ISO/TR 10303-307:2000

Industrial automation systems and integration — Product data representation and exchange — Part 307: Abstract test suite: Sheet metal die planning and design

Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 307: Suite d'essais abstraits: Conception et planification de matrices de tôle

General Information

• Status: Published
• Publication Date: 16-Feb-2000
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: ISO/TC 184/SC 4 - Industrial data
• Drafting Committee: ISO/TC 184/SC 4/WG 12 - STEP product modelling and resources
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 01-May-2015

Standards Content (Sample)

TECHNICAL ISO/TR
REPORT 10303-307
First edition
2000-02-01
Industrial automation systems and
integration — Product data representation
and exchange —
Part 307:
Abstract test suite: Sheet metal die
planning and design
Systèmes d'automatisation industrielle et intégration — Représentation et
échange de données de produits —
Partie 307: Suite d'essais abstraits: Conception et planification de matrices
de tôle
Reference number
ISO/TR 10303-307:2000(E)
©
ISO 2000

---------------------- Page: 1 ----------------------
ISO/TR 10303-307:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 734 10 79
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO 2000 – All rights reserved

---------------------- Page: 2 ----------------------
©ISO ISO/TR 10303-307:2000(E)
— implementation under test (IUT);
— postprocessor;
— preprocessor;
— test purpose;
— verdict criteria.
3.3 Terms defined in ISO 10303-207
This part of ISO 10303 makes use of the following terms defined in ISO 10303-207:
— cam;
— die;
— die face;
— die set;
— die structure;
— feature;
— feature property;
— hard aid;
— in-process;
— mating die;
— part process plan;
— sheet metal;
— sheet metal part;
— stamping press.
3.4 Other definitions
For the purposes of this part of ISO 10303, the following definitions apply:
3.4.1 application element (AE): an application object, attribute, or assertion defining the information
requirements in clause 4 of an AP.
3

---------------------- Page: 3 ----------------------
ISO/TR 10303-307:2000(E) ©ISO
3.4.2 domain test purpose: a type of test purpose that is based on general requirements of the
application domain of the application protocol.
3.4.3 external reference test purpose: a type of test purpose that is based on an external standard
referenced by the application protocol.
3.4.4 input specification: a description of the information to be used in preprocessor conformance
testing to build the required model to satisfy the test purpose and verdict criteria.
3.5 Abbreviations
For the purposes of this part of ISO 10303, the following abbreviations apply:
ATC Abstract Test Case
ATS Abstract Test Suite
AE Application Element
AIM Application Interpreted Model
AP Application Protocol
ARM Application Reference Model
CC Conformance Class
IUT Implementation Under Test
SI International System of Units
B-rep Boundary representation
CSG Constructive Solid Geometry
4 Test purposes
This clause specifies the test purposes for this part of ISO 10303. Test purposes in 4.1 and 4.2 are derived
from the information requirements contained in clause 4 of ISO 10303-207 and the AIM EXPRESS
schema in annex A of ISO 10303-207. Each test purpose statement identifies some specific element
from the AEs or the AIM. Every test purpose statement implicitly requires that the identified element,
as specified in the test purpose statement, will be correctly instantiated by the implementation under test.
4.1 Application element test purposes
AE test purposes are individually identified by the prefix “ae” in the test purpose number.  Each test
purpose derived from the information requirements shall be interpreted as given in the following
4

---------------------- Page: 4 ----------------------
©ISO ISO/TR 10303-307:2000(E)
statement: the IUT shall preserve the semantic associated with the unique application element from
which the test purpose was derived. This implies that the semantics of the application element are
preserved by the IUT between the input and output of a test, according to the reference path specified
in the mapping table of the AP. AE test purposes apply to the input specifications of both preprocessor
and postprocessor test cases. AE test purposes are derived from the AP information requirements as
follows:
— application objects (see 4.2 of ISO 10303-207). A test purpose derived from an application
object is a simple statement of the object’s name. Each application object test purpose is
documented in a separate subclause.
— application objects with categorisations (subtypes) (see 4.2 of ISO 10303-207). Test purposes
derived from application objects with categorisations are statements of the application object name
as a specific subtype.
— application object attributes (see 4.2 of ISO 10303-207). Test purposes derived from application
object attributes are statements of the application object name with a specific attribute name.
— application assertions (see 4.3 of ISO 10303-207). Test purposes derived from application
assertions are statements describing the relationship between two application objects. Application
assertion test purposes address the directions of relationships as well as the number (cardinality) of
relationships.

