ISO/IEC 14496-4:2004/Amd 42:2014
(Amendment)Information technology — Coding of audio-visual objects — Part 4: Conformance testing — Amendment 42: Conformance testing of Multi-Resolution Frame Compatible Stereo Coding extension of AVC
Information technology — Coding of audio-visual objects — Part 4: Conformance testing — Amendment 42: Conformance testing of Multi-Resolution Frame Compatible Stereo Coding extension of AVC
Technologies de l'information — Codage des objets audiovisuels — Partie 4: Essai de conformité — Amendement 42: Essai de conformité de cadre multi-résolution stéréo compatible avec le codage extension de l'AVC
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 14496-4
Second edition
2004-12-15
AMENDMENT 42
2014-12-01
Information technology — Coding of
audio-visual objects —
Part 4:
Conformance testing
AMENDMENT 42: Conformance testing of
Multi-Resolution Frame Compatible Stereo
Coding extension of AVC
Technologies de l'information — Codage des objets audiovisuels —
Partie 4: Essai de conformité
AMENDEMENT 42: Essai de conformité de cadre multi-résolution
stéréo compatible avec le codage extension de l'AVC
Reference number
ISO/IEC 14496-4:2004/Amd.42:2014(E)
©
ISO/IEC 2014
---------------------- Page: 1 ----------------------
ISO/IEC 14496-4:2004/Amd.42:2014(E)
This CD-ROM contains:
1) the publication ISO/IEC 14496-4:2004/Amd.42:2014 in portable document format (PDF), which can
be viewed using Adobe® Acrobat® Reader;
2) electronic attachments for 14496-4:2004/Amd.42:2014.
Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any
means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission.
Permission can be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2014 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 14496-4:2001/Amd.42:2014(E)
Installation
If this
...
INTERNATIONAL ISO/IEC
STANDARD 14496-4
Second edition
2004-12-15
AMENDMENT 42
2014-12-01
Information technology — Coding of
audio-visual objects —
Part 4:
Conformance testing
AMENDMENT 42: Conformance testing
of Multi-Resolution Frame Compatible
Stereo Coding extension of AVC
Technologies de l’information — Codage des objets audiovisuels —
Partie 4: Essai de conformité
AMENDEMENT 42: Essai de conformité de cadre multi-résolution
stéréo compatible avec le codage extension de l’AVC
Reference number
ISO/IEC 14496-4:2004/Amd.42:2014(E)
©
ISO/IEC 2014
---------------------- Page: 1 ----------------------
ISO/IEC 14496-4:2004/Amd.42:2014(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2014 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 14496-4:2004/Amd.42:2014(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work. In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the national bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 14496-4 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information.
This Amendment establishes conformance test requirements for conformance to ITU-T Rec. H.264 |
ISO/IEC 14496-10.
In this Amendment, additional text to ITU-T Rec. H.264 | ISO/IEC 14496-4 is specified for testing the
conformance of ITU-T Rec. H.264.1 | ISO/IEC 14496-10 video decoders including in particular the MFC
High Profiles.
The following subclauses specify the normative tests for verifying conformance of ITU-T Rec. H.264 |
ISO/IEC 14496-10 video bitstreams and decoders. These normative tests make use of test data (bitstream
test suites) provided as an electronic annex to this document, and of the reference software decoder
specified in ITU-T Rec. H.264.2 | ISO/IEC 14496-5 with source code available in electronic format.
© ISO/IEC 2014 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/IEC 14496-4:2004/Amd.42:2014(E)
Information technology — Coding of audio-visual
objects —
Part 4:
Conformance testing
AMENDMENT 42: Conformance testing of Multi-Resolution
Frame Compatible Stereo Coding extension of AVC
In 10.6.5.7, add the following text at the end of the subclause:
A decoder that conforms to the MFC High profile at a specific level shall be capable of decoding all
bitstreams in which all active MVC sequence parameter sets have any of the following:
— profile_idc equal to 134
— profile_idc equal to 128
— profile_idc is equal to 118 and constraint_set5_flag is equal to 1
— profile_idc equal to 100 or 77
— profile_idc equal to 88 and constraint_set1_flag equal to 1
— profile_idc equal to 66 and constraint_set1_flag equal to 1
and in which level_idc or the combination of level_idc and constraint_set3_flag for all active MVC
sequence parameter sets represent a level less than or equal to the specific level. In addition to the
bitstreams defined in Table AMD42.1, a decoder that conforms to the MFC High profile shall be capable
of decoding the Main profile bitstreams specified in Table AMD6-1 and the High profile bitstreams
specified in Table AMD 9-2.
After 10.6.6.35.11, add the following text:
10.6.6.36 Test bitstreams — MFC High Profile
10.6.6.36.1 Test bitstream #MFCRFT-1
Specification: All slices are coded as I, P, or B slices. Only the first picture is coded as an IDR access unit.
Each view component contains only one slice. num_views_minus1 is equal to 1. mfc_format_idc is equal
to 0. default_grid_position_flag is equal to 1. rpu_filter_enabled_flag is equal to 1. rpu_field_processing_
flag is equal to 0. All NAL units are encapsulated into the byte stream format specified in Annex B in
ITU-T Rec. H.264 | ISO/IEC 14496-10.
Functional stage: Decoding of the base and enhancement view components and reconstruction of the
enhanced resolution stereo views with RPU Filter mode, using SbS base layer and default grid position.
Purpose: Check that the decoder can properly decode the base and enhancement view components and
reconstruct the enhanced resolution stereo views with RPU filter mode.
10.6.6.36.2 Test bitstream #MFCRFT-2
Specification: All slices are coded as I, P, or B slices. Only the first picture is coded as an IDR access unit.
Each view component contains only one slice. num_views_minus1 is equal to 1. mfc_format_idc is equal
to 0. default_grid_position_flag is equal to 1. rpu_filter_enabled_flag is equal to 0. rpu_field_processing_
© ISO 2014 – All rights reserved 1
---------------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.