IEC 81346-2:2009
(Main)Industrial systems, installations and equipment and industrial products — Structuring principles and reference designations — Part 2: Classification of objects and codes for classes
Industrial systems, installations and equipment and industrial products — Structuring principles and reference designations — Part 2: Classification of objects and codes for classes
IEC 81346-2:2009, published jointly by IEC and ISO defines classes and subclasses of objects based on a purpose- or task-related view of the objects, together with their associated letter codes to be used in reference designations. The classification is applicable for objects in all technical areas, e.g. electrical, mechanical and civil engineering as well as all branches of industry, e.g. energy, chemical industry, building technology, shipbuilding and marine technology, and can be used by all technical disciplines in any design process.
Systèmes industriels, installations et appareils, et produits industriels — Principes de structuration et désignations de référence — Partie 2: Classification des objets et codes pour les classes
La CEI 81346-2:2009 publiée conjointement par le CEI et l'ISO définit les classes et les sous-classes d'objets basées sur une vision des objets liée à l'objectif ou à la tâche concerné(e), ainsi que leurs lettres codes associées, à utiliser dans les désignations de référence. La classification est applicable aux objets appartenant à tous les domaines techniques, par exemple génie civil, électrique, mécanique et aussi bien que toutes les branches d'industrie, par exemple énergie, industrie chimique, technologie de la construction, construction navale et technologie marine et dans tout processus de conception.
General Information
Relations
Standards Content (Sample)
IEC 81346-2
Edition 1.0 2009-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial systems, installations and equipment and industrial products –
Structuring principles and reference designations –
Part 2: Classification of objects and codes for classes
Systèmes industriels, installations et appareils, et produits industriels –
Principes de structuration et désignations de référence –
Partie 2: Classification des objets et codes pour les classes
IEC 81346-2:2009
---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2009 IEC, Geneva, Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
---------------------- Page: 2 ----------------------
IEC 81346-2
Edition 1.0 2009-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial systems, installations and equipment and industrial products –
Structuring principles and reference designations –
Part 2: Classification of objects and codes for classes
Systèmes industriels, installations et appareils, et produits industriels –
Principes de structuration et désignations de référence –
Partie 2: Classification des objets et codes pour les classes
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
X
CODE PRIX
ICS 01.110; 29.020 ISBN 2-8318-1053-5
---------------------- Page: 3 ----------------------
– 2 – 81346-2 © IEC:2009
CONTENTS
FOREWORD.4
INTRODUCTION.6
0.1 General.6
0.2 Basic requirements for this standard .6
1 Scope.8
2 Normative references .8
3 Terms and definitions .8
4 Classification principles .8
4.1 General .8
4.2 Assigning objects to classes.9
5 Classes of objects .11
5.1 Classes of objects according to intended purpose or task.11
5.2 Subclasses of objects according to intended purpose or task .17
5.3 Classes of objects according to infrastructure .36
Annex A (informative) Object-classes related to a generic process .39
Annex B (informative) Object-classes related to objects in a generic infrastructure .41
Figure 1 – Constituent objects .7
Figure 2 – The basic concept.8
Figure 3 – Classification of objects in a measuring circuit .10
Figure A.1 – Object-classes related to a process .39
Figure B.1 – Object-classes related to objects in a generic infrastructure.42
Table 1 – Classes of objects according to their intended purpose or task (Codes A to D).12
Table 1 (continued, codes E to J).13
Table 1 (continued, codes K to P) .14
Table 1 (continued, codes Q to U) .15
Table 1 (continued, codes V to Z) .16
Table 2 – Definitions and letter codes of subclasses related to main classes (Class A).18
Table 2 (continued, class B) .19
Table 2 (continued, class C) .20
Table 2 (continued, class E) .21
Table 2 (continued, class F).22
Table 2 (continued, class G) .23
Table 2 (continued, class H) .24
Table 2 (continued, class K) .25
Table 2 (continued, class M) .26
Table 2 (continued, class P) .27
Table 2 (continued, class Q) .28
Table 2 (continued, class R) .29
Table 2 (continued, class S) .30
Table 2 (continued, class T).31
---------------------- Page: 4 ----------------------
81346-2 © IEC:2009 – 3 –
Table 2 (continued, class U) .32
Table 2 (continued, class V) .33
Table 2 (continued, class W).34
Table 2 (continued, class X) .35
Table 3 – Classes of infrastructure objects .37
Table 4 – Examples of branch-related classes B to U of Table 3 .38
---------------------- Page: 5 ----------------------
– 4 – 81346-2 © IEC:2009
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL SYSTEMS, INSTALLATIONS
AND EQUIPMENT AND INDUSTRIAL PRODUCTS –
STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS –
Part 2: Classification of objects and codes for classes
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 81346-2 has been prepared by IEC technical committee 3:
Information structures, documentation and graphical symbols and ISO technical committee
10: Technical product documentation.
