Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001/Amd 1:2013)

This part of ISO 15245 specifies definitions, dimensions and tolerances of parallel screw threads of nominal diameter 30 mm (designated 30P), 25 mm (designated 25P) and 18 mm (designated 18P), for the connection of valves to medical and industrial gas cylinders. This part of ISO 15245 does not cover the connection requirements for:
- mechanical strength;
- gas tightness;
- capability of repeated assembly and dismounting operations.

Ortsbewegliche Gasflaschen - Zylindrische Gewinde für den Anschluss von Ventilen an Gasflaschen - Teil 1: Spezifikation (ISO 15245-1:2001/Amd 1:2013)

Bouteilles à gaz - Filetages parallèles pour le raccordement des robinets sur les bouteilles à gaz - Partie 1: Spécifications (ISO 15245-1:2001/Amd 1:2013)

Plinske jeklenke - Cilindrični navoji za priključitev ventilov na plinske jeklenke - 1. del: Specifikacija - Dopolnilo A1 (ISO 15245-1:2001/Amd 1:2013)

Ta del standarda ISO 15245 določa definicije, mere in odstopanja cilindričnih navojev nominalnega premera 30 mm (označeni s 30P), 25 mm (označeni s 25P) in18 mm (označeni z 18P) za priključitev ventilov na jeklenke za medicinske in industrijske pline. Ta del standarda ISO 15245 ne določa zahtev za priključitev za:
– mehansko trdnost;
– neprepustnost za pline;
– zmožnost večkratnega sestavljanja in razstavljanja.

General Information

Status
Withdrawn
Public Enquiry End Date
31-Aug-2012
Publication Date
15-Oct-2013
Withdrawal Date
15-Aug-2021
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
28-Jul-2021
Due Date
20-Aug-2021
Completion Date
16-Aug-2021

Relations

Buy Standard

Amendment
EN ISO 15245-1:2002/A1:2013
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
EN ISO 15245-1:2002/oprA1:2012
German language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15245-1:2002/A1:2013
01-november-2013
3OLQVNHMHNOHQNH&LOLQGULþQLQDYRML]DSULNOMXþLWHYYHQWLORYQDSOLQVNHMHNOHQNH
GHO6SHFLILNDFLMD'RSROQLOR$ ,62$PG
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1:
Specification (ISO 15245-1:2001/Amd 1:2013)
Ortsbewegliche Gasflaschen - Zylindrische Gewinde für den Anschluss von Ventilen an
Gasflaschen - Teil 1: Spezifikation (ISO 15245-1:2001/Amd 1:2013)
Bouteilles à gaz - Filetages parallèles pour le raccordement des robinets sur les
bouteilles à gaz - Partie 1: Spécifications (ISO 15245-1:2001/Amd 1:2013)
Ta slovenski standard je istoveten z: EN ISO 15245-1:2001/A1:2013
ICS:
21.040.30 Posebni navoji Special screw threads
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN ISO 15245-1:2002/A1:2013 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15245-1:2002/A1:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 15245-1:2002/A1:2013


EUROPEAN STANDARD
EN ISO 15245-1:2001/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2013
ICS 23.020.30
English Version
Gas cylinders - Parallel threads for connection of valves to gas
cylinders - Part 1: Specification (ISO 15245-1:2001/Amd 1:2013)
Bouteilles à gaz - Filetages parallèles pour le raccordement Ortsbewegliche Gasflaschen - Zylindrische Gewinde für
des robinets sur les bouteilles à gaz - Partie 1: den Anschluss von Ventilen an Gasflaschen - Teil 1:
Spécifications (ISO 15245-1:2001/Amd 1:2013) Spezifikation (ISO 15245-1:2001/Amd 1:2013)
This amendment A1 modifies the European Standard EN ISO 15245-1:2001; it was approved by CEN on 8 May 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15245-1:2001/A1:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15245-1:2002/A1:2013
EN ISO 15245-1:2001/A1:2013 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 15245-1:2002/A1:2013
EN ISO 15245-1:2001/A1:2013 (E)
Foreword
This document (EN ISO 15245-1:2001/A1:2013) has been prepared by Technical Committee ISO/TC 58 "Gas
cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the secretariat
of which is held by BSI.
This Amendment to the European Standard EN ISO 15245:2001 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by January 2014, and
conflicting national standards shall be withdrawn at the latest by January 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held respons
...

SLOVENSKI STANDARD
SIST EN ISO 15245-1:2002/oprA1:2012
01-julij-2012
3OLQVNHMHNOHQNH&LOLQGULþQLQDYRML]DSULNOMXþLWHYYHQWLORYQDMHNOHQNHGHO
6SHFLILNDFLMD'RSROQLOR$ ,62'$0
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1:
Specification (ISO 15245-1:2001/DAM 1:2012)
Ortsbewegliche Gasflaschen - Zylindrische Gewinde für den Anschluss von Ventilen an
Gasflaschen - Teil 1: Spezifikation (ISO 15245-1:2001/DAM 1:2012)
Bouteilles à gaz - Filetages parallèles pour le raccordement des robinets sur les
bouteilles à gaz - Partie 1: Spécifications (ISO 15245-1:2001/DAM 1:2012)
Ta slovenski standard je istoveten z: EN ISO 15245-1:2001/prA1
ICS:
21.040.30 Posebni navoji Special screw threads
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN ISO 15245-1:2002/oprA1:2012 de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 15245-1:2002/oprA1:2012

---------------------- Page: 2 ----------------------
SIST EN ISO 15245-1:2002/oprA1:2012


EUROPÄISCHE NORM
ENTWURF
EN ISO 15245-1:2001
EUROPEAN STANDARD

NORME EUROPÉENNE
prA1
April 2012
ICS 21.040.30; 23.020.30
Deutsche Fassung
Ortsbewegliche Gasflaschen - Zylindrische Gewinde für den
Anschluss von Ventilen an Gasflaschen - Teil 1: Spezifikation
(ISO 15245-1:2001/DAM 1:2012)
Gas cylinders - Parallel threads for connection of valves to Bouteilles à gaz - Filetages parallèles pour le raccordement
gas cylinders - Part 1: Specification (ISO 15245-
des robinets sur les bouteilles à gaz - Partie 1:
1:2001/DAM 1:2012) Spécifications (ISO 15245-1:2001/DAM 1:2012)
Dieser Änderungs-Entwurf wird den CEN-Mitgliedern zur parallelen Umfrage vorgelegt. Er wurde vom Technischen Komitee CEN/TC 23
erstellt.

Dieser Entwurf für eine Änderung A1 wird, wenn er angenommen ist, die Europäische Norm EN ISO 15245-1:2001 modifizieren. Wenn aus
diesem Änderungs-Entwurf eine Änderung wird, sind die CEN-Mitglieder gehalten, die CEN-Geschäftsordnung zu erfüllen, in der die
Bedingungen festgelegt sind, unter denen diese Änderung in der betreffenden nationalen Norm, ohne jede Änderung, einzufügen ist.

Dieser Änderungs-Entwurf wurde vom CEN in drei offiziellen Fassungen (Deutsch, Englisch, Französisch) erstellt. Eine Fassung in einer
anderen Sprache, die von einem CEN-Mitglied in eigener Verantwortung durch Übersetzung in seine Landessprache gemacht und dem
Management-Zentrum des CEN-CENELEC mitgeteilt worden ist, hat den gleichen Status wie die offiziellen

CEN-Mitglieder sind die nationalen Normungsinstitute von Belgien, Bulgarien, Dänemark, Deutsc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.