SIST EN 300 757 V1.5.1:2006
(Main)Digital Enhanced Cordless Telecommunications (DECT); Low Rate Messaging Service (LRMS) including Short Messaging Service (SMS)
Digital Enhanced Cordless Telecommunications (DECT); Low Rate Messaging Service (LRMS) including Short Messaging Service (SMS)
The Low Rate Messaging Service (LRMS), specified in the present document, provides a means for the slow, acknowledged or unacknowledged, transfer of multimedia message objects, including the Short Message Service (SMS). It provides both point-to-point and point-to-multipoint messaging. This service may be used for private and public roaming applications. The present document defines the requirements on the Physical (PHY), Medium Access Control (MAC), Data Link Control (DLC) and Network (NWK) layers of DECT. The present document also specifies management entity requirements and generic interworking conventions, which ensure the efficient use of the DECT spectrum. The present document further mandates how to implement a GSM like Short Message Service (SMS), Point-to-point (PTP), which uses a sub-set of the Low Rate Messaging Service (LRMS) mentioned before as a bearer service.
SMS-PTP includes the following two services:
- SMS Mobile Originated (SMS-MO), for transport of short messages from PT to FT;
- SMS Mobile Terminated (SMS-MT), for transport of short messages from FT to PT.
Definition of Point-To-Multipoint (PTM) SMS is outside the scope of the present document. In order to facilitate re-use of excising GSM Service Centres, the present document applies the upper GSM protocols up-to and including the GSM SMS-RP protocol. Therefore, interworking functions handling the encapsulation of GSM SMS-RP messages are specified. The SMS or LRMS applications are outside the scope of the present document. So is the network behind the FP. Any information provided concerning applications or the network behind the FP is provided for informative, descriptive reasons only.
Digitalne izboljšane brezvrvične telekomunikacije (DECT) – Nizkohitrostna storitev sporočanja (LRMS), vključno s storitvijo kratkih sporočil (SMS)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 300 757 V1.5.1:2006
01-marec-2006
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH '(&7 ±1L]NRKLWURVWQDVWRULWHY
VSRURþDQMD /506 YNOMXþQRVVWRULWYLMRNUDWNLKVSRURþLO 606
Digital Enhanced Cordless Telecommunications (DECT); Low Rate Messaging Service
(LRMS) including Short Messaging Service (SMS)
Ta slovenski standard je istoveten z: EN 300 757 Version 1.5.1
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
SIST EN 300 757 V1.5.1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 300 757 V1.5.1:2006
---------------------- Page: 2 ----------------------
SIST EN 300 757 V1.5.1:2006
ETSI EN 300 757 V1.5.1 (2004-09)
European Standard (Telecommunications series)
Digital Enhanced Cordless Telecommunications (DECT);
Low Rate Messaging Service (LRMS)
including Short Messaging Service (SMS)
---------------------- Page: 3 ----------------------
SIST EN 300 757 V1.5.1:2006
2 ETSI EN 300 757 V1.5.1 (2004-09)
Reference
REN/DECT-A0226
Keywords
data, DECT, profile, SMS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2004.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 300 757 V1.5.1:2006
3 ETSI EN 300 757 V1.5.1 (2004-09)
Contents
Intellectual Property Rights.8
Foreword.8
Introduction .8
1 Scope.9