It is published as a double logo standard.
This edition cancels and replaces the first edition of IEC 61346-2, published in 2000 and the
first edition of IEC/PAS 62400, published in 2005.
This edition includes the following technical changes with respect to IEC 61346-2 Ed.1:
• all rules concerning the application of letter codes have been removed as these should be
included in another publication dealing with the application of letter codes within reference
designations;
and, with respect to IEC/PAS 62400 Ed.1:
---------------------- Page: 6 ----------------------
81346-2 © IEC:2009 – 5 –
• the definitions of the sub-classes have been reviewed and made consistent;
• the basis for the sub-classification is indicated;
• some new subclasses for class B and class P have been added;
• the table of terms sorted according to the two-letter code has been removed;
The text of this standard is based on the following documents:
FDIS Report on voting
3/945/FDIS 3/957RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table. In ISO, the standard has been approved by 12 members
out of 13 having cast a vote.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of IEC 81346 series, formerly IEC 61346 series, published under the general
title Industrial systems, installations and equipment and industrial products – Structuring
principles and reference designations, can be found on the IEC website.
Future standards in this series will carry the new general number 81346. Numbers of existing
standards in this series will be updated at the time of the next edition.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under “http://webstore.iec.ch” in the
data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 7 ----------------------
– 6 – 81346-2 © IEC:2009
INTRODUCTION
0.1 General
The aim of this part of IEC 81346 is to establish classification schemes for objects with
associated letter codes which can be applied throughout all technical areas, e.g. electrical,
mechanical and civil engineering as well as all branches of industry, e.g. energy, chemical
industry, building technology, shipbuilding and marine technology. The letter codes are
intended for use with the rules for the construction of reference designations in accordance
with IEC 81346-1.
Annex A illustrates how objects may be classified according to their intended purpose or task
related to a generic process.
Annex B illustrates how objects may be classified according to their position in an
infrastructure.
0.2 Basic requirements for this standard
The basic requirements were developed during the preparation of IEC 61346-2 Ed. 1, and
accepted by vote by the national committees.
NOTE These basic requirements concern the development of the letter code classification system in this standard
and not its application. They are therefore not normative vis-à-vis the application of this standard.
(1) Letter codes shall be based on a classification scheme.
(2) A classification scheme is the set of definitions for the types of objects (for example, a
classification scheme for function types containing the definition of the different function
types of objects).
(3) A classification scheme shall allow for hierarchical classification of types of objects, i.e.
subclasses and superclasses.
(4) A letter code for a type of object shall be independent of the actual position of the
instances of that type of object in a system.
(5) Distinct classes shall be defined on each level of the classification scheme.
(6) The definitions of the classes of a particular level within a classification scheme shall
have a common basis (for example, a classification scheme that, on one level, classifies
objects according to colour shall not contain classes that classify objects by shape). The
basis, however, may vary from one level to another.
(7) A letter code should indicate the type of object and not an aspect of this object.
(8) A classification scheme shall allow for expansion in order to take into account future
development and needs.
