SIST EN 60216-3:2004

Electrical insulating materials - Thermal endurance properties -- Part 3: Instructions for calculating thermal endurance characteristics

Specifies the calculation procedures to be used for deriving thermal endurance characteristics from experimental data obtained in accordance with the instructions of EN 60216-1 and EN 60216-2. The experimental data may be obtained using non-destructive, destructive or proof tests. Data obtained from non-destructive or proof tests may be incomplete, in that measurement of times taken to reach the endpoint may have been terminated at some point after the median time but before all specimens have reached end-point. The procedures are illustrated by worked examples, and suitable computer programs are recommended to facilitate the calculations.

Elektroisolierstoffe - Eigenschaften hinsichtlich des thermischen Langzeitverhaltens -- Teil 3: Anweisungen zur Berechnung thermischer Langzeitkennwerte

Matériaux isolants électriques - Propriétés d'endurance thermique -- Partie 3: Instructions pour le calcul des caractéristiques d'endurance thermique

Spécifie les méthodes de calcul à utiliser pour obtenir les caractéristiques d'endurance thermique à partir des données expérimentales obtenues conformément aux instructions de la EN 60216-1 et de la EN 60216-2. Les données expérimentales peuvent être obtenues en utilisant des essais non destructifs, des essais destructifs et des essais d'épreuve. Les données obtenues à partir d'essais non destructifs ou d'essais d'épreuve peuvent être incomplètes, car la mesure des temps mis pour atteindre le point limite peut avoir été arrêtée à un moment situé après le temps médian mais avant que toutes les éprouvettes n'aient atteint le point limite. Les méthodes sont illustrées par des exemples pratiques, et des programmes informatiques adaptés sont recommandés pour faciliter les calculs.

Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics (IEC 60216-3:2002)

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-2004
• Withdrawal Date: 30-Sep-2006
• ICS: 29.035.01 - Insulating materials in general
• Technical Committee: IZO - Insulating materials
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Oct-2006
• Due Date: 01-Oct-2006
• Completion Date: 01-Oct-2006
• Ref Project: EN 60216-3:2002 - Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics

Relations

• Revised: SIST EN 60216-3:2006 - Electrical insulating materials - Thermal endurance properties -- Part 3: Instructions for calculating thermal endurance characteristics
• Effective Date: 13-May-2010
• Replaces: SIST EN 60216-3-2:1998 - Guide for the determination of thermal endurance properties of electrical insulating materials -- Part 3: Instructions for calculating thermal endurance characteristics -- Section 2: Calculations for incomplete data: proof test results up to and including the median time to end-point (equal test groups)
• Effective Date: 28-Jan-2023
• Replaced By: SIST EN 60216-3:2006 - Electrical insulating materials - Thermal endurance properties -- Part 3: Instructions for calculating thermal endurance characteristics
• Effective Date: 28-Jan-2023
• Replaces: SIST HD 611.3.1 S1:1998 - Guide for the determination of thermal endurance properties of electrical insulating materials -- Part 3: Instructions for calculating thermal endurance characteristics -- Section 1: Calculations using mean values of normally distributed complete data
• Effective Date: 28-Jan-2023

Standards Content (Sample)

EUROPEAN STANDARD EN 60216-3
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2002
ICS 17.220.99;19.020;29.035.01 Supersedes HD 611.3.1 S1:1992 & EN 60216-3-2:1995
English version
Electrical insulating materials -
Thermal endurance properties
Part 3: Instructions for calculating
thermal endurance characteristics
(IEC 60216-3:2002)
Matériaux isolants électriques - Elektroisolierstoffe -
Propriétés d'endurance thermique Eigenschaften hinsichtlich
Partie 3: Instructions pour le calcul des thermischen Langzeitverhaltens
des caractéristiques d'endurance thermique Teil 3: Anweisungen zur Berechnung
(CEI 60216-3:2002) thermischer Langzeitkennwerte
(IEC 60216-3:2002)
This European Standard was approved by CENELEC on 2002-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60216-3:2002 E

---------------------- Page: 1 ----------------------

EN 60216-3:2002 - 2 -
Foreword
The text of document 15E/162/FDIS, future edition 1 of IEC 60216-3, prepared by SC 15E, Methods of
test, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and was
approved by CEN
...