Each application object test purpose is listed as a separate subclause, with its related application object
attribute test purposes and assertion test purposes.
4.1.1 Angle_distance_dimension
ae1 Angle_distance_dimension
ae2 Angle_distance_dimension with clockwise = EQUAL
ae3 Angle_distance_dimension with clockwise = SMALL
ae4 Angle_distance_dimension with clockwise = LARGE
ae5 Angle_distance_dimension with orientation = EQUAL
ae6 Angle_distance_dimension with orientation = SMALL
ae7 Angle_distance_dimension with orientation = LARGE
4.1.2 Assembly_component_relationship
ae57 Assembly_component_relationship (6.18)
ae58 Assembly_component_relationship with component_quantity (6.18)
ae59 Assembly_component_relationship zero Assembly_component_relationship (6.18)
ae60 Assembly_component_relationship one Assembly_component_relationship
ae61 Assembly_component_relationship many Assembly_component_relationship
ae62 Assembly_component_relationship zero
Shape_definition (6.18)
ae63 Assembly_component_relationship one
Shape_definition
ae64 Assembly_component_relationship many
Shape_definition
5

---------------------- Page: 5 ----------------------
ISO/TR 10303-307:2000(E) ©ISO
ae65 Assembly_component_relationship zero Assembly_component_relationship
(6.18)
ae66 Assembly_component_relationship one Assembly_component_relationship
ae67 Assembly_component_relationship many Assembly_component_relationship
4.1.3 Change_order
ae117 Change_order (6.4)
ae118 Change_order with change_design_location (6.4)
ae119 Change_order with implementor (6.4)
ae120 Change_order zero Work_item (6.4)
ae121 Change_order one Work_item
ae122 Change_order many Work_item
ae123 Change_order zero Work_item (6.4)
ae124 Change_order one Work_item
ae125 Change_order many Work_item
4.1.4 Change_request
ae175 Change_request (6.2, 6.4)
ae176 Change_request with problem_change_description (6.2, 6.4)
ae177 Change_request with recommended_solution (6.2 6.4)
4.1.5 Coincidence_defaults
ae227 Coincidence_defaults (6.10, 6.11, 6.12)
ae228 Coincidence_defaults with position (6.10, 6.11, 6.12)
ae229 Coincidence_defaults with angle
ae230 Coincidence_defaults zero Shape_definition (6.10, 6.11, 6.12)
ae231 Coincidence_defaults one Shape_definition
ae232 Coincidence_defaults many Shape_definition
4.1.6 Curve_distance_dimension
ae282 Curve_distance_dimension
4.1.7 Curve_length_size_dimension
ae332 Curve_length_size_dimension
4.1.8 Designed_item
ae382 Designed_item (6.5, 6.6, 6.8, 6.9, 6.10, 6.11, 6.12, 6.16, 6.17, 6.18, 6.19, 6.25)
ae383 Designed_item with creation_date_and_time (6.5, 6.6, 6.8, 6.9, 6.10, 6.11, 6.12, 6.16, 6.17, 6.18,
6.19, 6.25)
ae384 Designed_item with data_exchange_history (6.5, 6.6, 6.8, 6.9, 6.10, 6.11, 6.12, 6.16, 6.17, 6.18,
6.19, 6.25)
ae385 Designed_item with data_ownership (6.5, 6.6, 6.8, 6.9, 6.10, 6.11, 6.12, 6.16, 6.17, 6.18, 6.19,
6

