SIST ETS 300 210-5:1998

Integrated Services Digital Network (ISDN); Freephone (FPH) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network

;

Digitalno omrežje z integriranimi storitvami (ISDN) - Dopolnilna storitev: brezplačni telefonski klic (FPH) - Protokol digitalne naročniške signalizacije št. 1 (DSS1) - 5. del: Zgradba preskušalnega niza in namen preskušanja (TSS&TP) - Specifikacija za omrežje

General Information

• Status: Published
• Publication Date: 30-Nov-1998
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: SPS - Signalling protocols and switching
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-1998
• Due Date: 01-Dec-1998
• Completion Date: 01-Dec-1998
• Ref Project: ETSI ETS 300 210-5 ed.1 (1997-05) - Integrated Services Digital Network (ISDN); Freephone (FPH) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 210-5:1998
01-december-1998
'LJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL,6'1'RSROQLOQDVWRULWHYEUH]SODþQL
WHOHIRQVNLNOLF)3+3URWRNROGLJLWDOQHQDURþQLãNHVLJQDOL]DFLMHãW'66
GHO=JUDGEDSUHVNXãDOQHJDQL]DLQQDPHQSUHVNXãDQMD766 736SHFLILNDFLMD
]DRPUHåMH
Integrated Services Digital Network (ISDN); Freephone (FPH) supplementary service;
Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test Suite
Structure and Test Purposes (TSS&TP) specification for the network
Ta slovenski standard je istoveten z: ETS 300 210-5 Edition 1
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
SIST ETS 300 210-5:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 210-5:1998

---------------------- Page: 2 ----------------------

SIST ETS 300 210-5:1998
EUROPEAN ETS 300 210-5
TELECOMMUNICATION May 1997
STANDARD
Source: ETSI TC-SPS Reference: DE/SPS-05061-P-5
ICS: 33.020
Key words: ISDN, DSS1, supplementary service, FPH, testing, TSS&TP, network
Integrated Services Digital Network (ISDN);
Freephone (FPH) supplementary service;
Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 5: Test Suite Structure and Test Purposes (TSS&TP)
specification for the network
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail]
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1997. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 210-5:1998
Page 2
ETS 300 210-5: May 1997
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 210-5:1998
Page 3
ETS 300 210-5: May 1997
Contents
Foreword .5
1 Scope .7
2 Normative references.7
3 Definitions.8
3.1 Definitions related to conformance testing.8
3.2 Definitions related to ETS 300 210-1.8
4 Abbreviations.9
5 Test Suite Structure (TSS) .9
6 Test Purposes (TP).10
6.1 Introduction .10
6.1.1 TP naming convention.10
6.1.2 Source of TP definition.10
6.1.3 TP structure.10
6.1.4 Test strategy.11
6.2 Network TPs for FPH.12
6.2.1 Network (S/T or T).12
6.2.1.1 Calling user side .12
6.2.2 Network (S/T) .12
6.2.2.1 Called/Served user side.12
6.2.2.1.1 Normal (no queueing) .12
6.2.2.1.2 Queueing .13
6.2.2.1.2.1 Monitoring .13
6.2.2.1.2.2 Call presentation.14
6.2.3 Network (T).14
6.2.3.1 Private ISDN at called side.14
7 Compliance .16
8 Requirements for a comprehensive testing service .16
History.17

---------------------- Page: 5 ----------------------

SIST ETS 300 210-5:1998
Page 4
ETS 300 210-5: May 1997
Blank page

---------------------- Page: 6 ----------------------

SIST ETS 300 210-5:1998
Page 5
ETS 300 210-5: May 1997
Foreword
This European Telecommunication Standard (ETS) has been produced by the Signalling Protocols and
Switching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI).
This ETS is part 5 of a multi-part standard covering the Digital Subscriber Signalling System No. one
(DSS1) protocol specification for the Integrated Services Digital Network (ISDN) Freephone (FPH)
supplementary service, as described below:
Part 1: "Protocol specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for the user";
Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing
(PIXIT) proforma specification for the user";
Part 5: "TSS&TP specification for the network";
Part 6: "ATS and partial PIXIT proforma specification for the network".
Transposition dates
Date of adoption: 23 May 1997
Date of latest announcement of this ETS (doa): 31 August 1997
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 28 February 1998
Date of withdrawal of any conflicting National Standard (dow): 28 February 1998

