iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 300 494-3 V1.4.1:2003

(Main)

Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) - Fixed radio Termination (FT)

Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) - Fixed radio Termination (FT)

Update historic references and receiver interference performance ( - 48 dBm) clause 4.4.5.

Digitalne izboljšane brezvrvične telekomunikacije (DECT) – Profil generičnega dostopa (GAP) – Profil preskušalne specifikacije (PTS) – 3. del: Od profila odvisna preskušalna specifikacija (PSTS) – Fiksna radijska zaključitev (FT)

General Information

Status
Published
Publication Date
30-Nov-2003
ICS
33.070.30 - Digital Enhanced Cordless Telecommunications (DECT)
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2003
Due Date
01-Dec-2003
Completion Date
01-Dec-2003
Ref Project
ETSI EN 300 494-3 V1.4.1 (2002-04) - Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) - Fixed radio Termination (FT)

Buy Standard

EN 300 494-3 V1.4.1:2003EN 300 494-3 V1.4.1:2003
PreviousNext
Standard
EN 300 494-3 V1.4.1:2003
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.7Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) - Fixed radio Termination (FT)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 300 494-3 Version 1.4.1SIST EN 300 494-3 V1.4.1:2003en01-december-2003SIST EN 300 494-3 V1.4.1:2003SLOVENSKI
STANDARD



SIST EN 300 494-3 V1.4.1:2003



ETSIEN300494-3V1.4.1(2002-04)EuropeanStandard(Telecommunicationsseries)DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP);ProfileTestSpecification(PTS);Part3:ProfileSpecificTestSpecification(PSTS)-FixedradioTermination(FT)SIST EN 300 494-3 V1.4.1:2003



ETSIETSIEN300494-3V1.4.1(2002-04)2ReferenceREN/DECT-040209-3KeywordsDECT,GAP,PTS,testingETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://portal.etsi.org/tb/status/status.aspIfyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2002.Allrightsreserved.DECTTM,PLUGTESTSTMandUMTSTMareTradeMarksofETSIregisteredforthebenefitofitsMembers.TIPHONTMandtheTIPHONlogoareTradeMarkscurrentlybeingregisteredbyETSIforthebenefitofitsMembers.3GPPTMisaTradeMarkofETSIregisteredforthebenefitofitsMembersandofthe3GPPOrganizationalPartners.SIST EN 300 494-3 V1.4.1:2003



ETSIETSIEN300494-3V1.4.1(2002-04)3ContentsIntellectualPropertyRights.6Foreword.61Scope.72References.73Definitionsandabbreviations.93.1Definitions.93.2Abbreviations.94Relevanttestcaseslist.104.1Network(NWK)layer.104.1.1TestSuiteStructure(TSS).104.1.2Testcaseindex.114.2DataLinkControl(DLC)layer.144.2.1Testsuitestructure.144.2.2Testcaseindex.154.3MediumAccessControl(MAC)layer.164.3.1TestSuiteStructure.164.3.2Testcaseindex.174.4PHYsical(PHY)layer.184.4.1Manufacturerdeclarations.184.4.2NormalTransmittedPower(NTP).184.4.2.1VerdictcriteriaforIUTswithanintegralantenna.184.4.2.2VerdictcriteriaforIUTswithexternalantennaconnection(s).184.4.3RFPradioreceiversensitivity.184.4.4Void.184.4.5Void.185Additionaltestcaseslist.195.1Testpurposes.195.1.1NWKlayer.195.1.2DLClayer.195.1.3MAClayer.195.1.4PHYlayer.195.2Testcases.195.2.1NWKlayer.195.2.2DLClayer.195.2.3MAClayer.195.2.4PHYlayer.205.2.4.1Receiversensitivitytoleranceoftransmitterdeviationvariations.205.2.4.1.1Definition.205.2.4.1.2Testenvironment.205.2.4.1.3Methodofmeasurement.205.2.4.1.4Verdictcriteria.205.2.4.2TransmissionofZ-field.205.2.4.2.1Definition.215.2.4.2.2Testenvironment.215.2.4.2.3Methodofmeasurement.215.2.4.2.4Verdictcriteria.21AnnexA(normative):ProfileImplementationeXtraInformationforTesting(PIXIT)proforma.22A.1General.22A.2ProfileIXITRequirementsList(XRL).22A.2.1NWKlayerprotocol.22SIST EN 300 494-3 V1.4.1:2003