---------------------- Page: 6 ----------------------
©ISO ISO/TR 10303-307:2000(E)
6.25)
ae386 Designed_item with designer (6.5, 6.6, 6.8, 6.9, 6.10, 6.11, 6.12, 6.16, 6.17, 6.18, 6.19, 6.25)
ae387 Designed_item with generating_system_information (6.5, 6.6, 6.8, 6.9, 6.10, 6.11, 6.12, 6.16, 6.17,
6.18, 6.19, 6.25)
ae388 Designed_item with media_requirements (6.5, 6.6, 6.8, 6.9, 6.10, 6.11, 6.12, 6.16, 6.17, 6.18, 6.19,
6.25)
4.1.9 Diameter_size_dimension
ae438 Diameter_size_dimension
4.1.10 Die
ae488 Die (6.6, 6.7, 6.8, 6.9, 6.15, 6.18, 6.19, 6.21)
4.1.11 Die_definition
ae538 Die_definition (6.6, 6.7, 6.8, 6.9, 6.15, 6.18, 6.19, 6.21)
ae539 Die_definition with die_function_description (6.6, 6.7, 6.8, 6.9, 6.15, 6.18, 6.19, 6.21)
ae540 Die_definition with die_layout_specification_reference (6.6, 6.7, 6.8, 6.9, 6.15, 6.18, 6.19, 6.21)
ae541 Die_definition with die_structure_specification_reference (6.6, 6.7, 6.8, 6.9,6.15, 6.18, 6.19, 6.21)
ae542 Die_definition with die_weight (6.6, 6.7, 6.8, 6.9, 6.15, 6.18, 6.19, 6.21)
ae543 Die_definition with pattern_casting_specification (6.6, 6.7, 6.8, 6.9, 6.18, 6.19, 6.21)
ae544 Die_definition zero Die_definition_constraint (6.6, 6.7, 6.8, 6.9, 6.18, 6.19,
6.21)
ae545 Die_definition one Die_definition_constraint (6.15)
ae546 Die_definition many Die_definition_constraint
ae547 Die_definition zero Process_operation (6.6,6.7, 6.8, 6.9, 6.18, 6.19, 6.21)
ae548 Die_definition one Process_operation
ae549 Die_definition many Process_operation
4.1.12 Die_definition_constraint
ae599 Die_definition_constraint (6.15)
ae600 Die_definition_constraint with constraint_description (6.15)
ae601 Die_definition_constraint zero Die_definition (6.15)
ae602 Die_definition_constraint one Die_definition (6.15)
ae603 Die_definition_constraint many Die_definition
4.1.13 Die_shape_definition
ae653 Die_shape_definition (6.8, 6.9)
ae654 Die_shape_definition zero Shape_tolerance
ae655 Die_shape_definition one Shape_tolerance
ae656 Die_shape_definition many Shape_tolerance
4.1.14 Dimension_tolerance_range
7

