SIST EN ISO 1120:2013

Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2012)

This International Standard specifies a static test method for measuring the strength of a conveyor belt mechanical fastening; the mechanical joints can be either of the type employing a connecting rod or of a type which does not employ a connecting rod. This International Standard does not cover vulcanized joints. This International Standard is neither applicable to nor valid for light conveyor belts, as described in ISO 21183-1.

Fördergurte - Bestimmung der Festigkeit mechanischer Verbindungen - Statisches Prüfverfahren (ISO 1120:2012)

Diese Internationale Norm legt ein statisches Prüfverfahren zur Ermittlung der Festigkeit der mechanischen Verbindung eines Förderbandes fest; die mechanischen Verbindungen können einen Kupplungsstab verwenden (lösbare Verbindungen) oder ohne Kupplungsstab (nicht lösbare Verbindung) sein.
Diese Internationale Norm gilt nicht für vulkanisierte Verbindungen.
Diese Internationale Norm ist nicht anwendbar oder gültig für leichte Fördergurte nach ISO 21183-1 [1].
ANMERKUNG Mit Hilfe des in dieser Internationalen Norm beschriebenen Verfahrens werden Gurtverbindungen mit ungenügender statischer Festigkeit ausgesondert. Ein dynamisches Prüfverfahren wird zu einem späteren Zeitpunkt festgelegt werden.

Courroies transporteuses - Détermination de la résistance des assemblages agrafés - Méthode d'essai statique (ISO 1120:2012)

L'ISO 1120:2012 spécifie une méthode d'essai statique permettant de mesurer la résistance de l'assemblage agrafé d'une courroie transporteuse; il existe deux types d'assemblages mécaniques, avec ou sans jonc d'assemblage.

Naprave za kontinuirni transport - Trakovi tračnih transporterjev - Ugotavljanje trdnosti mehanskih spojev - Statična preskusna metoda (ISO 1120:2012)

Ta mednarodni standard določa statično preskusno metodo za merjenje trdnosti mehanskih spojev trakov tračnih transporterjev; mehanski spoji lahko imajo ali nimajo ojnice. Ta evropski standard ne zajema vulkaniziranih spojev. Ta mednarodni standard se ne uporablja oziroma ni veljaven za lahke trakove tračnih transporterjev iz standarda ISO 21183-1.

General Information

• Status: Published
• Public Enquiry End Date: 14-Sep-2012
• Publication Date: 13-May-2013
• ICS: 53.040.20 - Components for conveyors
• Technical Committee: DTN - Lift and transport appliances
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 11-Apr-2013
• Due Date: 16-Jun-2013
• Completion Date: 14-May-2013
• Ref Project: EN ISO 1120:2012 - Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2012)

Relations

• Replaces: SIST EN ISO 1120:2003 - Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2002)
• Effective Date: 01-Jun-2013
• Replaces: SIST EN ISO 1120:2003 - Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2002)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1120:2013
01-junij-2013
1DGRPHãþD
SIST EN ISO 1120:2003
1DSUDYH]DNRQWLQXLUQLWUDQVSRUW7UDNRYLWUDþQLKWUDQVSRUWHUMHY8JRWDYOMDQMH
WUGQRVWLPHKDQVNLKVSRMHY6WDWLþQDSUHVNXVQDPHWRGD,62
Conveyor belts - Determination of strength of mechanical fastenings - Static test method
(ISO 1120:2012)
Fördergurte - Bestimmung der Festigkeit mechanischer Verbindungen - Statisches
Prüfverfahren (ISO 1120:2012)
Courroies transporteuses - Détermination de la résistance des assemblages agrafés -
Méthode d'essai statique (ISO 1120:2012)
Ta slovenski standard je istoveten z: EN ISO 1120:2012
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST EN ISO 1120:2013 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1120:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 1120:2013


EUROPEAN STANDARD
EN ISO 1120

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2012
ICS 53.040.20 Supersedes EN ISO 1120:2002
English Version
Conveyor belts - Determination of strength of mechanical
fastenings - Static test method (ISO 1120:2012)
Courroies transporteuses - Détermination de la résistance Fördergurte - Bestimmung der Festigkeit mechanischer
des assemblages agrafés - Méthode d'essai statique (ISO Verbindungen - Statisches Prüfverfahren (ISO 1120:2012)
1120:2012)
This European Standard was approved by CEN on 30 September 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1120:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 1120:2013
EN ISO 1120:2012 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 1120:2013
EN ISO 1120:2012 (E)
Foreword
This document (EN ISO 1120:2012) has been prepared by Technical Committee ISO/TC 41 "Pulleys and
belts (including veebelts)" in collaboration with Technical Committee CEN/TC 188 “Conveyor belts” the
secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2013, and conflicting national standards shall be withdrawn at the
latest by April 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1120:2002.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 1120:2012 has been approved by CEN as a EN ISO 1120:2012 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 1120:2013

---------------------- Page: 6 ----------------------

SIST EN ISO 1120:2013
INTERNATIONAL ISO
STANDARD 1120
Fourth edition
2012-10-01
Conveyor belts — Determination of
strength of mechanical fastenings —
Static test method
Courroies transporteuses — Détermination de la résistance des
assemblages agrafés — Méthode d’essai statique
Reference number
ISO 1120:2012(E)
©
ISO 2012

---------------------- Page: 7 ----------------------

SIST EN ISO 1120:2013
ISO 1120:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 1120:2013
ISO 1120:2012(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Test piece . 2
6.1 Selection of test piece . 2
6.2 Shape, dimensions and preparation . 3
6.3 Number of test pieces . 3
6.4 Conditioning and test conditions. 3
7 Procedure . 3
7.1 For mechanical belt joints with a connecting rod . 3
7.2 For mechanical belt joints without a connecting rod . 4
8 Expression of results . 4
9 Test report . 5
Bibliography .
...