(9) A classification scheme shall be usable within all technical areas without favouring a
specific area.
(10) It shall be possible to use the letter codes consistently throughout all technical areas.
The same type of object should preferably have only one letter code independent of the
technical area where it is being used.
(11) It should be possible to indicate in a letter code from which technical area the object
originates, if this is wanted.
(12) A classification scheme should reflect the practical application of letter codes.
(13) Letter codes should not be mnemonic, as this cannot be implemented consistently
throughout a classification scheme and for different languages.
(14) Letter codes shall be formed using capital letters from the Latin alphabet, excluding I
and O due to possible confusion with the digits 1 (one) and 0 (zero).
---------------------- Page: 8 ----------------------
81346-2 © IEC:2009 – 7 –
(15) Different classification schemes shall be allowed and be applicable for the same type of
object.
(16) Objects may be classified for example according to function types, shapes, colours, or
material. This means that the same type of object may be assigned different letter
codes according to the different classification schemes.
(17) Objects that are directly constituents of another object using the same aspect shall be
assigned letter codes according to the same classification scheme as shown in Figure
1. See also Figure A.1.
IEC 1272/09
Objects 2, 3, and 4, which are direct constituents of object 1, shall be assigned letter codes from the same
classification scheme.
Objects 5 and 6, which are direct constituents of object 2, shall be assigned letter codes from the same
classification scheme.
Objects 7 and 8, which are direct constituents of object 4, shall be assigned letter codes from the same
classification scheme.
Objects 9, 10, 11, and 12, which are direct constituents of object 6, shall be assigned letter codes from the same
classification scheme.
Objecst 13, 14, 15, and 16, which are direct constituents of object 8, shall be assigned letter codes from the same
classification scheme.
Figure 1 – Constituent objects
(18) If products from different manufacturers are combined into a new product, the
constituents of this product may be assigned codes according to different classification
schemes.
---------------------- Page: 9 ----------------------
– 8 – 81346-2 © IEC:2009
INDUSTRIAL SYSTEMS, INSTALLATIONS
AND EQUIPMENT AND INDUSTRIAL PRODUCTS –
STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS –
Part 2: Classification of objects and codes for classes
1 Scope
This part of International Standard 81346, published jointly by IEC and ISO defines classes
and subclasses of objects based on a purpose- or task-related view of the objects, together
with their associated letter codes to be used in reference designations.
The classification is applicable for objects in all technical areas, e.g. electrical, mechanical
and civil engineering as well as all branches of industry, e.g. energy, chemical industry,
building technology, shipbuilding and marine technology, and can be used by all technical
disciplines in any design process.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 81346-1, Industrial systems, installations and equipment and industrial products –
Structuring principles and reference designations – Part 1: Basic rules
ISO 14617-6:2002 Graphical symbols for diagrams – Part 6: Measurement and control
functions
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 81346-1 apply.
4 Classification principles
4.1 General
The principle of classification of objects is based on viewing each object as a means for
performing an activity often with input and output (see Figure 2). In this respect, the internal
structure of an object is not important.
IEC 1273/09
Figure 2 – The basic concept
---------------------- Page: 10 ----------------------
81346-2 © IEC:2009 – 9 –
Annex A shows the generic process model used for the establishment of the classification
scheme based on intended purpose or task as shown in Table 1.
An alternative classification according to purpose or task in the special case of an object
regarded as part of an infrastructure is presented in Table 3.
Each class defined in Table 1 is in this standard associated with a set of predefined
subclasses allowing a more detailed characterization of a component, if required. The
definitions of subclasses of objects are presented in Table 2 together with their associated
letter codes of class and subclass.
NOTE 1 Subclasses do not define a new level in a structure, i.e. they do not describe a subdivision of the object.
Class and subclass refer to the same object.
NOTE 2 The use of subclasses for the coding of technical attributes should be avoided, as this is a separate kind
of information presented in the documentation, for example in a technical specification or in a parts list.
