SIST EN ISO 7042:2001

Prevailing torque type all-metal hexagon nuts - Property classes 5, 8, 10 and 12 (ISO 7042:1997)

Sechskantmuttern mit Klemmteil (Ganzmetallmuttern), Typ 2 - Festigkeitsklassen 5, 8, 10 und 12 (ISO 7042:1997)

Diese Internationale Norm beschreibt die Eigenschaften von Sechskantmuttern mit Klemmteil (Ganzmetallmuttern), Typ 2, mit Gewinde M5 bis M36, in Produktklasse A für Gewinde bis M16 und Produktklasse B für Gewinde über M16 und mit Festigkeitsklassen 5, 8, 10 und 12. Anmerkungen: 1) Die Maße der Muttern entsprechen den in ISO 4033 angegebenen Maßen, mit Ausnahme der Maße mw und hmax; 2) Muttern mit Festigkeitsklasse 9 werden in ISO 7720 behandelt. Werden in besonderen Fällen andere Festlegungen benötigt, so sind diese den bestehenden Internationalen Normen zu entnehmen, z.B. ISO 261, ISO 965-2.

Ecrous hexagonaux autofreinés tout métal - Classes de qualité 5, 8, 10 et 12 (ISO 7042:1997)

La présente Norme internationale prescrit les caractéristiques des écrous hexagonaux autofreinés tout métal, style 2, de filetage M5 à M36 inclus, de grade A pour filetages < M16 et de grade B pour filetages > M16, et de classes de qualité 5, 8, 10 et 12.
NOTES 1 Les dimensions des écrous, à l'exception des dimensions mw et hmax, sont conformes à celles données dans l'ISO 4033. 2 Les écrous de classe de qualité 9 font l'objet de l'ISO 7720. Si d'autres spécifications sont requises, il est recommandé de les choisir dans les Normes internationales existantes, par exemple ISO 261, ISO 965-2, ISO 2320 et ISO 4759-1.

Šestrobe zaščitne matice z deformacijo, tip 2 - Razredi trdnosti 5, 8, 10 in 12 (ISO 7042:1997)

General Information

• Status: Withdrawn
• Publication Date: 30-Jun-2001
• Withdrawal Date: 19-Mar-2013
• ICS: 21.060.20 - Nuts
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 19-Mar-2013
• Due Date: 11-Apr-2013
• Completion Date: 20-Mar-2013
• Ref Project: EN ISO 7042:1997 - Prevailing torque type all-metal hexagon nuts - Property classes 5, 8, 10 and 12 (ISO 7042:1997)

Relations

• Replaced By: SIST EN ISO 7042:2013 - Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012)
• Effective Date: 01-May-2013
• Revised: SIST EN ISO 7042:2013 - Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012)
• Effective Date: 25-Jan-2012
• Replaces: SIST ISO 7042:1996 - Prevailing torque type all-metal hexagon nuts, style 2 -- Property classes 5, 8, 10 and 12
• Effective Date: 01-Jul-2001

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7042:2001
01-julij-2001
1DGRPHãþD
SIST ISO 7042:1996
âHVWUREH]DãþLWQHPDWLFH]GHIRUPDFLMRWLS5D]UHGLWUGQRVWLLQ,62

Prevailing torque type all-metal hexagon nuts - Property classes 5, 8, 10 and 12 (ISO
7042:1997)
Sechskantmuttern mit Klemmteil (Ganzmetallmuttern), Typ 2 - Festigkeitsklassen 5, 8,
10 und 12 (ISO 7042:1997)
Ecrous hexagonaux autofreinés tout métal - Classes de qualité 5, 8, 10 et 12 (ISO
7042:1997)
Ta slovenski standard je istoveten z: EN ISO 7042:1997
ICS:
21.060.20 Matice Nuts
SIST EN ISO 7042:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7042:2001

---------------------- Page: 2 ----------------------

SIST EN ISO 7042:2001

---------------------- Page: 3 ----------------------

SIST EN ISO 7042:2001

---------------------- Page: 4 ----------------------

SIST EN ISO 7042:2001

---------------------- Page: 5 ----------------------

SIST EN ISO 7042:2001

---------------------- Page: 6 ----------------------

SIST EN ISO 7042:2001
INTERNATIONAL ISO
STANDARD 7042
Second edition
1997-11-15
Prevailing torque type all-metal hexagon
nuts, style 2 — Property classes 5, 8, 10
and 12
Écrous hexagonaux autofreinés tout métal, style 2 — Classes
de qualité 5, 8, 10 et 12
.
A
Reference number
ISO 7042:1997(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 7042:2001
ISO 7042:1997(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 7042 was prepared by Technical Committee
ISO/TC 2, Fasteners, Subcommittee SC 1, Mechanical properties of
fasteners.
This second edition cancels and replaces the first edition (ISO 7042:1983),
which has been technically revised.
Annex A of this International Standard is for information only.
©  ISO 1997
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
X.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 7042:2001
©
INTERNATIONAL STANDARD  ISO ISO 7042:1997(E)
Prevailing torque type all-metal hexagon nuts, style 2 —
Property classes 5, 8, 10 and 12
1 Scope
This International Standard specifies the characteristics of prevailing torque type all-metal hexagon nuts,
style 2, with threads from M5 up to and including M36, in product grade A for threads up to and including M16
and product grade B for threads above M16, and with property classes 5, 8, 10 and 12.
NOTES
1 The dimensions of the nuts with the exception of the dimensions m and h correspond to those
w max
given in ISO 4033.
2 Nuts of property class 9 are dealt with in ISO 7720.
If other specifications are required, they should be selected from existing International Standards, for example
ISO 261, ISO 965-2, ISO 2320 and ISO 4759-1.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this
International Standard. At the time of publication, the editions indicated were valid. All standards are subject
to revision, and parties to agreements based on this
...