SIST EN IEC 61076-2-115:2023
(Main)Connectors for electrical and electronic equipment - Product requirements - Part 2-115: Circular connectors - Detail specification for 12-pole connectors with 2 A rated current and push-pull locking IP65/IP67 with metal housing (IEC 61076-2-115:2023)
Connectors for electrical and electronic equipment - Product requirements - Part 2-115: Circular connectors - Detail specification for 12-pole connectors with 2 A rated current and push-pull locking IP65/IP67 with metal housing (IEC 61076-2-115:2023)
IEC 61076-2-115:2023 describes free and fixed 12P shielded circular connectors with 2 A rated current, rated voltage up to and including 50 V AC/DC, IP65/IP67 metal housing with push-pull locking (hereinafter referred to as a connectors) for use in electrical and electronic equipment. It includes overall dimensions, interface dimensions, technical characteristics, performance requirements and test methods.
Steckverbinder für elektrische und elektronische Einrichtungen - Produktanforderungen - Teil 2-115: Rundsteckverbinder - Einzelspezifikation für 12-polige Steckverbinder mit 2 A Nennstrom und Push-Pull-Verrieglung IP65/IP67 Metallgehäuse (IEC 61076-2-115:2023)
Connecteurs pour équipements électriques et électroniques - Exigences de produit - Partie 2-115: Connecteurs circulaires - Spécification particulière relative aux connecteurs à 12 pôles avec un courant assigné de 2 A et un mécanisme de verrouillage de type pousser-tirer IP65/IP67, logés dans un boîtier métallique (IEC 61076-2-115:2023)
IEC 61076-2-115:2023 décrit les connecteurs circulaires blindés 12P libres et fixes avec courant nominal de 2 A, tension nominale inférieure ou égale à 50 V CA/CC, boîtier métallique IP65/IP67 avec verrouillage push-pull (ci-après dénommé connecteur) pour utilisation dans les équipements électriques et électroniques. Il comprend les dimensions globales, les dimensions de l’interface, les caractéristiques techniques, les exigences de performance et les méthodes d’essai.
Konektorji za električno in elektronsko opremo - Zahteve za izdelek - 2-115. del: Okrogli konektorji - Podrobna specifikacija za 12-polne konektorje z naznačenim tokom 2A in z zaskočnim zaklepanjem IP65/IP67 s kovinskim ohišjem (IEC 61076-2-115:2023)
Standard IEC 61076-2-115:2023 opisuje proste in fiksne oklopljene 12-polne konektorje z nazivnim tokom 2 A, nazivno napetostjo do vključno 50 V AC/DC, kovinskim ohišjem IP65/IP67 z zaskočnim zaklepanjem (v nadaljevanju: konektorji) za uporabo v električni in elektronski opremi. Vključuje skupne mere, mere vmesnika, tehnične lastnosti, zahteve glede delovanja in preskusne metode.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61076-2-115:2023
01-september-2023
Konektorji za električno in elektronsko opremo - Zahteve za izdelek - 2-115. del:
Okrogli konektorji - Podrobna specifikacija za 12-polne konektorje z naznačenim
tokom 2A in z zaskočnim zaklepanjem IP65/IP67 s kovinskim ohišjem (IEC 61076-2
-115:2023)
Connectors for electrical and electronic equipment - Product requirements - Part 2-115:
Circular connectors - Detail specification for 12-pole connectors with 2 A rated current
and push-pull locking IP65/IP67 with metal housing (IEC 61076-2-115:2023)
Steckverbinder für elektrische und elektronische Einrichtungen - Produktanforderungen -
Teil 2-115: Rundsteckverbinder - Einzelspezifikation für 12-polige Steckverbinder mit 2
A Nennstrom und Push-Pull-Verrieglung IP65/IP67 Metallgehäuse (IEC 61076-2-
115:2023)
Connecteurs pour équipements électriques et électroniques - Exigences de produit -
Partie 2-115: Connecteurs circulaires - Spécification particulière relative aux connecteurs
à 12 pôles avec un courant assigné de 2 A et un mécanisme de verrouillage de type
pousser-tirer IP65/IP67, logés dans un boîtier métallique (IEC 61076-2-115:2023)
Ta slovenski standard je istoveten z: EN IEC 61076-2-115:2023
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
SIST EN IEC 61076-2-115:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61076-2-115:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 61076-2-115:2023
