EN 60745-2-4:2009/A11:2011

Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type

Publication editing allocated to [e-mail] * D138/042: TC rationale for not offering the project to IEC approved: Vibration measurement is not handled in IEC standards

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-4: Besondere Anforderungen für Schleifer und Polierer außer Tellerschleifern

Outils électroportatifs à moteur - Sécurité - Partie 2-4: Règles particulières pour les ponceuses et les lustreuses autres que du type à disque

Električna ročna orodja - Varnost - 2-4. del: Posebne zahteve za peskalnike in brusilnike, ki niso kolutni

Uporablja se ta klavzula prvega dela, razen kot sledi: Dodatek: Ta standard velja za peskalnike in brusilnike z izjemo vseh vrst kolutnih orodij, ki so zajeta v IEC 60745-2-3. Orodja, zajeta v tem standardu, vsebujejo, vendar niso omejena na tračne brusilnike, recipročne peskalnike in brusilnike, vibracijske peskalnike in brusilnike ter izsredne peskalnike in brusilnike.

General Information

• Status: Withdrawn
• Publication Date: 01-Dec-2011
• Withdrawal Date: 13-Nov-2014
• ICS: 25.080.50 - Grinding and polishing machines
• ICS: 25.140.20 - Electric tools
• ICS: 25.140.30 - Hand-operated tools
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 05-May-2018
• Completion Date: 05-May-2018
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Ref Project: SIST EN 60745-2-4:2010/A11:2012 - Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type

Relations

• Replaced By: EN 62841-2-4:2014 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4:2014, modified)
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2012
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DSHVNDOQLNHLQ
EUXVLOQLNHNLQLVRNROXWQL
Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for
sanders and polishers other than disk type
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-4: Besondere
Anforderungen für Schleifer und Polierer außer Tellerschleifern
Outils électroportatifs à moteur - Sécurité - Partie 2-4: Règles particulières pour les
ponceuses et les lustreuses autres que du type à disque
Ta slovenski standard je istoveten z: EN 60745-2-4:2009/A11:2011
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60745-2-4/A11
NORME EUROPÉENNE
December 2011
EUROPÄISCHE NORM
ICS 25.080.50; 25.140.20; 25.140.30

English version
Hand-held motor-operated electric tools -
Safety -
Part 2-4: Particular requirements for sanders and polishers other than
disk type
Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-4: Règles particulières pour les Sicherheit -
ponceuses et les lustreuses autres que du Teil 2-4: Besondere Anforderungen für
type à disque Schleifer und Polierer außer
Tellerschleifern
This amendment A11 modifies the European Standard EN 60745-2-4:2009; it was approved by CENELEC on
2011-11-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia
...