ETSIETSIEN300494-3V1.4.1(2002-04)4A.2.2DLClayerprotocol.22A.2.3MAClayerprotocol.22A.2.4PHYlayerprotocol.22A.3ProfilespecificIXIT.22A.3.1NWKlayer.22A.3.2DLClayer.22A.3.3MAClayer.23A.3.4PHYlayer.23A.3.5Configurationconstraints.23A.4Declarationoffeaturessupported.23A.4.1Networklayer.23AnnexB(normative):ProfileConformanceTestReport(PCTR)proforma.25B.1Identificationsummary.25B.1.1ProfileCTR.25B.1.2ImplementationUnderTest(IUT).26B.1.3Testingenvironment.26B.1.4Limitsandreservations.26B.1.5Comments.27B.2IUTconformancestatus.27B.3Staticconformancesummary.27B.4Dynamicconformancesummary.27B.5Staticconformancereviewreport.28B.6Testcampaignreport.28B.6.1NWKlayer.29B.6.2DLClayer.31B.6.3MAClayer.31B.6.4PHYlayer.32B.7Observations.32AnnexC(normative):SystemConformanceTestReport(SCTR)proforma.33C.1Identificationsummary.33C.1.1SystemConformanceTestReport(SCTR).33C.1.2Testlaboratory.33C.1.3Client.34C.1.4SystemUnderTest(SUT).34C.1.5Profile.34C.1.6Natureofconformancetesting.35C.1.7Limitsandreservations.35C.1.8Recordofagreement.35C.1.9Comments.35C.2Systemreportsummary.36C.2.1ProfiletestingsummaryforGAPNWKlayerFT.36C.2.2ProfiletestingsummaryforGAPDLClayerFT.37C.2.3ProfiletestingsummaryforGAPMAClayerFT.38C.2.4ProfiletestingsummaryforGAPPHYlayerFT.39AnnexD(normative):SystemConformanceStatement(SCS)proforma.40D.1Identificationsummary.40D.1.1SCSidentification.40D.1.2IUTidentification.40D.1.3Clientidentification.41D.1.4Supplieridentification.41D.1.5Manufactureridentification.42D.1.6Protocolsidentification.42SIST EN 300 494-3 V1.4.1:2003



ETSIETSIEN300494-3V1.4.1(2002-04)5D.1.7Profileidentification.42D.2Miscellaneoussysteminformation.43D.2.1Configuration.43D.2.2Otherinformation.43History.44SIST EN 300 494-3 V1.4.1:2003



ETSIETSIEN300494-3V1.4.1(2002-04)6IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://webapp.etsi.org/IPR/home.asp).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSIProjectDigitalEnhancedCordlessTelecommunications(DECT).Thepresentdocumentispart3ofamulti-partdeliverablecoveringtheGenericAccessProfile(GAP),asidentifiedbelow:Part1:"Summary";Part2:"ProfileSpecificTestSpecification(PSTS)-PortableradioTermination(PT)";Part3:"ProfileSpecificTestSpecification(PSTS)-FixedradioTermination(FT)".NationaltranspositiondatesDateofadoptionofthisEN:12April2002DateoflatestannouncementofthisEN(doa):31July2002DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31January2003DateofwithdrawalofanyconflictingNationalStandard(dow):31January2003SIST EN 300 494-3 V1.4.1:2003