---------------------- Page: 7 ----------------------
ISO/TR 10303-307:2000(E) ©ISO
ae762 Dimension_tolerance_range
ae763 Dimension_tolerance_range with tolerance_fitting_type
ae764 Dimension_tolerance_range zero Tolerance_value
ae765 Dimension_tolerance_range one Tolerance_value
ae766 Dimension_tolerance_range many Tolerance_value
ae767 Dimension_tolerance_range zero Tolerance_value
ae768 Dimension_tolerance_range one Tolerance_value
ae769 Dimension_tolerance_range many Tolerance_value
ae770 Dimension_tolerance_range zero Dimensional_representation
ae771 Dimension_tolerance_range one Dimensional_representation
ae772 Dimension_tolerance_range many Dimensional_-
representation
ae773 Dimension_tolerance_range zero Dimensional_representation
ae774 Dimension_tolerance_range one Dimensional_representation
ae775 Dimension_tolerance_range many Dimensional_-
representation
4.1.15 Dimensional_representation
ae706 Dimensional_representation (6.10)
ae707 Dimensional_representation zero Dimension_tolerance_range (6.10)
ae708 Dimensional_representation one Dimension_tolerance_range
ae709 Dimensional_representation many Dimension_tolerance_range
ae710 Dimensional_representation zero Dimension_tolerance_range (6.10)
ae711 Dimensional_representation one Dimension_tolerance_range
ae712 Dimensional_representation many Dimension_tolerance_range
4.1.16 Distance_dimension
ae825 Distance_dimension (6.10)
4.1.17 Envelope_relationship
ae875 Envelope_relationship
4.1.18 External_item_reference
ae925 External_item_reference (6.7, 6.10, 6.11, 6.12, 6.20)
ae926 External_item_reference with manual_reference_description (6.7, 6.10, 6.11, 6.12, 6.20)
ae927 External_item_reference with name (6.7, 6.10, 6.11, 6.12, 6.20)
ae928 External_item_reference with needed_modifications (6.7, 6.10, 6.11, 6.12, 6.20)
4.1.19 External_order
ae978 External_order (6.4)
ae979 External_order with contractual_requirement (6.4)
ae980 External_order with purchase_order_number (6.4)
ae981 External_order with purchasing_agent (6.4)
8

---------------------- Page: 8 ----------------------
©ISO ISO/TR 10303-307:2000(E)
ae982 External_order with supplier_identification (6.4)
ae983 External_order zero Start_order (6.4)
ae984 External_order one Start_order
ae985 External_order many Start_order
4.1.20 Feature
ae1035 Feature (6.10)
ae1036 Feature with designer
ae1037 Feature with feature_name (6.10)
ae1038 Feature zero Feature_property (6.10)
ae1039 Feature one Feature_property
ae1040 Feature many Feature_property
ae1041 Feature zero Shape_definition
ae1042 Feature one Shape_definition (6.10)
ae1043 Feature many Shape_definition
ae1044 Feature zero Item_definition (6.10)
ae1045 Feature one Item_definition
ae1046 Feature many Item_definition
4.1.21 Feature_property
ae1096 Feature_property
ae1097 Feature_property with property_description
ae1098 Feature_property with property_type
ae1099 Feature_property zero Feature
ae1100 Feature_property one Feature
ae1101 Feature_property many Feature
4.1.22 Feature_shape_definition
ae1151 Feature_shape_definition
ae1152 Feature_shape_definition zero Shape_tolerance
ae1153 Feature_shape_definition one Shape_tolerance
ae1154 Feature_shape_definition many Shape_tolerance
4.1.23 Final_part_definition
ae1204 Final_part_definition (6.5, 6.10, 6.11, 6.12, 6.16, 6.17, 6.20, 6.21, 6.25)
ae1205 Final_part_definition zero Part_on_product (6.5, 6.10, 6.11, 6.12, 6.16,
6.17, 6.20, 6.21)
ae1206 Final_part_definition one Part_on_product (6.25)
ae1207 Final_part_definition many Part_on_product
ae1208 Final_part_definition zero Part_process_plan (6.5, 6.10,6.11, 6.12,
6.16, 6.17, 6.20, 6.21, 6.25)
ae1209 Final_part_definition one Part_process_plan
ae1210 Final_part_definition many Part_process_plan
9