2 References.10
3 Definitions, symbols and abbreviations .11
3.1 Definitions.11
3.2 Symbols.11
3.3 Abbreviations.11
4 Description of services.13
4.1 General.13
4.2 Low Rate Messaging Service (LRMS).13
4.2.1 Point-To-Point (PTP).13
4.2.2 Point-To-Multipoint (PTM).14
4.2.3 Short Message Service (SMS) .14
4.2.4 Service objectives.14
5 Low Rate Messaging Service (LRMS) .15
5.1 Reference configuration.15
5.2 Functional description.15
5.2.1 General.15
5.2.2 Exceptions for Point-To-Multipoint (PTM) service .16
5.2.2.1 MMS relations to outside networks (horizontal model).16
5.2.2.2 Architecture.16
5.2.2.3 MMS relations to the upper/lower layers (vertical model).16
5.2.2.4 Phases of the horizontal interactions.16
5.3 Physical layer requirements.16
5.4 MAC layer requirements .17
5.4.1 Requirements Point-To-Point (PTP) service.17
5.4.2 Requirements Point-To-Multipoint (PTM) service.17
5.4.3 Capabilities.18
5.4.3.1 Services.18
5.4.3.2 Protocol parameters.18
5.4.3.3 Messages.19
5.4.3.4 Message parameters.21
5.4.3.5 Functions implemented.23
5.4.3.6 Timer support.24
5.4.3.7 Procedure support.24
5.5 DLC layer requirements .25
5.5.1 Requirements C-plane Point-To-Point (PTP) service .25
5.5.2 Requirements C-plane Point-To-Multipoint (PTM) service .25
5.5.3 Requirements U-plane.26
5.5.4 Capabilities.26
5.5.4.1 C-plane services.26
5.5.4.2 C-plane procedures.26
5.5.4.2.1 Point-to-point acknowledged operation.26
5.5.4.2.2 Unacknowledged operation.28
5.5.4.2.3 Broadcast operation.28
5.5.4.2.4 Management procedures.28
5.5.4.3 C-plane PDU frame structure.29
5.5.4.4 C-plane messages.30
5.5.4.5 C-plane timers.34
5.5.4.6 C-plane protocol error handling .35
5.6 Network layer requirements .35
ETSI
---------------------- Page: 5 ----------------------
SIST EN 300 757 V1.5.1:2006
4 ETSI EN 300 757 V1.5.1 (2004-09)
5.6.1 Requirements Point-To-Point (PTP) service.35
5.6.2 Requirements Point-To-Multipoint (PTM) service.35
5.7 Management entity requirements .36
5.8 Generic interworking conventions .36
5.8.1 MMSP procedures.36
5.8.2 Multimedia Messaging Service - Service Access Point (MMS-SAP) .36
5.8.3 MMSP primitives Point-To Point (PTP) service .37
5.8.3.1 C-MMS primitives.37
5.8.3.2 M-MMS primitives.37
5.8.3.3 Parameters.37
5.8.4 MMSP primitives Point-To-Multipoint (PTM) Service .37
5.8.4.1 M-MMS primitives.37
5.8.4.2 Parameters.37
6 MMSP protocol definition.38
6.1 General.38
6.2 Functional description.38
6.2.1 General.38
6.2.2 MMS relations to outside networks (horizontal model).39
6.2.3 Architecture.40
6.2.3.1 General.40
6.2.3.2 MMSP call control part (C-MMS) .40
6.2.3.3 MMSP messaging part (M-MMS) .40
6.2.4 MMS relations to the upper/lower layers (vertical model) .41
6.2.4.1 General.41
6.2.4.2 MMS relation to the DECT upper layers .42
6.2.4.2.1 General.42
6.2.4.2.2 M-MMS.42
6.2.4.2.3 C-MMS.42
6.2.5 MMS relations to outside networks (vertical and horizontal model).42
6.2.5.1 General.42
6.2.5.2 Phases of the horizontal interactions.42
6.2.5.2.1 General.42
6.2.5.2.2 PP originated outgoing MMS call .43
6.2.5.2.3 Example of a typical PP initiated message .44
6.2.5.2.4 PP terminated incoming MMS call.44
6.3 MMSP protocol messages and procedures.45
6.3.1 C-MMS messages and procedures.45
6.3.2 M-MMS.45
6.3.2.1 Summary of the M-MMS messages.45
6.3.2.2 MMS SEND procedure.46
6.3.2.2.1 {MMS-SEND} message contents.46
6.3.2.2.2 {MMS-SEND-RPY} message contents.47
6.3.2.3 MMS SEND-REQ procedure.47