---------------------- Page: 7 ----------------------

SIST ETS 300 210-5:1998
Page 6
ETS 300 210-5: May 1997
Blank page

---------------------- Page: 8 ----------------------

SIST ETS 300 210-5:1998
Page 7
ETS 300 210-5: May 1997
1 Scope
This fifth part of ETS 300 210 specifies the Test Suite Structure and Test Purposes (TSS&TP) for the
Network side of the T reference point or coincident S and T reference point (as defined in ITU-T
Recommendation I.411 [7]) of implementations conforming to the stage three standard for the Freephone
(FPH) supplementary service for the pan-European Integrated Services Digital Network (ISDN) by means
of the Digital Subscriber Signalling System No. one (DSS1) protocol, ETS 300 210-1 [1].
A further part of this ETS specifies the Abstract Test Suite (ATS) and partial Protocol Implementation
eXtra Information for Testing (PIXIT) proforma based on this ETS. Other parts specify the TSS&TP and
the ATS and partial PIXIT proforma for the User side of the T reference point or coincident S and
T reference point of implementations conforming to ETS 300 210-1 [1].
2 Normative references
This ETS incorporates by dated and undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ETS 300 210-1 (1996): "Integrated Services Digital Network (ISDN); Freephone
(FPH) supplementary service; Digital Subscriber Signalling System No. one
(DSS1) protocol; Part 1: Protocol specification".
[2] ETS 300 210-2 (1996): "Integrated Services Digital Network (ISDN); Freephone
(FPH) supplementary service; Digital Subscriber Signalling System No. one
(DSS1) protocol; Part 2: Protocol Implementation Conformance Statement
(PICS) proforma specification".
[3] ISO/IEC 9646-1: "Information technology - OSI Conformance Testing
Methodology and Framework; Part 1: General Concepts".
[4] ISO/IEC 9646-2: "Information technology - OSI Conformance Testing
Methodology and Framework; Part 2: Abstract Test Suite specification".
[5] ISO/IEC 9646-3: "Information technology - OSI Conformance Testing
Methodology and Framework; Part 3: The Tree and Tabular Combined
Notation".
[6] ETS 300 196-1 (1993): "Integrated Services Digital Network (ISDN); Generic
functional protocol for the support of supplementary services; Digital Subscriber
Signalling System No. one (DSS1) protocol; Part 1: Protocol specification".
[7] ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces -
Reference configurations".
[8] ETS 300 102-1: "Integrated Services Digital Network (ISDN); User-network
interface layer 3; Specifications for basic call control".
[9] ITU-T Recommendation I.112 (1993): "Vocabulary and terms for ISDNs".
[10] CCITT Recommendation E.164 (1991): "Numbering plan for the ISDN era".
[11] ITU-T Recommendation I.210 (1993): "Principles of the telecommunication
services supported by an ISDN and the means to describe them".