---------------------- Page: 9 ----------------------
ISO/TR 10303-307:2000(E) ©ISO
4.1.24 In_process_part_definition
ae1366 In_process_part_definition (6.10, 6.11, 6.12)
ae1367 In_process_part_definition zero Process_operation (6.10, 6.11, 6.12)
ae1368 In_process_part_definition one Process_operation
ae1369 In_process_part_definition many Process_operation
4.1.25 Input_item_die_relationship
ae1260 Input_item_die_relationship (6.21)
ae1261 Input_item_die_relationship zero Shape_-
definition (6.21)
ae1262 Input_item_die_relationship one Shape_-
definition
ae1263 Input_item_die_relationship many Shape_-
definition
4.1.26 Internal_order
ae1313 Internal_order (6.3)
ae1314 Internal_order with authorized_hours (6.3)
ae1315 Internal_order with charge_number (6.3)
ae1316 Internal_order with source_department (6.3)
4.1.27 Item
ae1419 Item (6.5, 6.6, 6.7, 6.8, 6.9, 6.10, 6.11, 6.12, 6.15, 6.16, 6.17, 6.18, 6.19, 6.20, 6.21, 6.22, 6.25)
ae1420 Item with item_description (6.5, 6.6, 6.7, 6.8, 6.9, 6.10, 6.11, 6.12, 6.15, 6.16, 6.17, 6.18, 6.19,
6.20, 6.21, 6.22, 6.25)
ae1421 Item with item_name (6.5, 6.6, 6.7, 6.8, 6.9, 6.10, 6.11, 6.12, 6.15, 6.16, 6.17, 6.18, 6.19, 6.20,
6.21, 6.22, 6.25)
ae1422 Item with item_number (6.5, 6.6, 6.7, 6.8, 6.9, 6.10, 6.11, 6.12, 6.15, 6.16, 6.17, 6.18, 6.19, 6.20,
6.21, 6.22, 6.25)
ae1423 Item zero Item_classification (6.25)
ae1424 Item one Item_classification (6.15, 6.20, 6.21, 6.22)
ae1425 Item many Item_classification (6.5, 6.6, 6.7, 6.8, 6.9, 6.10, 6.11, 6.12, 6.16,
6.17, 6.18, 6.19, 6.20, 6.25)
ae1426 Item zero Item_version (6.22)
ae1427 Item one Item_version (6.15, 6.25)
ae1428 Item many Item_version (6.5, 6.6, 6.7, 6.8, 6.9, 6.10, 6.11, 6.12, 6.16, 6.17,
6.18, 6.19, 6.20, 6.21, 6.25)
4.1.28 Item_classification
ae1478 Item_classification (6.5, 6.6, 6.7, 6.8, 6.9, 6.10, 6.11, 6.12, 6.15, 6.16, 6.17, 6.18, 6.19, 6.20, 6.21,
6.22, 6.25)
ae1479 Item_classification with classification_description (6.5, 6.6, 6.7, 6.8, 6.9, 6.10, 6.11, 6.12, 6.15,
6.16, 6.17, 6.18, 6.19, 6.20, 6.21, 6.22, 6.25)
10