6.3.2.3.1 {MMS-SEND-REQ} message contents.48
6.3.2.3.2 {MMS-SEND-RPY} message contents.48
6.3.2.4 MMS RETRIEVE procedure .48
6.3.2.4.1 {MMS-RETRIEVE} message contents.49
6.3.2.4.2 {MMS-RETRIEVE-RPY} message contents.49
6.3.2.5 MMS RETRIEVE-HDR procedure .50
6.3.2.5.1 {MMS-RETRIEVE-HDR} message contents.50
6.3.2.5.2 {MMS-RETRIEVE-RPY} message contents.51
6.3.2.6 MMS-EXT-CMD procedure.51
6.3.2.6.1 {MMS-EXT-CMD} message contents.52
6.3.2.6.2 {MMS-EXT-CMD-RPY} message contents.52
6.3.2.7 MMS-STATUS procedures.52
6.3.2.7.1 {MMS-STATUS} message contents.53
6.3.2.7.2 {MMS-STATUS-RPY} message contents.53
6.3.2.8 MMS-ESC-CMD procedure.54
6.3.2.8.1 {MMS-ESC-CMD} message contents .54
6.3.2.8.2 {MMS-ESC-CMD-RPY} message contents.55
6.3.2.8.3 Generic interworking conventions for the {MMS-ESC-CMD} command and reply.55
ETSI
---------------------- Page: 6 ----------------------
SIST EN 300 757 V1.5.1:2006
5 ETSI EN 300 757 V1.5.1 (2004-09)
6.3.2.9 Procedures for the use of the MMS-message identifier .55
6.3.2.10 Multi-part message procedures.55
6.3.2.10.1 Multi-part send procedures.56
6.3.2.10.2 Multi-part retrieve procedures .56
6.3.2.11 Unsupported MMS command and IE compatibility procedures .56
6.3.2.11.1 Unsupported MMS commands procedure .56
6.3.2.11.2 Unsupported Information elements procedure .56
6.4 MMSP information elements .57
6.4.1 Summary of M-MMSP information elements .57
6.5 Parameters of M-MMSP service primitives .57
6.5.1 M_MMS_SEND- {req, ind}.58
6.5.2 M_MMS_SEND_REQ- {req, ind}.58
6.5.3 M_MMS_SEND_RPY- {req, ind} .59
6.5.4 M_MMS_RETRIEVE- {req, ind}.59
6.5.5 M_MMS_RETRIEVE_RPY- {req, ind} .60
6.5.6 M_MMS_EXT_CMD- {req, ind} .60
6.5.7 M_MMS_EXT_CMD_RPY- {req, ind}.61
6.5.8 M_MMS_STATUS- {req, ind} .61
6.5.9 M_MMS_STATUS_RPY- {req, ind} .62
6.5.10 M_MMS_ESC_CMD- {req, ind}.62
6.5.11 M_MMS_ESC_CMD_RPY- {req, ind}.63
7 Short Message Service (SMS).63
7.1 Feature and service definitions.63
7.1.1 Application features.63
7.1.2 MMS features.63
7.1.3 NWK features.63
7.1.4 DLC services.63
7.2 General requirements.64
7.2.1 Reference configurations.64
7.2.2 Protocol architecture.64
7.3 Interoperability requirements.65
7.3.1 Application features.65
7.3.2 MMS features.65
7.3.3 NWK features.66
7.3.4 DLC services.66
7.3.5 MAC services.66
7.3.6 PHL services.66
7.3.7 Application feature to procedure mapping.66
7.3.8 MMS feature to procedure mapping .67
7.3.9 NWK feature to procedure mapping.67
7.3.10 DLC feature to procedure mapping .67
7.4 Application procedures.68
7.4.1 Incoming message storage.68
7.4.2 Message encapsulation.68
7.4.3 General interworking requirements .68
7.4.3.1 Mapping of SMS message transfers onto CC- transactions .68
7.4.3.2 Authentication and ciphering .68
7.4.4 Message/primitive interworking.68
7.5 MMS procedures.68
7.5.1 Messaging send procedure.69
7.6 NWK layer procedure descriptions .70
7.6.1 Summary of outgoing call messages, normal case.70
7.6.2 Outgoing messaging call request .70
7.6.3 Outgoing messaging call connect .71
7.6.4 Summary of incoming call messages, normal case.71
7.6.5 Incoming messaging call request .71
7.6.6 Incoming messaging call connect .72
7.6.7 Message transfer.72
7.6.8 Terminal capability indication .73
7.7 DLC layer procedures .73
7.7.1 Class B link establishment.73
ETSI
---------------------- Page: 7 ----------------------
SIST EN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.