ISO 19093:2018/Amd 1:2020
(Amendment)Photography — Digital cameras — Measuring low-light performance — Amendment 1: Chroma decrease calculation
Photography — Digital cameras — Measuring low-light performance — Amendment 1: Chroma decrease calculation
Photographie — Caméras numériques — Mesurage des performances dans des conditions de faible luminosité — Amendement 1: Calcul de la diminution de la chrominance
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 19093
First edition
2018-09
AMENDMENT 1
2020-06
Photography — Digital cameras —
Measuring low-light performance
AMENDMENT 1: Chroma decrease
calculation
Photographie — Caméras numériques — Mesurage des performances
dans des conditions de faible luminosité
AMENDEMENT 1: Calcul de la diminution de la chrominance
Reference number
ISO 19093:2018/Amd.1:2020(E)
©
ISO 2020
---------------------- Page: 1 ----------------------
ISO 19093:2018/Amd.1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 19093:2018/Amd.1:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held
...
INTERNATIONAL ISO
STANDARD 19093
First edition
2018-09
AMENDMENT 1
ISO pub-date
Photography — Digital cameras —
Measuring low-light performance
AMENDMENT 1: Chroma decrease
calculation
Photographie — Caméras numériques — Mesurage des performances
dans des conditions de faible luminosité
AMENDEMENT 1: Calcul de la diminution de la chrominance
PROOF/ÉPREUVE
Reference number
ISO 19093:2018/Amd.1:2020(E)
©
ISO 2020
---------------------- Page: 1 ----------------------
ISO 19093:2018/Amd.1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii PROOF/ÉPREUVE © ISO 2020 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 19093:2018/Amd.1:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.