---------------------- Page: 10 ----------------------
©ISO ISO/TR 10303-307:2000(E)
ae1480 Item_classification with classification_identification (6.5, 6.6, 6.7, 6.8, 6.9, 6.10, 6.11, 6.12, 6.15,
6.16, 6.17, 6.18, 6.19, 6.20, 6.21, 6.22, 6.25)
ae1481 Item_classification with classification_name (6.5, 6.6, 6.7, 6.8, 6.9, 6.10, 6.11, 6.12, 6.15, 6.16,
6.17, 6.18, 6.19, 6.20, 6.21, 6.22, 6.25)
ae1482 Item_classification zero Item_classification_relationship (6.5, 6.6, 6.7, 6.8, 6.9,
6.10, 6.11, 6.12, 6.15, 6.16, 6.17, 6.18, 6.19, 6.20, 6.21, 6.25)
ae1483 Item_classification one Item_classification_relationship (6.22)
ae1484 Item_classification many Item_classification_relationship
ae1485 Item_classification zero Item_classification_relationship (6.5, 6.6, 6.7, 6.8, 6.9,
6 6.10, 6.11, 6.12, 6.15, 6.16, 6.17, 6.18, 6.19, 6.20, 6.21, 6.25)
ae1486 Item_classification one Item_classification_relationship (6.22)
ae1487 Item_classification many Item_classification_relationship
ae1488 Item_classification zero Item
ae1489 Item_classification one Item (6.5, 6.6,6.7, 6.8, 6.9, 6.10, 6.11, 6.12, 6.15, 6.16, 6.17,
6.18, 6.19, 6.20, 6.21, 6.25)
ae1490 Item_classification many Item (6.16, 6.17, 6.18, 6.19, 6.22)
4.1.29 Item_classification_relationship
ae1540 Item_classification_relationship (6.22)
ae1541 Item_classification_relationship with relationship_description (6.22)
ae1542 Item_classification_relationship zero Item_classification
ae1543 Item_classification_relationship one Item_classification
ae1544 Item_classification_relationship many Item_classification (6.22)
ae1545 Item_classification_relationship zero Item_classification
ae1546 Item_classification_relationship one Item_classification
ae1547 Item_classification_relationship many Item_classification (6.22)
4.1.30 Item_definition
ae1597 Item_definition (6.5, 6.6, 6.7, 6.8, 6.9, 6.16, 6.17, 6.18, 6.19, 6.20, 6.21, 6.25)
ae1598 Item_definition with approval (6.5, 6.6, 6.7, 6.8, 6.9, 6.16, 6.17, 6.18, 6.19, 6.20, 6.21, 6.25)
ae1599 Item_definition with approval_status (6.5, 6.6, 6.7, 6.8, 6.9, 6.16, 6.17, 6.18, 6.19, 6.20, 6.21,
6.25)
ae1600 Item_definition with definition_description (6.5, 6.6, 6.7, 6.8, 6.9, 6.16, 6.17, 6.18, 6.19, 6.20,
6.21, 6.25)
ae1601 Item_definition with procurement_information (6.5, 6.6, 6.7, 6.8, 6.9, 6.16, 6.17, 6.18, 6.19, 6.20,
6.21, 6.25)
ae1602 Item_definition with proprietary_security_usage_information (6.5, 6.6, 6.7, 6.8, 6.9, 6.16, 6.17,
6.18, 6.19, 6.20, 6.21, 6.25)
ae1603 Item_definition zero Feature
ae1604 Item_definition one Feature (6.5, 6.6, 6.7, 6.8, 6.9, 6.16, 6.17, 6.18, 6.19, 6.20, 6.21,
6.25)
ae1605 Item_definition many Feature
ae1606 Item_definition zero Item_definition_relationship
ae1607 Item_definition one Item_definition_relationship (6.5, 6.6, 6.7, 6.8, 6.9, 6.16, 6.17,
6.18, 6.19, 6.20, 6.21, 6.25)
ae1608 Item_definition many Item_definition_relationship
ae1609 Item_definition zero Item_definition_relationship
11