---------------------- Page: 9 ----------------------

SIST ETS 300 210-5:1998
Page 8
ETS 300 210-5: May 1997
3 Definitions
For the purposes of this ETS, the following definitions apply.
3.1 Definitions related to conformance testing
abstract test case: Refer to ISO/IEC 9646-1 [3].
Abstract Test Suite (ATS): Refer to ISO/IEC 9646-1 [3].
active test: A test case where the IUT is required to send a particular message, but not in reaction to a
received message. This would usually involve the use of PIXIT information to see how this message can
be generated and quite often is specified in an ATS using an implicit send event.
Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 [3].
implicit send event: Refer to ISO/IEC 9646-3 [5].
lower tester: Refer to ISO/IEC 9646-1 [3].
passive test: A test case where the IUT is required to respond to a protocol event (e.g. received
message) with another protocol event (e.g. send message) which normally does not require any special
operator intervention as associated with the implicit send event.
point of control and observation: Refer to ISO/IEC 9646-1 [3].
Protocol Implementation Conformance Statement (PICS): Refer to ISO/IEC 9646-1 [3].
PICS proforma: Refer to ISO/IEC 9646-1 [3].
Protocol Implementation eXtra Information for Testing (PIXIT): Refer to ISO/IEC 9646-1 [3].
PIXIT proforma: Refer to ISO/IEC 9646-1 [3].
system under test: Refer to ISO/IEC 9646-1 [3].
Test Purpose (TP): Refer to ISO/IEC 9646-1 [3].
3.2 Definitions related to ETS 300 210-1
call held auxiliary state: See ETS 300 196-1 [6], subclause 7.1.2.
call reference: See ETS 300 102-1 [8], subclause 4.3.
component: See ETS 300 196-1 [6], subclause 11.2.2.1.
idle auxiliary state: See ETS 300 196-1 [6], subclause 7.1.2.
Integrated Services Digital Network (ISDN): See ITU-T Recommendation I.112 [9], definition 308.
ISDN number: A number conforming to the numbering and structure specified in CCITT
Recommendation E.164 [10].
invoke component: See ETS 300 196-1 [6], subclause 11.2.2.1.
network: The DSS1 protocol entity at the Network side of the user-network interface where a T reference
point or coincident S and T reference point applies.
network (S/T): The DSS1 protocol entity at the Network side of the user-network interface where a
coincident S and T reference point applies.

---------------------- Page: 10 ----------------------

SIST ETS 300 210-5:1998
Page 9
ETS 300 210-5: May 1997
network (T): The DSS1 protocol entity at the Network side of the user-network interface where a
T reference point applies (Network connected to Private ISDN).
return error component: See ETS 300 196-1 [6], subclause 11.2.2.1.
return result component: See ETS 300 196-1 [6], subclause 11.2.2.1.
served user: The served user is the user who invokes the FPH supplementary service.
service; telecommunication service: See ITU-T Recommendation I.112 [9], definition 201.
supplementary service: See ITU-T Recommendation I.210 [11], subclause 2.4.
4 Abbreviations
For the purposes of this ETS, the following abbreviations apply:
(Held) Call Held Auxiliary state
(Idle) Idle Auxiliary state
ATM Abstract Test Method
ATS Abstract Test Suite
CR Call Reference
FPH Freephone
ISDN Integrated Services Digital Network
IUT Implementation Under Test
PICS Protocol Implementation Conformance Statement
PIXIT Protocol Implementation eXtra Information for Testing
TP Test Purpose
TSS Test Suite Structure
N00 Null call state
N04 Call Delivered call state
N06 Call Present call state
N07 Call Received call state
N09 Incoming Call Proceeding call state
N19 Release Request call state
N31 Bearer Independent Transport call state
5 Test Suite Structure (TSS)
FPH - Network
Network (S/T or T) Network (S/T) Network (T)
Calling user side Called/Served user side Private ISDN - called side
(01) (05)
Normal - no queueing Queueing
(02)
Monitoring Call Presentation
(03) (04)
NOTE: Numbers in brackets represent group numbers and are used in TP identifiers.
Figure 1: Test suite structure

---------------------- Page: 11 ----------------------

SIST ETS 300 210-5:1998
Page 10
ETS 300 210-5: May 1997
6 Test Purposes (TP)
6.1 Introduction
For each test requirement a TP is defined.
6.1.1 TP naming convention
TPs are numbered, starting at 001, within each group. Groups are organized according to the TSS.
Additional references are added to identify the actual test suite and whether it applies to the network or the
user (see table 1).
Table 1: TP identifier naming convention scheme
Identifier: __
= supplementary service: e.g. "FPH"
= type of IUT: U User
N Network
= group 2 digit field representing group reference according to TSS
= sequential number (001-999)
6.1.2 Source of TP definition
The TPs are based on ETS 300 210-1 [1].
6.1.3 TP structure
Each TP has been written in a manner which is consistent with all other TPs. The intention of this is to
make the TPs more readable and checkable. A particular structure has been used and this is illustrated in
table 2. This table should be read in conjunction with any TP, i.e. use a TP as an example to fully
understand the table.