4.2 Assigning objects to classes
For the assignment of objects (i.e. components belonging to the system under consideration)
to classes, the following rules apply:
Rule 1 For the classification of objects according to their intended purpose or task, main
classes and letter codes in accordance with Table 1 or Table 3 shall be applied.
Rule 2 For assigning an object to a class according to Table 1 or Table 3, the object shall
be viewed with respect to its intended purpose or task, as a component in the
system under consideration, without considering the means for implementation
(e.g. the kind of product).
EXAMPLE The desired purpose of an object is “heating”. A possible component required to fulfil this
is a “heater”. According to Table 1, this object is clearly related to class E. It is not of importance, or
simply not known at an early stage of a design process, how the required purpose is realized. This
needed component may be satisfied by using a gas or oil burner or an electric heater (which all may
be products delivered by others). In the case of an electric heater, the heat may be produced by a
product called electric resistor. This product may, in other cases, be classified by its purpose
“restricting a flow” according to class R if that describes it use as a component in those contexts.
It is the component that is classified – not the product used for implementation!
Rule 3 For objects with more than one intended purpose or task, the object shall be
classified according to the intended purpose or task considered to be the main
one.
Table 1 shall only be applied for objects
Rule 4 The class with letter code A according to
with no explicit main purpose or task.
EXAMPLE A flow rate recorder stores measured values for later use but, at the same time, delivers
an output in visible form. If storing is regarded as the main purpose, the object is related to class C
of Table 1. If the indication of measured values is regarded as the main purpose, the object is
related to class P. If the two purposes are considered equally valid, the object is related to class A.
Figure 3 illustrates the principle of assigning classes to objects in the case of a measuring
circuit. The left-hand side illustrates how the requirements are turned into objects with input
and output. On the right-hand side, the used components are shown.
---------------------- Page: 11 ----------------------
– 10 – 81346-2 © IEC:2009
Required process activity
Required system object
Different possible realizations
a) Direct measuring and indication
b) Measuring and indication circuit consisting of discrete components
c) One device integrating discrete components
Indicating device
Class P
Transducer
Instrument
Sensor
class T
class P
class B
Indicated,
measured
property
Classification of internal
components is of interest only
Process flow if they are accessible.
d) One device integrating discrete components and for combined purposes; for measuring (primary purpose),
and for indicating (secondary purpose)
IEC 1274/09
NOTE The classes are taken from Table 1.
Figure 3 – Classification of objects in a measuring circuit
---------------------- Page: 12 ----------------------
81346-2 © IEC:2009 – 11 –
5 Classes of objects
5.1 Classes of objects according to intended purpose or task
Table 1 constitutes the main classification method applicable for any object from any field of
technology.
The most important element in the table is the description of the intended purpose or task of
an object to which it is to be referred when searching for an appropriate class for an object.
---------------------- Page: 13 ----------------------
– 12 – 81346-2 © IEC:2009
Table 1 – Classes of objects according to their intended purpose or task
(Codes A to D)
Code Intended purpose or Examples of terms Examples of typical Examples of typical
task of object describing the mechanical/fluid electrical components
intended purpose or components
task of objects
A Two or more purposes or
tasks
NOTE This class is only
for objects for which no
main intended purpose
or task can be identified.
B Converting an input Detecting Orifice plate (for Buchholz relay
variable (physical Measuring (picking-up of measuring) Current transformer
property, condition or values) Sensor Flame detector
event) into a signal for Monitoring Measuring relay
further processing Sensing Measuring shunt
Weighing (picking-up of (resistance)
values) Microphone
Movement detector
Overload relay
Photocell
Position switch
Proximity sensor
Proximity switch
Smoke sensor
Tachometer
Temperature sensor
Video camera
Voltage transformer
C Storing of energy, Recording Barrel Buffer battery
information or material Storing Buffer Capacitor
Cistern Event recorder (mainly for
Container storing purposes)
Hot water accumulator Hard disk
Paper reel stand Magnetic tape recorder
Tank (mainly for storing
pu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.