---------------------- Page: 11 ----------------------
ISO/TR 10303-307:2000(E) ©ISO
ae1610 Item_definition one Item_definition_relationship (6.5, 6.6, 6.7, 6.8, 6.9, 6.16,
6.17, 6.18, 6.19, 6.20, 6.21, 6.25)
ae1611 Item_definition many Item_definition_relationship
ae1612 Item_definition zero Shape_definition
ae1613 Item_definition one Shape_definition (6.5, 6.6, 6.7, 6.8, 6.9, 6.16,
6.17, 6.18, 6.19, 6.20, 6.21, 6.25)
ae1614 Item_definition many Shape_definition
ae1615 Item_definition zero Item_version
ae1616 Item_definition one Item_version (6.5, 6.6, 6.7, 6.8, 6.9, 6.16, 6.17, 6.18, 6.19, 6.20,
6.21, 6.25)
ae1617 Item_definition many Item_version
4.1.31 Item_definition_relationship
ae1667 Item_definition_relationship (6.10, 6.11, 6.12, 6.16, 6.17, 6.18, 6.19, 6.20, 6.21)
ae1668 Item_definition_relationship with relationship_description (6.10, 6.11, 6.12, 6.16, 6.17, 6.18,
6.19, 6.20, 6.21)
ae1669 Item_definition_relationship zero Item_definition (6.10, 6.11, 6.12, 6.16, 6.17,
6.20, 6.21)
ae1670 Item_definition_relationship one Item_definition (6.18, 6.19)
ae1671 Item_definition_relationship many Item_definition
ae1672 Item_definition_relationship zero Item_definition (6.10, 6.11, 6.12, 6.16, 6.17,
6.20, 6.21)
ae1673 Item_definition_relationship one Item_definition (6.18, 6.19)
ae1674 Item_definition_relationship many Item_definition
4.1.32 Item_version
ae1724 Item_version (6.5, 6.6, 6.7, 6.8, 6.9, 6.10, 6.11, 6.12, 6.15, 6.16, 6.17, 6.18, 6.19, 6.20, 6.21, 6.25)
ae1725 Item_version with approval (6.5, 6.6, 6.7, 6.8, 6.9, 6.10, 6.11, 6.12, 6.15, 6.16, 6.17, 6.18, 6.19,
6.20, 6.21, 6.25)
ae1726 Item_version with approval_status (6.5, 6.6, 6.7, 6.8, 6.9, 6.10, 6.11, 6.12, 6.15, 6.16, 6.17, 6.18,
6.19, 6.20, 6.21,6.25)
ae1727 Item_version with description (6.5, 6.6, 6.7, 6.8, 6.9, 6.10, 6.11, 6.12, 6.15, 6.16, 6.17, 6.18, 6.19,
6.20, 6.21, 6.25)
ae1728 Item_version with item_version_identification (6.5, 6.6, 6.7, 6.8, 6.9, 6.10,6.11, 6.12, 6.15, 6.16,
6.17, 6.18, 6.19, 6.20, 6.21, 6.25)
ae1729 Item_version with revision_date_and_time (6.5, 6.6, 6.7, 6.8, 6.9, 6.10, 6.11, 6.12, 6.16, 6.17,
6.18, 6.19, 6.20, 6.21, 6.25)
ae1730 Item_version zero Item_definition (6.10, 6.11, 6.12)
ae1731 Item_version one Item_definition (6.5,6.11, 6.12, 6.20, 6.25)
ae1732 Item_version many Item_definition (6.6, 6.7, 6.8, 6.9, 6.10, 6.15, 6.16, 6.17,
6.18, 6.19, 6.20, 6.21, 6.25)
ae1733 Item_version zero Item
ae1734 Item_version one Item (6.5, 6.6, 6.7, 6.8, 6.9, 6.10, 6.11, 6.12, 6.16, 6.17, 6.18, 6.19,
6.20, 6.21,6.25)
ae1735 Item_version many Item
4.1.33 Linear_distance_dimension
12

---------------------- Page: 12 ----------------------
©ISO ISO/TR 10303-307:2000(E)
ae1785 Linear_distance_dimension (6.10)
4.1.34 Made_in_house
ae1835 Made_in_house (6.5, 6.6)
4.1.35 Make_similar_to_relationship
ae1885 Make_similar_to_relationship (6.16)
4.1.36 Marketable_assembly
ae1935 Marketable_assembly (6.25)
ae1936 Marketable_assembly with model_identification (6.25)
ae1937 Marketable_assembly with production_year (6.25)
ae1938 Marketable_assembly with style_identification (6.25)
ae1939 Marketable_assembly zero Part_on_product (6.25)
ae1940 Marketable_assembly one Part_on_product
ae1941 Marketable_assembly many Part_on_product
4.1.37 Material
ae1991 Material (6.20)
4.1.38 Material_definition
ae2041 Material_definition (6.20)
ae2042 Material_definition with material_description (6.20)
ae2043 Material_definition with material_specification (6.20)
ae2044 Material_definition zero Part_definition (6.20)
ae2045 Material_definition one Part_definition
ae2046 Material_definition many Part_definition
4.1.39 Material_shape_definition
ae2096 Material_shape_definition
ae2097 Material_shape_definition zero Shape_tolerance
ae2098 Material_shape_definition one Shape_tolerance
ae2099 Material_shape_definition many Shape_tolerance
4.1.40 Mating_relationship
ae2149 Mating_relationship
ae2150 Mating_relationship zero Shape_definition
ae2151 Mating_relationship one Shape_definition
ae2152 Mating_relationship many Shape_definition
13