---------------------- Page: 12 ----------------------

SIST ETS 300 210-5:1998
Page 11
ETS 300 210-5: May 1997
Table 2: Structure of a single TP
TP part Text Example
Header tab see table 1
tab subclause 0.0.0
tab XY 0.0
tab valid, invalid, inop
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SHFLILNDFLMDIntegrated Services Digital Network (ISDN); Freephone (FPH) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network33.020Telekomunikacije na splošnoTelecommunications in generalICS:Ta slovenski standard je istoveten z:ETS 300 210-5 E13SIST ETS 300 210-5:1998en01-DSULO-19983SIST ETS 300 210-5:1998SLOVENSKI
STANDARD



SIST ETS 300 210-5:1998



EUROPEANETS 300 210-5TELECOMMUNICATIONMay 1997STANDARDSource: ETSI TC-SPSReference: DE/SPS-05061-P-5ICS:33.020Key words:ISDN, DSS1, supplementary service, FPH, testing, TSS&TP, networkIntegrated Services Digital Network (ISDN);Freephone (FPH) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP)specification for the networkETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail].: [phone] - Fax: [phone]Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1997. All rights reserved.SIST ETS 300 210-5:1998



Page 2ETS 300 210-5: May 1997Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 210-5:1998



Page 3ETS 300 210-5: May 1997ContentsForeword.51Scope.72Normative references.73Definitions.83.1Definitions related to conformance testing.83.2Definitions related to ETS 300 210-1.84Abbreviations.95Test Suite Structure (TSS).96Test Purposes (TP).106.1Introduction.106.1.1TP naming convention.106.1.2Source of TP definition.106.1.3TP structure.106.1.4Test strategy.116.2Network TPs for FPH.126.2.1Network (S/T or T).126.2.1.1Calling user side.126.2.2Network (S/T).126.2.2.1Called/Served user side.126.2.2.1.1Normal (no queueing).126.2.2.1.2Queueing.136.2.2.1.2.1Monitoring.136.2.2.1.2.2Call presentation.146.2.3Network (T).146.2.3.1Private ISDN at called side.147Compliance.168Requirements for a comprehensive testing service.16History.17SIST ETS 300 210-5:1998



Page 4ETS 300 210-5: May 1997Blank pageSIST ETS 300 210-5:1998



Page 5ETS 300 210-5: May 1997ForewordThis European Telecommunication Standard (ETS) has been produced by the Signalling Protocols andSwitching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI).This ETS is part 5 of a multi-part standard covering the Digital Subscriber Signalling System No. one(DSS1) protocol specification for the Integrated Services Digital Network (ISDN) Freephone (FPH)supplementary service, as described below:Part 1:"Protocol specification";Part 2:"Protocol Implementation Conformance Statement (PICS) proforma specification";Part 3:"Test Suite Structure and Test Purposes (TSS&TP) specification for the user";Part 4:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the user";Part 5:"TSS&TP specification for the network";Part 6:"ATS and partial PIXIT proforma specification for the network".Transposition datesDate of adoption:23 May 1997Date of latest announcement of this ETS (doa):31 August 1997Date of latest publication of new National Standardor endorsement of this ETS (dop/e):28 February 1998Date of withdrawal of any conflicting National Standard (dow):28 February 1998SIST ETS 300 210-5:1998



