SIST EN ISO 583:2008
(Main)Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods (ISO 583:2007)
Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods (ISO 583:2007)
This International Standard specifies test methods for the det ermination of total belt thickness and the thickness of consti tutive elements of conveyor belts having a textile carcass. Th e constitutive elements include the covers, the carcass and in terlayers, i.e. the material between adjoining plies. This Int ernational Standard is not suitable or valid for light conveyo r belts as described in ISO 21183-1.
Textilfördergurte - Gesamtdicke und der Dicke der Einzelelemente - Prüfverfahren (ISO 583:2007)
Diese Internationale Norm legt ein Prüfverfahren zur Be¬stimmung der Gesamtdicke und der Dicke der Deckplatten von Textilfördergurten vor. Außerdem legt sie das Verfahren zur Bestimmung der Dicke der Karkasse und der Zwischenschichten fest.
Diese Internationale Norm ist nicht gültig oder anwendbar auf die in ISO 21183-1 beschriebenen leichten Fördergurte.
Courroies transporteuses a carcasse textile - Épaisseur totale de la courroie et épaisseur des éléments constitutifs - Méthodes d'essai (ISO 583:2007)
L'ISO 583:2007 spécifie des méthodes d'essai pour déterminer l'épaisseur totale de la courroie et l'épaisseur des éléments constitutifs des courroies transporteuses à carcasse textile. Les éléments constitutifs comprennent les revêtements, la carcasse et les entre-plis, c'est-à-dire le matériau entre les plis adjacents.
L'ISO 583:2007 n'est pas applicable ou valable pour les courroies transporteuses légères décrites dans l'ISO 21183-1.
Naprave za kontinuirni transport - Trakovi tračnih transporterjev s tekstilnim vložkom - Debelina celotnega traku in debelina posameznih sestavnih elementov traku - Merilne metode (ISO 583:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 583:2008
01-maj-2008
1DSUDYH]DNRQWLQXLUQLWUDQVSRUW7UDNRYLWUDþQLKWUDQVSRUWHUMHYVWHNVWLOQLP
YORåNRP'HEHOLQDFHORWQHJDWUDNXLQGHEHOLQDSRVDPH]QLKVHVWDYQLKHOHPHQWRY
WUDNX0HULOQHPHWRGH ,62
Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive
elements - Test methods (ISO 583:2007)
Textilfördergurte - Gesamtdicke und der Dicke der Einzelelemente - Prüfverfahren (ISO
583:2007)
Courroies transporteuses a carcasse textile - Épaisseur totale de la courroie et épaisseur
des éléments constitutifs - Méthodes d'essai (ISO 583:2007)
Ta slovenski standard je istoveten z: EN ISO 583:2007
ICS:
53.040.20
SIST EN ISO 583:2008 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 583
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2007
ICS 53.040.20 Supersedes EN ISO 583-1:1999
English Version
Conveyor belts with a textile carcass - Total belt thickness and
thickness of constitutive elements - Test methods (ISO
583:2007)
Courroies transporteuses à carcasse textile - Épaisseur Textilfördergurte - Gesamtdicke und der Dicke der
totale de la courroie et épaisseur des éléments constitutifs - Aufbauelemente - Prüfverfahren (ISO 583:2007)
Méthodes d'essai (ISO 583:2007)
This European Standard was approved by CEN on 23 May 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 583:2007: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 583:2007 (E)
Foreword
This document (EN ISO 583:2007) has been prepared by Technical Committee ISO/TC 41
"Pulleys and belts (including veebelts)" in collaboration with Technical Committee CEN/TC 188
"Conveyor belts", the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by December 2007, and conflicting national
standards shall be withdrawn at the latest by December 2007.
This document supersedes EN ISO 583-1:1999.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.
Endorsement notice
The text of ISO 583:2007 has been approved by CEN as EN ISO 583:2007 without any
modifications.
2
---------------------- Page: 3 ----------------------
INTERNATIONAL ISO
STANDARD 583
Third edition
2007-06-15
Conveyor belts with a textile carcass —
Total belt thickness and thickness of
constitutive elements — Test methods
Courroies transporteuses à carcasse textile — Épaisseur totale de la
courroie et épaisseur des éléments constitutifs — Méthodes d'essai
Reference number
ISO 583:2007(E)
©
ISO 2007
---------------------- Page: 4 ----------------------
ISO 583:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved
---------------------- Page: 5 ----------------------
ISO 583:2007(E)
Contents Page
Foreword. iv
1 Scope . 1
2 Determination of total belt thickness. 1
2.1 Apparatus . 1
2.2 Test piece . 1
2.3 Measurement points. 2
2.4 Procedure . 3
2.5 Expression of results . 3
3 Determination of thickness of covers. 3
3.1 General. 3
3.2 Method used when covers can be removed completely from carcass. 3
3.3 Method used when covers cannot be removed completely from carcass . 5
4 Determination of carcass thickness . 6
4.1 Carcass thickness without covers. 6
4.2 Carcass thickness with covers . 6
4.3 Expression of results . 6
5 Determination of thickness of interlayer. 6
5.1 General. 6
5.2 Method used when elastomeric material in interlayer can be removed completely from
adjacent fabric ply . 6
5.3 Method for use when elastomeric material in interlayer cannot be separated completely
from adjacent fabric ply . 7
6 Test report . 8
Bibliography . 9
© ISO 2007 – All rights reserved iii
---------------------- Page: 6 ----------------------
ISO 583:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 583 was prepared by Technical Committee ISO/TC 41, Pulleys and belts (including veebelts),
Subcommittee SC 3, Conveyer belts.
This third edition of ISO 583 cancels and replaces ISO 583-1:1999, of which it constitutes a technical revision.
