SIST EN 13513:2004
(Main)Footwear - Test methods for uppers - Deformability
Footwear - Test methods for uppers - Deformability
This European Standard specifies a test method for determining deformability of uppers or complete upper assembly, irrespective of the material, in order to assess the suitability for the end use.
Schuhe - Prüfverfahren für Obermaterialien - Verformbarkeit
Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung der Verformbarkeit von Obermaterialien oder
vollständigem Schuhwerk unabhängig vom Werkstoff fest, um die Gebrauchseigenschaften im fertigen
Zustand zu bestimmen.
Chaussures - Méthodes d'essai pour les tiges - Déformabilités
La présente Norme européenne spécifie une méthode d'essai pour déterminer la déformabilité des tiges ou assemblage complet de la tige, quel que soit le matériau qui les compose, afin d'évaluer leur aptitude à l'utilisation finale.
Footwear - Test methods for uppers - Deformability
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Footwear - Test methods for uppers - DeformabilitySchuhe - Prüfverfahren für Obermaterialien - VerformbarkeitChaussures - Méthodes d'essai pour les tiges - DéformabilitésFootwear - Test methods for uppers - Deformability61.060ObuvalaFootwearICS:Ta slovenski standard je istoveten z:EN 13513:2001SIST EN 13513:2004en01-januar-2004SIST EN 13513:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13513November 2001ICS 61.060English versionFootwear - Test methods for uppers - DeformabilityChaussures - Méthodes d'essai pour les tiges -DéformabilitésSchuhe - Prüfverfahren für Schäfte - VerformbarkeitThis European Standard was approved by CEN on 3 October 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13513:2001 ESIST EN 13513:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.