ETSIETSIEN300494-3V1.4.1(2002-04)71ScopeThepresentdocumentcontainsthetestspecificationforDigitalEnhancedCordlessTelecommunications(DECT)GenericAccessProfile(GAP)FixedPart(FP)applications.ThemainobjectiveoftheGAPtestspecificationistoprovideapprovaltestsgivingahighprobabilityofairinterfaceinter-operabilitybetweendifferentmanufacturer'sequipmentindifferentenvironments(i.e.public,businessandresidential).TheISOstandardforthemethodologyofconformancetestingISO/IEC9646parts1to7[9]to[15]isusedasthebasisforthetestmethodology,andasthebasisforthetestcasespecification.ThisisconsideredtobeunsuitableforPhysicallayertesting,andthereforeatextdescriptionisused.ThetestcaseslistedinthepresentdocumenthavebeenderivedfromtheDECTCommonInterface(CI)TestCaseLibrary(TCL)[18]to[26].InadditionasfarasthePhysicallayerisconcernedEN300176parts1[16]and2[30]apply.AdditionalGAPspecifictestcasesareincludedwhererequired.TheProfileIXITisbasedontheDECTCIPIXITsspecifiedinEN300497[18]to[26].2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublicationand/oreditionnumberorversionnumber)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.[1]ETSIEN300175-1:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part1:Overview".[2]ETSIEN300175-2:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part2:PhysicalLayer(PHL)".[3]ETSIEN300175-3:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part3:MediumAccessControl(MAC)layer".[4]ETSIEN300175-4:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part4:DataLinkControl(DLC)layer".[5]ETSIEN300175-5:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part5:Network(NWK)layer".[6]ETSIEN300175-6:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part6:Identitiesandaddressing".[7]ETSIEN300175-7:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part7:Securityfeatures".[8]ETSIEN300444:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP)".[9]ISO/IEC9646-1:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part1:Generalconcepts".[10]ISO/IEC9646-2:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part2:Abstracttestsuitespecification".SIST EN 300 494-3 V1.4.1:2003



ETSIETSIEN300494-3V1.4.1(2002-04)8[11]ISO/IEC9646-3:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part3:TheTreeandTabularCombinedNotation(TTCN)".[12]ISO/IEC9646-4:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part4:Testrealization".[13]ISO/IEC9646-5:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part5:Requirementsontestlaboratoriesandclientsfortheconformanceassessmentprocess".[14]ISO/IEC9646-6:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part6:Protocolprofiletestspecification".[15]ISO/IEC9646-7:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part7:ImplementationConformanceStatements".[16]ETSIEN300176-1:"DigitalEnhancedCordlessTelecommunications(DECT);Approvaltestspecification;Part1:Radio".[17]ETSIEN300476(allparts):"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);ProtocolImplementationConformanceStatement(PICS)proforma".[18]ETSIEN300497-1:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part1:TestSuiteStructure(TSS)andTestPurposes(TP)forMediumAccessControl(MAC)layer".[19]ETSIEN300497-2:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part2:AbstractTestSuite(ATS)forMediumAccessControl(MAC)layer-PortableradioTermination(PT)".[20]ETSIEN300497-3:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part3:AbstractTestSuite(ATS)forMediumAccessControl(MAC)layer-FixedradioTermination(FT)".[21]ETSIEN300497-4:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part4:TestSuiteStructure(TSS)andTestPurposes(TP)-DataLinkControl(DLC)layer".[22]ETSIEN300497-5:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part5:AbstractTestSuite(ATS)-DataLinkControl(DLC)layer".[23]ETSIEN300497-6:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part6:TestSuiteStructure(TSS)andTestPurposes(TP)-Network(NWK)layer-PortableradioTermination(PT)".[24]ETSIEN300497-7:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part7:AbstractTestSuite(ATS)forNetwork(NWK)layer-PortableradioTermination(PT)".[25]ETSIEN300497-8:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part8:TestSuiteStructure(TSS)andTestPurposes(TP)-Network(NWK)layer-FixedradioTermination(FT)".[26]ETSIEN300497-9:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part9:AbstractTestSuite(ATS)forNetwork(NWK)layer-FixedradioTermination(FT)".[27]ETSIETS300474-1:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP);ProfilerequirementlistandprofilespecificImplementationConformanceStatement(ICS)proforma;Part1:PortableradioTermination(PT)".[28]ETSIETS300474-2:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP);ProfilerequirementlistandprofilespecificImplementationConformanceStatement(ICS)proforma;Part2:FixedradioTermination(FT)".SIST EN 300 494-3 V1.4.1:2003