It also incorporates the Technical Corrigendum, ISO 583-1:1999/Cor.1:2006.
iv © ISO 2007 – All rights reserved
---------------------- Page: 7 ----------------------
INTERNATIONAL STANDARD ISO 583:2007(E)
Conveyor belts with a textile carcass — Total belt thickness and
thickness of constitutive elements — Test methods
1 Scope
This International Standard specifies test methods for the determination of total belt thickness and the
thickness of constitutive elements of conveyor belts having a textile carcass. The constitutive elements include
the covers, the carcass and interlayers, i.e. the material between adjoining plies.
[1]
This International Standard is not suitable or valid for light conveyor belts as described in ISO 21183-1 .
2 Determination of total belt thickness
2.1 Apparatus
The apparatus shall consist of a flat, rigid baseplate, on which the test piece rests, and a gauge having a flat
circular foot, 10 mm in diameter, by means of which a specified pressure is applied to the test piece.
The gauge shall be capable of measuring to at least 0,1 mm.
The pressure ap
...
SLOVENSKI oSIST prEN ISO 583:2005
PREDSTANDARD
maj 2005
Naprave za kontinuirni transport - Trakovi tračnih transporterjev s tekstilnim
vložkom - Tolerance celotne debeline in debeline oblog - Neposredna merilna
metoda (ISO/DIS 583:2005)
Conveyor belts with a textile carcass - Tolerances on total thickness and thickness
of covers - Direct measurement method (ISO/DIS 583:2005)
ICS 53.040.20 Referenčna številka
oSIST prEN ISO 583:2005(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
prEN ISO 583
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2005
ICS Will supersede EN ISO 583-1:1999
English version
Conveyor belts with a textile carcass - Tolerances on total
thickness and thickness of covers - Direct measurement method
(ISO/DIS 583:2005)
Courroies transporteuses à carcasse textile - Epaisseur
totale de la courroie et épaisseur des éléments - Méthodes
d'essai (ISO/DIS 583:2005)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 188.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 583:2005: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
prEN ISO 583:2005 (E)
Foreword
This document (prEN ISO 583:2005) has been prepared by Technical Committee ISO/TC 41
"Pulleys and belts (including veebelts)" in collaboration with Technical Committee CEN/TC
188 "Conveyor belts", the secretariat of which is held by BSI.
This document is currently submitted to the parallel Enquiry.
This document will supersede EN ISO 583-1:1999.
Endorsement notice
The text of ISO 583:2005 has been approved by CEN as prEN ISO 583:2005 without any
modifications.
2
---------------------- Page: 3 ----------------------
DRAFT INTERNATIONAL STANDARD ISO/DIS 583
ISO/TC 41/SC 3 Secretariat: BSI
Voting begins on: Voting terminates on:
2005-02-03 2005-07-03
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Conveyor belts with a textile carcass — Total belt thickness and
thickness of elements — Test methods
Courroies transporteuses à carcasse textile — Épaisseur totale de la courroie et épaisseur des éléments —
Méthodes d'essai
[Revision of second edition (ISO 583:1990) and ISO 583-1:1999]
ICS 53.040.20
ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subject
of interest to European standardization. In accordance with the ISO-lead mode of collaboration as
defined in the Vienna Agreement, consultation on this ISO/DIS has the same effect for CEN
members as would a CEN enquiry on a draft European Standard. Should this draft be accepted, a
final draft, established on the basis of comments received, will be submitted to a parallel two-month FDIS
vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
© International Organization for Standardization, 2005
---------------------- Page: 4 ----------------------
ISO/DIS 583
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2005 – All rights reserved
---------------------- Page: 5 ----------------------
ISO/DIS 583
Contents Page
Foreword. v
1 Scope. 1
2 Normative references. 1
3 Determination of total belt thickness. 1
3.1 Apparatus. 1
3.2 Test piece. 1
3.3 Measurement points. 2
3.4 Procedure. 4
3.5 Expression of results . 4
4 Determination of thickness of covers. 4
4.1 Method for use when covers can be removed completely from the carcass . 4
4.2 Method for use when covers cannot be removed completely from the carcass. 5
5 Determination of thickness of carcass .6
6 Determination of thickness of interlayer .7
6.1 Method for use when the elastomeric material in the interlayer can be removed
completely from the adjacent fabric ply .7
6.2 Method for use when the elastomeric material in the interlayer cannot be
separated completely from the adjacent fabric ply. 8
7 Test report. 9
© ISO 2005 – All rights reserved iii
---------------------- Page: 6 ----------------------
ISO/DIS 583
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national
standards bodies (ISO member bodies). The work of preparing International Standards is normally
carried out through ISO technical committees. Each member body interested in a subject for which a
technical committee has been established has the right to be represented on that committee.
International organizations, governmental and non-governmental, in liaison with ISO, also take part in
the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives,
Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 583 was prepared by Technical Committee ISO/TC 41, Pulleys and belts (including veebelts),
Subcommittee SC 3, Conveyor belts.
This third edition of ISO 583 cancels and replaces ISO 583:1990 and ISO 583-1:1999 of which it
constitutes a technical revision.
iv © ISO 2005 – All rights reserved
---------------------- Page: 7 ----------------------
DRAFT INTERNATIONAL STANDARD ISO/DIS 583
Conveyor belts with a textile carcass — Total belt thickness
and thickness of elements — Test methods
1 Scope
This International Standard specifies methods of test for the total thickness and the thickness of
covers of conveyor belts having a textile carcass. It also specifies methods for the determination of
carcass thickness and interlayer thickness.
This International Standard is not suitable or valid for light conveyor belts as described in ISO 21183-
[1]
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.