EUROPEAN STANDARD EN IEC 61076-2-115
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2023
ICS 31.220.10
English Version
Connectors for electrical and electronic equipment - Product
requirements - Part 2-115: Circular connectors - Detail
specification for 12-pole shielded connectors with 2 A rated
current and IP65/IP67 metal housing with push-pull locking
(IEC 61076-2-115:2023)
Connecteurs pour équipements électriques et électroniques Steckverbinder für elektrische und elektronische
- Exigences de produit - Partie 2-115: Connecteurs Einrichtungen - Produktanforderungen - Teil 2-115:
circulaires - Spécification particulière relative aux Rundsteckverbinder - Einzelspezifikation für 12-polige
connecteurs blindés à 12 pôles avec un courant assigné de Steckverbinder mit 2 A Nennstrom und Push-Pull-
2 A et un boîtier métallique IP65/IP67 équipé d'un Verrieglung IP65/IP67 Metallgehäuse
mécanisme de verrouillage de type pousser-tirer (IEC 61076-2-115:2023)
(IEC 61076-2-115:2023)
This European Standard was approved by CENELEC on 2023-06-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61076-2-115:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61076-2-115:2023
EN IEC 61076-2-115:2023 (E)
European foreword
The text of document 48B/2948/CDV, future edition 1 of IEC 61076-2-115, prepared by SC 48B
"Electrical connectors" of IEC/TC 48 "Electrical connectors and mechanical structures for electrical
and electronic equipment" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 61076-2-115:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-03-27
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-06-27
document have to be withdrawn
Attention is drawn to the pos
...
SLOVENSKI STANDARD
oSIST prEN IEC 61076-2-115:2022
01-julij-2022
Konektorji za električno in elektronsko opremo - Zahteve za izdelek - 2-115. del:
Okrogli konektorji - Podrobna specifikacija za 12-polne konektorje z naznačenim
tokom 2A in z zaskočnim zaklepanjem IP65/IP67 s kovinskim ohišjem
Connectors for electrical and electronic equipment - Product requirements - Part 2–115:
Circular connectors - Detail specification for 12-pole connectors with 2 A rated current
and push-pull locking IP65/IP67 with metal housing
Connecteurs pour équipements électriques et électroniques - Exigences de produit -
Partie 2-115: Connecteurs circulaires - Spécification particulière relative aux connecteurs
à 12 pôles avec un courant assigné de 2 A et un mécanisme de verrouillage de type
pousser-tirer IP65/IP67, logés dans un boîtier métallique
Ta slovenski standard je istoveten z: prEN IEC 61076-2-115:2022
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
oSIST prEN IEC 61076-2-115:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61076-2-115:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61076-2-115:2022
48B/2948/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61076-2-115 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-05-06 2022-07-29
SUPERSEDES DOCUMENTS:
48B/2897/CD, 48B/2925/CC
IEC SC 48B : ELECTRICAL CONNECTORS
SECRETARIAT: SECRETARY:
United States of America Mr Jeffrey Toran
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Connectors for electrical and electronic equipment – Product requirements – Part 2–115:
Circular connectors – Detail specification for 12-pole connectors with 2 A rated current and
push-pull locking IP65/IP67 with metal housing
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61076-2-115:2022
IEC CDV 61076-2-115 Ed. 1 © IEC 2022 – 2 – 48B/2948/CDV
1 CONTENTS
2 FOREWORD. 5
3 1 Scope . 8
4 2 Normative references . 8
5 3 Terms and definitions . 10
6 4 Technical information . 10
7 4.1 Recommended method of termination . 10
8 4.1.1 General . 10
9 4.1.2 Number of contacts and contact cavities . 10
10 4.2 Ratings and characteristics . 11
11 4.3 Systems of levels . 11
12 4.3.1 Performance levels . 11
13 4.3.2 Compatibility levels . 11
14 4.4 Classification into climatic categories . 11
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.