ISO/IEC ISP 10609-32:1995

Information technology — International Standardized Profiles TB, TC, TD and TE — Connection-mode Transport Service over connection-mode Network Service — Part 32: Definition of profile TC4111

Defines the Profile TC4111. The TC4111 profile is in the TC group which supports Transport protocol classes 0 and 2.

Technologies de l'information — Profils normalisés internationaux TB, TC, TD et TE — Service de transport en mode connexion sur service de réseau en mode connexion — Partie 32: Définition du profil TC4111

General Information

• Status: Withdrawn
• Publication Date: 26-Dec-1995
• Withdrawal Date: 26-Dec-1995
• ICS: 35.100.05 - Multilayer applications
• Technical Committee: ISO/IEC JTC 1 - Information technology
• Drafting Committee: ISO/IEC JTC 1 - Information technology
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 19-May-2009

Relations

• Consolidated By: ISO 13705:2006 - Petroleum, petrochemical and natural gas industries — Fired heaters for general refinery service
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARDIZED
ISP
PROFILE
10609-32
First edition
1995-12-15
-
Information technology - International
Standardized Profiles TB, TC, TD and
TE - Connection-mode Transport Service
over connection-mode Network Service -
Part 32:
Definition of Profile TC41 11
Technologies de I ’informa tion - Profils normalk& interna tionaux TB, TC,
TD et TE - Service de transport en mode connexion sur Service de
r&eau en mode connexion -
Partie 32: Definition du Profil TC4 7 17
Reference number
ISO/IEC ISP 10609-32:1995(E)

---------------------- Page: 1 ----------------------
ISO/IEC ISP 10609-32: 1995(E)
Page
Csntents
. .
Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .e.s
Vl
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . “.~. “.~*.
1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .~.~.~. “.~. “~. ‘.*.~ ‘~ ‘~~<<<.L.~*. ‘C. ‘*.
1 Scope
1
1.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .~.~~.~.~~.~.*.~.*.~. “~.~*a.eCL<.”.~~ “c. “.
1
1.2 Position within the taxonomy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .~.~.~.~.~.~~~.~.~.
. . . . . . . . . 1
1.3 Scenario . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .~.~.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .~.~.~.~.~.~. ‘.~. 2
2 Normative references
3
3 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .~.~.~~.~~~~.~~. “~. ”.~.~. ‘”~.~~~ ‘~~~~.~.~~~~.~~ ‘~.~~ ‘~
3
4 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
5 Profile TC41 11 .
............................................................................................................ 3
5.1 Static conformance requirements
4
5.2 Dynamit conformance requirements .
.............................................................................................................. 5
Annex A: ISPICS requirements list (IPRL)
5
A. 1 General Options of the Profile .
5
A.2 Standards selected and combined in the Profile .
5
A.3 Constraints on base Standards .
...................................................................................................................... 6
Annex B: Guidance for implernentors
6
B. 1 Network layer .
6
B.2 Data Link Layer .
0 ISO/IEC 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
means, electronie or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
ISO/IEC Copyright Office l Case postale 56 l CH- 12 11 Geneve l Switzerland
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
ISO/IEC ISP 10609-32: 1995(E)
0 ISOIIEC
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
form the specialized System for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards through technical committees established by the respective
organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in
fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO
and IEC, also take part in the work.
In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
In addition to developing International Standards, ISO/IEC JTC 1 has created a Special Group on Functional
Standardization for the processing of International Standardized Profiles.
An International Standardized Profile is an internationally agreed, harmonized document which
identifies a Standard
or group of Standards, together with Options and Parameters, necessary to accomplish a function
or set of functions.
Draft International Standardized Profiles are circulated to national bodies for voting. Publication as an International
Standardized Profile requires approval by at least 75% of the national bodies casting a vote.
International Standardized Profile ISOLIEC ISP 10609-32 was prepared with the collaboration of
- Asia-Oceania Workshop (AOW);
- European Workshop for Open Systems (EWOS);
- Open Systems Environment Implernentors’ Workshop (OIW).
ISO/IEC ISP 10609 consists of the following parts, under the general title Information technology - International
Standardized Profiles TB, TC, TD and TE - Connection-mode Transport Service over connection-mode Network
Service:
Part 1: Subnetwork-type independent requirements for Group TB
Part 2: Subnetwork-type independent requirements for Group TC
Part 3: Subnetwork-type independent requirements for Group TD
Part 4: Subnetwork-type independent requirements for Group TE
Part 5: Definition of proBles TBI 11 l/TBl121
Part 6: Definition of profiles TU 11 l/TClI21
Part 7: DeJinition of profiles TDlll UTDl121
Part 8: Definition of profiles TE1 11 UTE1 12 1
Part 9: Subnetwork-type dependent requirements for Network Layer, Data Link Layer and Physical
Layer concerning permanent access to a packet switched data network using virtual calls
. . .
111

