Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type

This clause of Part 1 is applicable, except as follows: Addition: This standard applies to sanders and polishers with the exception of all types of disc-type tools, which are covered by IEC 60745-2-3. Tools covered by this standard include but are not limited to belt sanders, reciprocating sanders or polishers, orbital sanders or polishers, and random orbit sanders or polishers.

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-4: Besondere Anforderungen für Schleifer und Polierer außer Tellerschleifern

Outils électroportatifs à moteur - Sécurité - Partie 2-4: Règles particulières pour les ponceuses et les lustreuses autres que du type à disque

Električna ročna orodja - Varnost - 2-4. del: Posebne zahteve za peskalnike in brusilnike, ki niso kolutni

Uporablja se ta klavzula prvega dela, razen kot sledi: Dodatek: Ta standard velja za peskalnike in brusilnike z izjemo vseh vrst kolutnih orodij, ki so zajeta v IEC 60745-2-3. Orodja, zajeta v tem standardu, vsebujejo, vendar niso omejena na tračne brusilnike, recipročne peskalnike in brusilnike, vibracijske peskalnike in brusilnike ter izsredne peskalnike in brusilnike.

General Information

Status
Withdrawn
Publication Date
16-Jan-2012
Withdrawal Date
19-Aug-2018
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Aug-2018
Due Date
24-Aug-2018
Completion Date
20-Aug-2018

Relations

Buy Standard

Amendment
EN 60745-2-4:2010/A11:2012
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60745-2-4:2010/A11:2012
01-marec-2012
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DSHVNDOQLNHLQ
EUXVLOQLNHNLQLVRNROXWQL
Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for
sanders and polishers other than disk type
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-4: Besondere
Anforderungen für Schleifer und Polierer außer Tellerschleifern
Outils électroportatifs à moteur - Sécurité - Partie 2-4: Règles particulières pour les
ponceuses et les lustreuses autres que du type à disque
Ta slovenski standard je istoveten z: EN 60745-2-4:2009/A11:2011
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 60745-2-4:2010/A11:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60745-2-4:2010/A11:2012

---------------------- Page: 2 ----------------------

SIST EN 60745-2-4:2010/A11:2012

EUROPEAN STANDARD
EN 60745-2-4/A11

NORME EUROPÉENNE
December 2011
EUROPÄISCHE NORM

ICS 25.080.50; 25.140.20; 25.140.30


English version


Hand-held motor-operated electric tools -
Safety -
Part 2-4: Particular requirements for sanders and polishers other than
disk type



Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-4: Règles particulières pour les Sicherheit -
ponceuses et les lustreuses autres que du Teil 2-4: Besondere Anforderungen für
type à disque Schleifer und Polierer außer
Tellerschleifern






This amendment A11 modifies the European Standard EN 60745-2-4:2009; it was approved by CENELEC on
2011-11-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.