oSIST prEN IEC 61076-8-107:2022
(Main)Connectors for electrical and electronic equipment - Product requirements - Part 8-107: Power connectors - Detail specification for 2P 200 A, 1 000 V plus 2P 5 A 50 V rectangular housing shielded connectors with IP65/IP68 degree of protection when mated and locked, and IPXXB when unmated
Connectors for electrical and electronic equipment - Product requirements - Part 8-107: Power connectors - Detail specification for 2P 200 A, 1 000 V plus 2P 5 A 50 V rectangular housing shielded connectors with IP65/IP68 degree of protection when mated and locked, and IPXXB when unmated
This part of IEC 61076-8 describes free and fixed rectangular connectors with:
− 2P power plus 2P signal contacts;
− plastic housing with locking lever and four possible codings;
− 200 A rated current, 1 000 V DC rated voltage on the power section;
− 5 A rated current, 50 V DC rated voltage on the signal section;
− individual shielding around each power contact with relevant shielding termination;
− IP65/IP68 degree of protection when mated and locked and IPXXB on both plug and receptacle parts when unmated.
hereinafter referred to as a connector, for use in electrical and electronic equipment, including overall dimensions, interface dimensions, technical characteristics, performance requirements and test methods.
Connectors according to this document are intended for use in class II equipment. Hence, they are not equipped with PE contact.
Steckverbinder für elektrische und elektronische Geräte - Produktanforderungen - Teil 8-107: Leistungssteckverbinder - Bauartspezifikation für 2P 200 A, 1 000 V plus 2P 5 A 50 V geschirmte Steckverbinder mit rechteckigem Gehäuse mit Schutzart IP65/IP68 im gesteckten und verriegelten Zustand und IPXXB im ungesteckten Zustand
Connecteurs pour équipements électriques et électroniques - Exigences de produit - Partie 8-107: Connecteurs d’alimentation - Spécification particulière pour les connecteurs blindés rectangulaires à 2 pôles de 200 A et 1 000 V plus 2 pôles de 5 A et 50 V, avec un degré de protection IP65/IP68 lorsqu’ils sont accouplés et verrouillés et IPXXB lorsqu’ils sont désaccouplés, logés dans un boîtier
IEC 61076-8-107:2023 décrit les connecteurs rectangulaires libres et fixes avec:
- Puissance 2P plus contacts de signal 2P;
- boîtier en plastique avec levier de verrouillage et quatre codages possibles;
- 200 A courant nominal, tension nominale de 1 000 V CC sur la section de puissance;
- 5 A de courant nominal, 50 V CC de tension nominale sur la section de signal;
- blindage individuel autour de chaque contact de puissance avec terminaison de blindage pertinente;
- Degré de protection IP65/IP68 lorsqu’il est accouplé et verrouillé, et IPXXB sur les pièces de la fiche et de la prise lorsqu’elles ne sont pas accouplées;
- ci-après dénommé connecteur, destiné à être utilisé dans des équipements électriques et électroniques, y compris les dimensions hors tout, les dimensions d’interface, les caractéristiques techniques, les exigences de performance et les méthodes d’essai.
Konektorji za električno in elektronsko opremo - Zahteve za izdelek - 8-107. del: Močnostni konektorji - Podrobna specifikacija za konektorje 2P 200 A, 1000 V plus 2P 5 A 50 V v pravokotnih ohišjih s stopnjo zaščite IP65/IP68, če so združeni in blokirani, in IPXXB, če niso združeni
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2022
Konektorji za električno in elektronsko opremo - Zahteve za izdelek - 8-107. del:
Močnostni konektorji - Podrobna specifikacija za konektorje 2P 200 A, 1000 V plus
2P 5 A 50 V v pravokotnih ohišjih s stopnjo zaščite IP65/IP68, če so združeni in
blokirani, in IPXXB, če niso združeni
Connectors for electrical and electronic equipment - Product requirements - Part 8-107:
Power connectors - Detail specification for 2P 200 A, 1 000 V plus 2P 5 A 50 V
rectangular housing shielded connectors with IP65/IP68 degree of protection when
mated and locked, and IPXXB when unmated
Connecteurs pour équipements électriques et électroniques - Exigences de produit -
Partie 8-107: Connecteurs d’alimentation - Spécification particulière pour les
connecteurs blindés rectangulaires à 2 pôles de 200 A et 1 000 V plus 2 pôles de 5 A et
50 V, avec un degré de protection IP65/IP68 lorsqu’ils sont accouplés et verrouillés et
IPXXB lorsqu’ils sont désaccouplés, logés dans un boîtier
Ta slovenski standard je istoveten z: prEN IEC 61076-8-107:2022
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
48B/2951/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61076-8-107 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-05-06 2022-07-29
SUPERSEDES DOCUMENTS:
48B/2902/CD, 48B/2930/CC
IEC SC 48B : ELECTRICAL CONNECTORS
SECRETARIAT: SECRETARY:
United States of America Mr Jeffrey Toran
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Connectors for electrical and electronic equipment – Product requirements - Part 8-107: Power
connectors – Detail specification for 2P 200 A, 1 000 V plus 2P 5 A 50 V rectangular housing
shielded connectors with IP65/IP68 degree of protection when mated and locked, and IPXXB