ETSIETSIEN300494-3V1.4.1(2002-04)9[29]ETSIEN300494-1:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP);ProfileTestSpecification(PTS);Part1:Summary".[30]ETSIEN300176-2:"DigitalEnhancedCordlessTelecommunications(DECT);Approvaltestspecification;Part2:Speech".3Definitionsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thetermsanddefinitionsgiveninISO/IEC9646parts1to7[9]to[15],EN300175parts1to7[1]to[7]andEN300444[8]apply.3.2AbbreviationsForthepurposesofthepresentdocument,thefollowingabbreviationsapply:ACAuthenticationCodeATSAbstractTestSuiteBERBitErrorRateCCCallControlCICommonInterfaceDCKDerivedCipherKeyDLCDataLinkControlEUTEquipmentUnderTestFPFixedPartFTFixedradioTerminationGAPGenericAccessProfileICSImplementationConformanceStatementIPUIInternationalPortableUserIdentityIUTImplementationUnderTestIXITImplementationeXtraInformationforTestingLCELinkControlEntityLLMELowerLayerManagementEntityLTLowerTesterMACMediumAccessControlMMMobilityManagementNLFNewLinkFlagNTPNormalTransmittedPowerNWKNetWorKPARKPortableAccessRightsKeyPHYPHYsicalPICSProtocolImplementationConformanceStatementPIXITProtocolImplementationeXtraInformationforTestingPSTSProfileSpecificTestSpecificationPTPortableradioTerminationPTSProfileTestSpecificationRFPRadioFixedPartSARISecondaryAccessRightsIdentitySUTSystemUnderTestTPUITemporaryPortableUserIdentityTSSTestSuiteStructureSIST EN 300 494-3 V1.4.1:2003



ETSIETSIEN300494-3V1.4.1(2002-04)104Relevanttestcaseslist4.1Network(NWK)layerThisclauseincludeslistsofthetestgroupsandabstracttestcasesrelevantforGAPProfileTestSpecification(PTS);NWKlayerFixedTermination(FT)derivedfromEN300497-9[26].NOTE:ReferenceswhennecessaryshallbemadebasedontheparticulartestcasenameuniquethroughalltestspecificationEN300497[18]to[26].4.1.1TestSuiteStructure(TSS)Table1TestSuiteStructureSuiteName:nwk_ftStandardsRef:EN300444[8];EN300497-9[26]ProfileICSRef:ETS300474-2[28]ProfileIXITRef:EN300494-3TestMethod:remoteComments:TestGroupReferenceTestGroupObjectiveFT/TocheckthebehaviouroftheNWKlayeroftheFT(IUT)FT/CC/TochecktheIUTCC-statemachinebehaviourFT/CC/IT/TocheckthattheIUTCC-statemachineprovidessufficientconformanceforpossibleinterconnectionwithouttryingtoperformthoroughtestingFT/CC/CA/LimitedtestingthattheobservablecapabilitiesoftheCCentityoftheIUTareinaccordancewiththestaticconformancerequirementsandtheadditionalcapabilitiesclaimedinthePROFILEICS/PROFILEIXITFT/CC/BV/TotesttheCCentityoftheIUTinresponsetosyntacticallyandcontextualcorrectbehaviourofthetestsystemFT/CC/BV/OC/TochecktheIUT'sbehaviourstosetupanoutgoingcallFT/CC/BV/IC/TochecktheIUT'sbehaviourstosetupanincomingcallFT/CC/BV/CI/TochecktheIUT'sbehaviourininformationtransferproceduresFT/CC/BV/CR/TochecktheIUT'sbehaviourstoreleaseanoutgoing/incomingcallFT/CC/RSTochecktheIUT'sbehaviourduringcallrelatedsupplementaryserviceproceduresFT/CC/BO/TocheckthebehaviouroftheCCentityoftheIUTinresponsetothemessagesthataresyntacticallycorrectbutnotallowedtooccurinsomestatesoftheCCproceduresFT/CC/BI/TocheckthebehaviouroftheCCentityoftheIUTinresponsetoinvalidmessagesFT/CC/TI/ToverifythattheIUTCCtimersarewithcorrectvaluesandtheIUTisreactingproperlytotheexpiryofatimerFT/MM/TocheckthebehaviouroftheMobilityManagemententityoftheIUTFT/MM/IT/TocheckthattheMMentityoftheIUTprovidessufficientconformanceforpossibleinterconnectionwithouttryingtoperformthoroughtestingFT/MM/CA/LimitedtestingthattheobservablecapabilitiesoftheMMentityoftheIUTareinaccordancewiththestaticconformancerequirementsandtheadditionalcapabilitiesclaimedinthePROFILEICS/PROFILEIXITFT/MM/BV/TotesttheMMentityoftheIUTinresponsetosyntacticallyandcontextualcorrectbehaviourofthetestsystemFT/MM/BV/ID/TochecktheIUT'sbehaviourconc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 300 175-7 V1.9.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security features
ETSI EN 300 175-7 V1.9.1 (2005-09)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document specifies the security architecture, the types of cryptographic algorithms required, the way in which they are to be used, and the requirements for integrating the security features provided by the architecture into the DECT CI. It also describes how the features can be managed and how they relate to certain DECT fixed systems and local network configurations.
The security architecture is defined in terms of the security services which are to be supported at the CI, the mechanisms which are to be used to provide the services, and the cryptographic parameters, keys and processes which are associated with these mechanisms.
The security processes specified in the present document are each based on one of two cryptographic algorithms:
• an authentication algorithm; and
• a key stream generator.
The architecture is, however, algorithm independent, and either the DECT standard algorithms, or appropriate proprietary algorithms, or indeed a combination of both can, in principle, be employed. The use of the employed algorithm is specified in the present document. Integration of the security features is specified in terms of the protocol elements and processes required at the Network (NWK) and Medium Access Control (MAC) layers of the CI. The relationship between the security features and various network elements is described in terms of where the security processes and management functions may be provided. The present document does not address implementation issues. For instance, no attempt is made to specify whether the DSAA should be implemented in the PP at manufacture, or whether the DSAA or a proprietary authentication algorithm should be implemented in a detachable module. Similarly, the present document does not specify whether the DSC
should be implemented in hardware in all PPs at manufacture, or whether special PPs should be manufactured with the DSC or proprietary ciphers built into them. The security architecture supports all these options, although the use of proprietary algorithms may limit roaming and the concurrent use of PPs in different environments.