---------------------- Page: 3 ----------------------
0 ISO/IEC
ISO/IEC ISP 10609-32: 1995(E)
Part IO: LAN subnetwork-dependent, media-independent requirements
Part 11: CSMAKD LAN subnetwork-dependent, media-dependent requirements
Part 12: Definition of Profile TC.51, Provision of the OSI connection-mode Transport Service using
the OSI connection-mode Network Service in an End System attached to a CSMA/cD LAN
Part 14: Definition of Profile TC53, Provision of the OSI connection-mode Transport Service using
the OSI connection-mode Network Service in an End System attached to a Token Ring UN
Part 15: Definition of Profile TC.54, Provision of the OSI connection-mode Transport Service using
the OSI connection-mode Network Service in an End System attached to an FDDI LAN
Part 20: Overview of the generalized multi-part ISP structure for TC and TD Group pro$les for OSI
usage of ISDN
Part 21: Subnetwork-type dependent requirements for Network Layer and Data Link Layer for ISDN
B-channel X.2.5 DTE to DTE Operation
Part 22: Subnetwork-type dependent requirements for Network Layer and Data Link Layer for ISDN
B-channel X.25 DTE to DCE Operation
Part 23: Subnetwork-type dependent requirements for Network Layer and Data Link Layer for Data
Transfer concerning a packet switched mode Integrated Services Digital Network using virtual calls:
B-channel access case
Part 24: Subnetwork-type dependent requirements for Network Layer and Data Link Layer for Data
Transfer concerning a packet switched mode Integrated Services Digital Network using virtual calls:
D-channel access case
Part 25: Subnetwork-type dependent requirements for Q.931 circuit-switched Operation
Part 26: Subnetwork-type dependent requirements for Network Layer for Cal1 Control procedures
conceming the outgoing cal1 of a packet switched mode Integrated Services Digital Network in case
B using virtual calls
Part 27: Subnetwork-type dependent requirements for Network Layer for Cal1 Control procedures
conceming the incoming cal1 of a packet switched mode Integrated Services Digital Network in case
B using virtual calls
Part 28: Subnetwork-type dependent requirements for Data Link Layer for end Systems attached to
an ISDN subnetwork
Part 30: Definition of Profile TC1 131
Part 31: Definition of Profile TC1 23 I
Part 32: Definition of Profile TC41 11
Part 33: Definition of Profile TC421 1
Part 34: Definition of proBle TC431 11
1v

---------------------- Page: 4 ----------------------
0 ISO/IEC
ISO/IEC ISP 10609-32: 1995(E)
Part 35: Definition of Profile TC431 12
Part 36: Definition of Profile TC4321 1
Part 37: Definition of Profile TC43212
Part 38: Definition of proBle TC4331
Part 40: Definition of Profile TDll31
Part 41: Definition of Profile TDl231
Part 42: Definition of Profile TD4111
Part 43: Definition of Profile TD4211
Part 44: Definition of Profile TD43111
Part 45: Definition of Profile TD43112
Part 46: Definition of Profile TD43211
Part 47: Definition of Profile TD43212
Part 48: Definition of Profile TD4331
Annex A forms an integral part of this part of ISO/IEC ISP 10609. Annex B is for information only.

---------------------- Page: 5 ----------------------
ISO/IEC ISP 10609=32:1995(E) 0 ISO/IEC
Introduction
This International Standardized Profile (ISP) is defined in accordance with the principles specified by ISO/IEC
Technical Report 10000, “Information technology - Framework and taxonomy of Interna
...