISO 20232004 Formatted: Font: 11 pt
Formatted: Font: 11 pt
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, Formatted: Default Paragraph Font
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved
ii © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 3838:2004/DAMPRF Amd 1:2023(E)
Formatted: Font: 11 pt
Formatted: Font: 11 pt
Formatted: Font: 11 pt
Foreword
Formatted: Header, Left, Space After: 0 pt, Line
spacing: single
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out Formatted: Adjust space between Latin and Asian text,
Adjust space between Asian text and numbers
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Formatted: English (United Kingdom)
ISO draws attention to the possibility that the implementation of this document may involve the use of
(a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice
Formatted: Font color: Auto
of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents.www.iso.org/patents. ISO shall not be held responsible for
identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
Formatted: English (United Kingdom)
Field Code Changed
This document was prepared by Technical Committee ISO/TC 28, Petroleum and related products, fuels
Formatted: English (United Kingdom)
and lubricants from natural or synthetic sources, Subcommittee SC 2 Measurement of petroleum and
related products, in collaboration with the European Committee for Standardization (CEN) Technical
Formatted: Adjust space between Latin and Asian text,
Committee CEN/TC 19, Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic
Adjust space between Asian text and numbers
and biological origin, in accordance w
...