  • Standard
    101 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-5 V1.9.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer
ETSI EN 300 175-5 V1.9.1 (2005-09)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document specifies the Network (NWK) layer. The NWK layer is part 5 of the EN 300 175 and layer 3 of the DECT protocol stack.The present document only specifies the C-plane (control plane) of the DECT NWK layer. It contains no specification for the U-plane (user plane) because the U-plane is null for all services at the DECT NWK layer. The C-plane contains all of the internal signalling information, and the NWK layer protocols are grouped into the following families of procedures:
• Call Control (CC);
• Supplementary Services (SS);
• Connection Oriented Message Service (COMS);
• ConnectionLess Message Service (CLMS);
• Mobility Management (MM);
• Link Control Entity (LCE).
The present document uses the layered model principles and terminology as described in ITU-T Recommendation X.200 and ITU-T Recommendation X.210.

  • Standard
    309 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-5 V1.8.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer
ETSI EN 300 175-5 V1.8.1 (2004-11)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document specifies the Network (NWK) layer. The NWK layer is part 5 of the EN 300 175 and layer 3 of the DECT protocol stack.The present document only specifies the C-plane (control plane) of the DECT NWK layer. It contains no specification for the U-plane (user plane) because the U-plane is null for all services at the DECT NWK layer. The C-plane contains all of the internal signalling information, and the NWK layer protocols are grouped into the following families of procedures:
- Call Control (CC);
- Supplementary Services (SS);
- Connection Oriented Message Service (COMS);
- ConnectionLess Message Service (CLMS);
- Mobility Management (MM);
- Link Control Entity (LCE).
The present document uses the layered model principles and terminology as described in ITU-T Recommendation X.200 and ITU-T Recommendation X.210.