---------------------- Page: 13 ----------------------
ISO/TR 10303-307:2000(E) ©ISO
4.1.41 Part
ae2202 Part (6.5, 6.10, 6.11, 6.12, 6.15, 6.17, 6.20, 6.21, 6.22, 6.25)
4.1.42 Part_definition
ae2252 Part_definition (6.5, 6.10, 6.11, 6.12, 6.16, 6.17, 6.20, 6.21, 6.25)
ae2253 Part_definition zero Material_definition (6.5, 6.10, 6.11, 6.12, 6.16,
6.17, 6.20, 6.21, 6.25)
ae2254 Part_definition one Material_definition
ae2255 Part_definition many Material_definition
4.1.43 Part_on_product
ae2305 Part_on_product (6.25)
ae2306 Part_on_product zero Part_on_product_location
ae2307 Part_on_product one Part_on_product_location (6.25)
ae2308 Part_on_product many Part_on_product_location
ae2309 Part_on_product zero Production_effectivity
ae2310 Part_on_product one Production_effectivity (6.25)
ae2311 Part_on_product many Production_effectivity
ae2312 Part_on_product zero Final_part_definition
ae2313 Part_on_product one Final_part_definition (6.25)
ae2314 Part_on_product many Final_part_definition
ae2315 Part_on_product zero Marketable_assembly (6.25)
ae2316 Part_on_product one Marketable_assembly
ae2317 Part_on_product many Marketable_assembly
4.1.44 Part_on_product_location
ae2367 Part_on_product_location (6.25)
ae2368 Part_on_product_location with intraproduct_location (6.25)
ae2369 Part_on_product_location zero Part_on_product
ae2370 Part_on_product_location one Part_on_product (6.25)
ae2371 Part_on_product_location many Part_on_product
4.1.45 Part_process_plan
ae2421 Part_process_plan (6.13, 6.14, 6.15)
ae2422 Part_process_plan with approval (6.13, 6.14, 6.15)
ae2423 Part_process_plan with approval_status (6.13, 6.14, 6.15)
ae2424 Part_process_plan with creation_date_and_time (6.13, 6.14, 6.15)
ae2425 Part_process_plan with data_ownership (6.13, 6.14, 6.15)
ae2426 Part_process_plan with generating_system_information (6.13, 6.14, 6.15)
ae2427 Part_process_plan with part_process_version_identification (6.13, 6.14, 6.15)
ae2428 Part_process_plan with plan_status (6.13, 6.14, 6.15)
ae2429 Part_process_plan with planner (6.13, 6.14, 6.15)
ae2430 Part_process_plan with production_rate (6.13, 6.14)
14

---------------------- Page: 14 ----------------------
©ISO ISO/TR 10303-307:2000(E)
ae2431 Part_process_plan with proprietary_security_usage_information (6.13, 6.14, 6.15)
ae2432 Part_process_plan with review_date_and_time (6.13, 6.14, 6.15)
ae2433 Part_process_plan with version_description (6.13, 6.15)
ae2434 Part_process_plan zero Part_process_plan (6.13, 6.14, 6.15)
ae2435 Part_process_plan one Part_process_plan
ae2436 Part_process_plan many Part_process_plan
ae2437 Part_process_plan zero Part_process_plan_version_-
relationship (6.13, 6.14, 6.15)
ae2438 Part_process_plan one Part_process_plan_version_relationship
ae2439 Part_process_plan many Part_process_plan_version_-
relationship
...