Page 6ETS 300 210-5: May 1997Blank pageSIST ETS 300 210-5:1998



Page 7ETS 300 210-5: May 19971ScopeThis fifth part of ETS 300 210 specifies the Test Suite Structure and Test Purposes (TSS&TP) for theNetwork side of the T reference point or coincident S and T reference point (as defined in ITU-TRecommendation I.411 [7]) of implementations conforming to the stage three standard for the Freephone(FPH) supplementary service for the pan-European Integrated Services Digital Network (ISDN) by meansof the Digital Subscriber Signalling System No. one (DSS1) protocol, ETS 300 210-1 [1].A further part of this ETS specifies the Abstract Test Suite (ATS) and partial Protocol ImplementationeXtra Information for Testing (PIXIT) proforma based on this ETS. Other parts specify the TSS&TP andthe ATS and partial PIXIT proforma for the User side of the T reference point or coincident S andT reference point of implementations conforming to ETS 300 210-1 [1].2Normative referencesThis ETS incorporates by dated and undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publicationsapply to this ETS only when incorporated in it by amendment or revision. For undated references the latestedition of the publication referred to applies.[1]ETS 300 210-1 (1996): "Integrated Services Digital Network (ISDN); Freephone(FPH) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 1: Protocol specification".[2]ETS 300 210-2 (1996): "Integrated Services Digital Network (ISDN); Freephone(FPH) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 2: Protocol Implementation Conformance Statement(PICS) proforma specification".[3]ISO/IEC 9646-1: "Information technology - OSI Conformance TestingMethodology and Framework; Part 1: General Concepts".[4]ISO/IEC 9646-2: "Information technology - OSI Conformance TestingMethodology and Framework; Part 2: Abstract Test Suite specification".[5]ISO/IEC 9646-3: "Information technology - OSI Conformance TestingMethodology and Framework; Part 3: The Tree and Tabular CombinedNotation".[6]ETS 300 196-1 (1993): "Integrated Services Digital Network (ISDN); Genericfunctional protocol for the support of supplementary services; Digital SubscriberSignalling System No. one (DSS1) protocol; Part 1: Protocol specification".[7]ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces -Reference configurations".[8]ETS 300 102-1: "Integrated Services Digital Network (ISDN); User-networkinterface layer 3; Specifications for basic call control".[9]ITU-T Recommendation I.112 (1993): "Vocabulary and terms for ISDNs".[10]CCITT Recommendation E.164 (1991): "Numbering plan for the ISDN era".[11]ITU-T Recommendation I.210 (1993): "Principles of the telecommunicationservices supported by an ISDN and the means to describe them".SIST ETS 300 210-5:1998



Page 8ETS 300 210-5: May 19973DefinitionsFor the purposes of this ETS, the following definitions apply.3.1Definitions related to conformance testingabstract test case: Refer to ISO/IEC 9646-1 [3].Abstract Test Suite (ATS): Refer to ISO/IEC 9646-1 [3].active test: A test case where the IUT is required to send a particular message, but not in reaction to areceived message. This would usually involve the use of PIXIT information to see how this message canbe generated and quite often is specified in an ATS using an implicit send event.Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 [3].implicit send event: Refer to ISO/IEC 9646-3 [5].lower tester: Refer to ISO/IEC 9646-1 [3].passive test: A test case where the IUT is required to respond to a protocol event (e.g. receivedmessage) with another protocol event (e.g. send message) which normally does not require any specialoperator intervention as associated with the implicit send event.point of control and observation: Refer to ISO/IEC 9646-1 [3].Protocol Implementation Conformance Statement (PICS): Refer to ISO/IEC 9646-1 [3].PICS proforma: Refer to ISO/IEC 9646-1 [3].Protocol Implementation eXtra Information for Testing (PIXIT): Refer to ISO/IEC 9646-1 [3].PIXIT proforma: Refer to ISO/IEC 9646-1 [3].system under test: Refer to ISO/IEC 9646-1 [3].Test Purpose (TP): Refer to ISO/IEC 9646-1 [3].3.2Definitions related to ETS 300 210-1call held auxiliary state: See ETS 300 196-1 [6], subclause 7.1.2.call reference: See ETS 300 102-1 [8], subclause 4.3.component: See ETS 300 196-1 [6], subclause 11.2.2.1.idle auxiliary state: See ETS 300 196-1 [6], subclause 7.1.2.Integrated Services Digital Network (ISDN): See ITU-T Recommendation I.112 [9], definition 308.ISDN number: A number conforming to the numbering and structure specified in CCITTRecommendation E.164 [10].invoke component: See ETS 300 196-1 [6], subclause 11.2.2.1.network: The DSS1 protocol entity at the Network side of the user-network interface where a T referencepoint or coincident S and T reference point applies.network (S/T): The DSS1 protocol entity at the Network side of the user-network interface where acoincident S and T reference point applies.SIST ETS 300 210-5:1998