  • Standard
    310 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-1 V1.8.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 1: Overview
ETSI EN 300 175-1 V1.8.1 (2004-11)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document contains an abstract of the other parts of the DECT standard together with a general description of:
- the objectives of the present document;
- the DECT Common Interface;
- the protocol architecture of DECT.
The present document also provides an extensive vocabulary; in particular it contains the common definitions of all the technical terms used in different parts of the present document.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-2 V1.9.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 2: Physical Layer (PHL)
ETSI EN 300 175-2 V1.9.1 (2005-09)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document of the DECT CI specifies the physical channel arrangements. DECT physical channels are radio communication paths between two radio end points. A radio end point is either part of the fixed infrastructure, a privately owned Fixed Part (FP), typically a base station, or a Portable Part (PP), typically a handset. The assignment of one or more particular physical channels to a call is the task of higher layers.
The Physical Layer (PHL) interfaces with the Medium Access Control (MAC) layer, and with the Lower Layer Management Entity (LLME). On the other side of the PHL is the radio transmission medium which has to be shared extensively with other DECT users and a wide variety of other radio services. The tasks of the PHL can be grouped into five categories:
a) to modulate and demodulate radio carriers with a bit stream of a defined rate to create a radio frequency channel;
b) to acquire and maintain bit and slot synchronization between transmitters and receivers;
c) to transmit or receive a defined number of bits at a requested time and on a particular frequency;
d) to add and remove the synchronization field and the Z-field used for rear end collision detection;
e) to observe the radio environment to report signal strengths.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-3 V1.8.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer
ETSI EN 300 175-3 V1.8.1 (2004-11)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document of the DECT CI specifies the Medium Access Control (MAC) layer. The MAC layer is part 3 of the DECT Common Interface standard and layer 2a of the DECT protocol stack. It specifies three groups of MAC services:
- the broadcast message control service;
- the connectionless message control service; and
- the multi-bearer control service.
It also specifies the logical channels that are used by the above mentioned services, and how they are multiplexed and mapped into the Service Data Units (SDUs) that are exchanged with the Physical Layer (PHL).

  • Standard
    238 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-4 V1.8.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer
ETSI EN 300 175-4 V1.8.1 (2004-11)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).
The present document specifies the Data Link Control (DLC) layer. The DLC layer is part 4 of the DECT CI standard and layer 2b of the DECT protocol stack.
Two planes of operation are specified for this DLC (sub)layer. These planes are called the Control plane (C-plane) and the User plane (U-plane). The C-plane is mostly concerned with the DECT signalling aspects. It provides a reliable point-to-point service that uses a link access protocol to offer error protected transmission of Network (NWK) layer messages. The C-plane also provides a separate point-to-multipoint (broadcast) service (Lb). The U-plane is only concerned with end-to-end user information. This plane contains most of the application dependent procedures of DECT. Several alternative services (both circuit-mode and packet-mode) are defined as a family of independent entities. Each service provides one or more point-to-point U-plane data links, where the detailed characteristics of those links are determined by the particular needs of each service. The defined services cover a wide range of performance, from "unprotected with low delay" for speech applications to "highly protected with variable delay", for local area network applications. The present document uses the layered model principles and terminology as described in ITU-T Recommendation X.200 [12] and ITU-T Recommendation X.210 [13].

  • Standard
    152 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 757 V1.5.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Low Rate Messaging Service (LRMS) including Short Messaging Service (SMS)
ETSI EN 300 757 V1.5.1 (2004-09)

