SIST EN ISO 8986-2:1999/A1:2000

Plastics - Polybutene (PB) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties - Amendment 1 (ISO 8986-2:1995/AM 1:2000)

Migrated from Progress Sheet (TC Comment) (2000-07-10): new TC forecast in BP Bli 991026

Kunststoffe - Polybuten (PB) Formmassen - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften - Änderung 1 (ISO 8986-2:1995/AM 1:2000)

Plastiques - Polybutene (PB) pour moulage et extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés - Amendement 1 (ISO 8986-2:1995/AM 1:2000)

Polimerni materiali - Materiali za oblikovanje in ekstrudiranje iz polibutena - 2. del: Priprava preskušancev in ugotavljanje lastnosti (ISO 8986-2:1995/AM 1:2000)

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2000
• Withdrawal Date: 19-Jan-2010
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 04-Jan-2010
• Due Date: 27-Jan-2010
• Completion Date: 20-Jan-2010
• Ref Project: EN ISO 8986-2:1995/A1:2000 - Plastics - Polybutene (PB) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties - Amendment 1 (ISO 8986-2:1995/AM 1:2000)

Relations

• Replaced By: SIST EN ISO 8986-2:2010 - Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009)
• Effective Date: 01-Feb-2010
• Amends: SIST EN ISO 8986-2:1999 - Plastics - Polybutene (PB) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:1995)
• Effective Date: 22-Dec-2008
• Amends: SIST EN ISO 8986-2:1999 - Plastics - Polybutene (PB) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:1995)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8986-2:1999/A1:2000
01-december-2000
Polimerni materiali - Materiali za oblikovanje in ekstrudiranje iz polibutena - 2. del:
Priprava preskušancev in ugotavljanje lastnosti (ISO 8986-2:1995/AM 1:2000)
Plastics - Polybutene (PB) moulding and extrusion materials - Part 2: Preparation of test
specimens and determination of properties - Amendment 1 (ISO 8986-2:1995/AM
1:2000)
Kunststoffe - Polybuten (PB) Formmassen - Teil 2: Herstellung von Probekörpern und
Bestimmung von Eigenschaften - Änderung 1 (ISO 8986-2:1995/AM 1:2000)
Plastiques - Polybutene (PB) pour moulage et extrusion - Partie 2: Préparation des
éprouvettes et détermination des propriétés - Amendement 1 (ISO 8986-2:1995/AM
1:2000)
Ta slovenski standard je istoveten z: EN ISO 8986-2:1995/A1:2000
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 8986-2:1999/A1:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8986-2:1999/A1:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 8986-2:1999/A1:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 8986-2:1999/A1:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 8986-2:1999/A1:2000
INTERNATIONAL ISO
STANDARD 8986-2
First edition
1995-09-01
AMENDMENT 1
2000-06-15
Plastics — Polybutene (PB) moulding
and extrusion materials —
Part 2:
Preparation of test specimens
and determination of properties
AMENDMENT 1
Plastiques — Polybutène (PB) pour moulage et extrusion —
Partie 2: Préparation des éprouvettes et détermination des propriétés
AMENDEMENT 1
Reference number
ISO 8986-2:1995/Amd.1:2000(E)
©
ISO 2000

---------------------- Page: 5 ----------------------

SIST EN ISO 8986-2:1999/A1:2000
ISO 8986-2:1995/Amd.1:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by an
...