Page 9ETS 300 210-5: May 1997network (T): The DSS1 protocol entity at the Network side of the user-network interface where aT reference point applies (Network connected to Private ISDN).return error component: See ETS 300 196-1 [6], subclause 11.2.2.1.return result component: See ETS 300 196-1 [6], subclause 11.2.2.1.served user: The served user is the user who invokes the FPH supplementary service.service; telecommunication service: See ITU-T Recommendation I.112 [9], definition 201.supplementary service: See ITU-T Recommendation I.210 [11], subclause 2.4.4AbbreviationsFor the purposes of this ETS, the following abbreviations apply:(Held)Call Held Auxiliary state(Idle)Idle Auxiliary stateATMAbstract Test MethodATSAbstract Test SuiteCRCall ReferenceFPHFreephoneISDNIntegrated Services Digital NetworkIUTImplementation Under TestPICSProtocol Implementation Conformance StatementPIXITProtocol Implementation eXtra Information for TestingTPTest PurposeTSSTest Suite StructureN00Null call stateN04Call Delivered call stateN06Call Present call stateN07Call Received call stateN09Incoming Call Proceeding call stateN19Release Request call stateN31Bearer Independent Transport call state5Test Suite Structure (TSS)FPH - NetworkNetwork (S/T or T)Network (S/T)Network (T)Calling user side(01)Called/Served user sidePrivate ISDN - called side(05)Normal - no queueing(02)QueueingMonitoring(03)Call Presentation(04)NOTE:Numbers in brackets represent group numbers and are used in TP identifiers.Figure 1: Test suite structureSIST ETS 300 210-5:1998



Page 10ETS 300 210-5: May 19976Test Purposes (TP)6.1IntroductionFor each test requirement a TP is defined.6.1.1TP naming conventionTPs are numbered, starting at 001, within each group. Groups are organized according to the TSS.Additional references are added to identify the actual test suite and whether it applies to the network or theuser (see table 1).Table 1: TP identifier naming convention schemeIdentifier:__=supplementary service:e.g. "FPH"=type of IUT:UUserNNetwork=group2 digit field representing group reference according to TSS=sequential number(001-999)6.1.2Source of TP definitionThe TPs are based on ETS 300 210-1 [1].6.1.3TP structureEach TP has been written in a manner which is consistent with all other TPs. The intention of this is tomake the TPs more readable and checkable. A particular structure has been used and this is illustrated intable 2. This table should be read in conjunction with any TP, i.e. use a TP as an example to fullyunderstand the table.SIST ETS 300 210-5:1998



Page 11ETS 300 210-5: May 1997Table 2: Structure of a single TPTP partTextExampleHeader tabsee table 1 tabsubclause 0.0.0 tabXY 0.0 tabvalid, invalid, inopportune CR.mandatory, optional, conditionalStimulusEnsure that the IUT in theN10 etc./ /FPH Idle, . see below for message structurereceiving a XXXX messageor to request a .Reactionsends, saves, does
...