The Low Rate Messaging Service (LRMS), specified in the present document, provides a means for the slow, acknowledged or unacknowledged, transfer of multimedia message objects, including the Short Message Service (SMS). It provides both point-to-point and point-to-multipoint messaging. This service may be used for private and public roaming applications. The present document defines the requirements on the Physical (PHY), Medium Access Control (MAC), Data Link Control (DLC) and Network (NWK) layers of DECT. The present document also specifies management entity requirements and generic interworking conventions, which ensure the efficient use of the DECT spectrum. The present document further mandates how to implement a GSM like Short Message Service (SMS), Point-to-point (PTP), which uses a sub-set of the Low Rate Messaging Service (LRMS) mentioned before as a bearer service.
SMS-PTP includes the following two services:
- SMS Mobile Originated (SMS-MO), for transport of short messages from PT to FT;
- SMS Mobile Terminated (SMS-MT), for transport of short messages from FT to PT.
Definition of Point-To-Multipoint (PTM) SMS is outside the scope of the present document. In order to facilitate re-use of excising GSM Service Centres, the present document applies the upper GSM protocols up-to and including the GSM SMS-RP protocol. Therefore, interworking functions handling the encapsulation of GSM SMS-RP messages are specified. The SMS or LRMS applications are outside the scope of the present document. So is the network behind the FP. Any information provided concerning applications or the network behind the FP is provided for informative, descriptive reasons only.

  • Standard
    105 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-6 V1.8.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing
ETSI EN 300 175-6 V1.8.1 (2004-11)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document specifies the identities and addressing structure of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). There are four categories of identities to be used for identification and addressing in a general DECT environment.
These four categories are:
- Fixed Part (FP) identities;
- Portable Part (PP) identities;
- connection-related identities;
- equipment-related identities.
Fixed part identities and portable part identities are used for:
- access information from fixed parts to portable parts;
- access requests from portable parts;
- identification of portable parts;
- identification of fixed parts and radio fixed parts;
- paging;
- billing.
These identities support:
- different environments, such as residential, public or private;
- supply to manufacturers, installers, and operators of globally unique identity elements with a minimum of central administration;
- multiple access rights for the same portable;
- large freedom for manufacturers, installers, and operators to structure the fixed part identities, e.g. to facilitate provision of access rights to groups of DECT systems;
- roaming agreements between DECT networks run by the same or different owners/operators;
- indication of handover domains;
- indication of location areas, i.e. paging area;
- indication of subscription areas of a public service.
The present document also provides for length indicators and other messages that can override the default location and/or paging area and domain indications given by the structure of the identities.
Connection related identities are used to identify the protocol instances associated with a call and are used for peer-to-peer communication. Equipment related identities are used to identify a stolen PP and to derive a default identity coding for PP emergency call set-up.
Coding of identity information elements for higher layer messages is found in EN 300 175-5 [5], clause 7.7.
User authentication and ciphering need additional key information and is outside the scope of the present document, but is covered in other parts of EN 300 175 parts 1 to 8 [1] to [7], e.g. part 7.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-8 V1.9.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 8: Speech coding and transmission
ETSI EN 300 175-8 V1.9.1 (2005-09)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). This part of the DECT CI specifies the speech coding and transmission requirements. In order to ensure satisfactory interworking of different portable and fixed units, it is necessary to specify the transmission performance of the analogue information over the digital link. This requires not only use of a common speech algorithm, but also standardization of frequency responses, reference speech levels (or loudness) at the air interface and various other parameters. The present document applies to DECT equipment which includes all the necessary functions to provide real-time two-way speech conversation. A 3,1 kHz telephony teleservice conveyed over a DECT link (including Fixed Part (FP) and Portable Part (PP)) which is capable of being connected (directly or indirectly) to the public network access point should comply with the requirements in the present document. Tethered fixed point local loop applications are not required to comply with the requirements of the present document. The speech performance characteristics defined in the present document typically conform to TBR 008 (see bibliography), which specifies the overall performance between the handset acoustic interface and a 64 kbit/s A-law Pulse Code Modulated (PCM) digital network interface. The deviations from TBR 008 are mainly due to the consequences of non-PCM coding and transmission delay.
The additional features described in clause 8 are those which are not included in TBR 008, but which are likely to occur in a DECT system: analogue interface, loudspeaking and hand-free facilities, tandeming with a mobile radio network. Headsets are not covered by the present specifications. For the DECT systems which connect to the Public Switched Telephone Network (PSTN) via an analogue interface, the additional requirements, which are implemented in the FP, have as much as possible been aligned with TBR 038 (see bibliography).
A summary of the control and the use of the DECT echo control functions, to guide on need for options to manufacturers and installers, is found in annex A. Information concerning test methods can be found in EN 300 176 [3]. The test methods take into account that DECT is a digital system.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day