when unmated
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
IEC 61076-8-107 Ed.1 IEC: 2022 – 2 – 48B/2951/CDV
1 CONTENTS
3 FOREWORD. Error! Bookmark not defined.
4 1 Scope . 8
5 2 Normative references . 8
6 3 Terms and definitions . 10
7 4 Technical information . 10
8 4.1 Recommended method of termination . 10
9 4.1.1 General . 10
10 4.1.2 Number of contacts and contact cavities . 10
11 4.2 Ratings and characteristics . 11
12 4.3 Systems of levels . 11
13 4.3.1 Performance levels . 11
14 4.3.2 Compatibility levels . 11
15 4.4 Classification into climatic categories . 11
16 4.5 Clearance and creepage distance . 11
17 4.6 Current-carrying capacity . 11
18 4.7 Marking . 11
19 5 Dimensional information . 12
20 5.1 General . 12
21 5.2 Isometric view and common features . 12
22 5.2.1 Isometric view of free connectors . 12
23 5.2.2 Isometric view of fixed connectors . 12
24 5.3 Engagement (mating) information . 12
25 5.3.1 Engagement (mating) direction . 12
26 5.3.2 Perpendicular to the engaging (mating) direction . 12
27 5.3.3 Inclination . 12
28 5.4 Free connectors . 16
29 5.4.1 Dimensions . 16
30 5.4.2 Terminations . 18
31 5.5 Fixed connectors . 13
32 5.5.1 Dimensions . 13
33 5.5.2 Terminations . 15
34 5.6 Accessories . 16
35 5.7 Mounting information . 18
36 5.8 Gauges . 18
37 5.8.1 Sizing gauges and retention force gauges . 18
38 6 Technical characteristics . 19
39 6.1 Classification into climatic categories . 19
40 6.2 Electrical characteristics . 19
41 6.2.1 Clearance and creepage distance . 19
42 6.2.2 Voltage proof . 19
43 6.2.3 Contact resistance . 19
44 6.2.4 Housing (shell) electrical continuity and shielding effectiveness . 19
45 6.2.5 Insulation resistance . 20
46 6.2.6 Current-carrying capacity . Error! Bookmark not defined.
47 6.2.7 Electrical load and temperature . 20
IEC 61076-8-107 Ed.1 IEC: 2022 – 3 – 48B/2951/CDV
48 6.3 Mechanical characteristics . 21
49 6.3.1 Mechanical operation . 21
50 6.3.2 Effectiveness of connector coupling devices . 21
51 6.3.3 Gauge retention force (resilient contact) . 21
52 6.3.4 Engaging and separating forces . 21
53 6.3.5 Contact retention in insert . 21
54 6.3.6 Polarizing and keying method . 21
55 6.4 Dynamic stress test . 22
56 6.4.1 Vibration (sine) . 22
57 6.4.2 Shock . 22
58 6.4.3 Free fall (repeated) . 22
59 6.4.4 IP degree of protection . 22
60 6.4.5 Glow-wire flammability test method for end-products (GWEPT) . 22
61 6.5 Climatic test . 23
62 6.5.1 Damp heat, steady state . 23
63 6.5.2 Rapid change of temperature . 23
64 6.5.3 Corrosion, salt mist . 23
65 6.5.4 Dry heat . 23
66 6.5.5 Cold. 23
67 6.5.6 Low air pressure . 23
68 6.6 Environmental aspects . 23
69 6.6.1 Marking of insulation material (plastic) . 23
70 6.6.2 Design/use of material . 23
71 7 Test schedule . 24
72 7.1 General . 24
73 7.2 Test schedules . 24
74 7.2.1 Basic (minimum) test schedule . 24
75 7.2.2 Full test schedule . 24
76 7.3 Test procedures and measurement methods . 33
77 7.4 Pre-conditioning . 33
78 7.5 Wiring and mounting of test specimens . 33
79 7.5.1 Wiring . 33
80 7.5.2 Mounting . 33
82 Figure 1 – Free connector . 12
83 Figure 2 – Fixed connector . 12
84 Figure 3 – Free connector . 13
85 Figure 4 – Free connector codings . 15
86 Figure 5 – Fixed connector . 16
87 Figure 6 – Fixed connector codings . 17
88 Figure 7 – Gauge for signal contacts . 18
89 Figure 8 – Gauge for power contacts . 19
90 Figure 9 –Current-temperature derating (50 mm2 wire size) . 20
92 Table 1 – Climatic category . 11
93 Table 2 – Free connector dimensions . 13
94 Table 3.1 – Free connector codings dimensions (codings 1 and 2) . 15
95 Table 3.2 – Free connector codings dimensions (codings 3 and 4) . 15
IEC 61076-8-107 Ed.1 IEC: 2022 – 4 – 48B/2951/CDV
96 Table 4 – Fixed connector dimensions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.