oSIST prEN 4165-027:2023
(Main)Aerospace series - Connector, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 027: Rack and panel rear mounted plug for 2 and 4 modules, series 3 - Product standard
Aerospace series - Connector, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 027: Rack and panel rear mounted plug for 2 and 4 modules, series 3 - Product standard
This document specifies the rack and panel rear mounted plug 2 and 4 modules, series 3 used in the family of rectangular electrical connectors. The receptacles corresponding to those plugs are specified in EN 4165-002.
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 °C konstant - Teil 027: Freier rückseitiger Einschub- und Gehäusesteckverbinder mit 2 und 4 Modulen, Serie 3 - Produktnorm
Série aérospatiale - Connecteurs électriques rectangulaires, modulaires - Température d'utilisation 175 °C continu - Partie 027 : Fiches de rack à fixations inversées 2 et 4 modules, série 3 - Norme de produit
Le présent document spécifie les fiches de rack à fixations inversées série 3, pour 2 et 4 modules, utilisées dans la famille des connecteurs électriques rectangulaires. Les embases correspondant à ces fiches sont spécifiées dans l’EN 4165-002.
Aeronavtika - Konektorji, električni, pravokotni, modularni - Stalna delovna temperatura 175 °C - 027. del: Zadnji vtič za stojalo in ploščo za 2 in 4 module, serije 3 - Standard za proizvod
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 4165-027:2023
01-maj-2023
Nadomešča:
SIST EN 4165-027:2016
Aeronavtika - Konektorji, električni, pravokotni, modularni - Stalna delovna
temperatura 175 °C - 027. del: Zadnji vtič za stojalo in ploščo za 2 in 4 module,
serije 3 - Standard za proizvod
Aerospace series - Connector, electrical, rectangular, modular - Operating temperature
175 °C continuous - Part 027: Rack and panel rear mounted plug for 2 and 4 modules,
series 3 - Product standard
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise -
Betriebstemperatur 175 °C konstant - Teil 027: Freier rückseitiger Einschub- und
Gehäusesteckverbinder mit 2 und 4 Modulen, Serie 3 - Produktnorm
Série aérospatiale - Connecteurs électriques rectangulaires, modulaires - Température
d'utilisation 175 °C continu - Partie 027 : Fiches de rack à fixations inversées 2 et 4
modules, série 3 - Norme de produit
Ta slovenski standard je istoveten z: prEN 4165-027
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 4165-027:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 4165-027:2023
---------------------- Page: 2 ----------------------
oSIST prEN 4165-027:2023
DRAFT
EUROPEAN STANDARD
prEN 4165-027
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2023
ICS 49.060 Will supersede EN 4165-027:2015
English Version
Aerospace series - Connector, electrical, rectangular,
modular - Operating temperature 175 °C continuous - Part
027: Rack and panel rear mounted plug for 2 and 4
modules, series 3 - Product standard
Série aérospatiale - Connecteurs électriques Luft- und Raumfahrt - Elektrischer
rectangulaires, modulaires - Température d'utilisation Rechtecksteckverbinder in modularer Bauweise -
175 °C continu - Partie 027 : Fiches de rack à fixations Betriebstemperatur 175 °C konstant - Teil 027: Freier
inversées 2 et 4 modules, série 3 - Norme de produit rückseitiger Einschub- und Gehäusesteckverbinder mit
2 und 4 Modulen, Serie 3 - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4165-027:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4165-027:2023
prEN 4165-027:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
5 Rack and panel rear plug . 4
5.1 For 2 modules classes W, F . 4
5.2 For 4 modules classes W, F .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.