ISO 15645:2002/Amd 1:2013
(Amendment)Road construction and maintenance equipment — Road milling machinery — Terminology and commercial specifications — Amendment 1
Road construction and maintenance equipment — Road milling machinery — Terminology and commercial specifications — Amendment 1
Équipement pour la construction et l'entretien des routes — Fraiseuses — Terminologie et spécifications commerciales — Amendement 1
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 15645
First edition
2002-05-01
AMENDMENT 1
2013-01-15
Road construction and maintenance
equipment — Road milling
machinery — Terminology and
commercial specifications
AMENDMENT 1
Équipement pour la construction et l’entretien des routes —
Fraiseuses — Terminologie et spécifications commerciales
AMENDEMENT 1
Reference number
ISO 15645:2002/Amd.1:2013(E)
©
ISO 2013
---------------------- Page: 1 ----------------------
ISO 15645:2002/Amd.1:2013(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the
address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 15645:2002/Amd.1:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 15645:2002 was prepared by Technical Committee ISO/TC 195, Building construction
machinery and equipment.
© ISO 2013 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 15645:2002/Amd.1:2013(E)
Road construction and maintenance equipment — Road
milling machinery — Terminology and commercial
specifications
AMENDMENT 1
Page 1, term 2.1
In the definition, replace the word “mill” by “remove” and add the phrase “by a milling action” at the
definition’s end.
Page 1, term 2.5
In the term itself, replace the phrase “make a cordon” by the word “windrow”.
In the Note attached to the definition, replace “cordon” by “windrow”.
Page 2, 3.1, General
In the fourth list item, replace “cordon” by “windrow”.
Page 2, 3.2.1, Traction and tr
...
FINAL
ISO
AMENDMENT
DRAFT
15645:2002
FDAM 1
ISO/TC 195
Road construction and maintenance
Secretariat: DIN
equipment — Road milling
Voting begins on:
2012-09-19 machinery — Terminology and
commercial specifications
Voting terminates on:
2012-11-19
AMENDMENT 1
Équipement pour la construction et l’entretien des routes —
Fraiseuses — Terminologie et spécifications commerciales
AMENDEMENT 1
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO 15645:2002/FDAM 1:2012(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2012
---------------------- Page: 1 ----------------------
ISO 15645:2002/FDAM 1:2012(E)
Copyright notice
This ISO document is a Draft International Standard and is copyrightprotected by ISO. Except as
permitted under the applicable laws of the user’s country, neither this ISO draft nor any extract
from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
Email copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO 2012 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 15645:2002/FDAM 1:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and nongovernmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 15645:2002 was prepared by Technical Committee ISO/TC 195, Building construction
machinery and equipment.
© ISO 2012 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 15645:2002/FDAM 1:2012(E)
Road construction and maintenance equipment — Road
milling machinery — Terminology and commercial
specifications
AMENDMENT 1
Page 1, t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.