iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST-TP CR 1831:2003

(Main)

CIM Systems Architecture - Enterprise model execution and integration services - Evaluation report

CIM Systems Architecture - Enterprise model execution and integration services - Evaluation report

This Evaluation Report reviews contributions received from projects in answer to a call for input on a Framework for Integrating Infrastructure. It should be read in conjunction with the Statement of Requirements which introduces the concepts used in the evaluation process.
In accordance with the mandate reproduced as Annex A, this report is concerned with:
- The "collection and evaluation of existing separate initiatives on Frameworks for ...Enterprise Model Execution and Integration Services" for the execution of enterprise models specific to CIM and model components.
- "As a requirement, such initiatives shall be in line with the ENVs developed through Mandate BC-62 and with ENV 40 003".
This work is a preliminary step towards the drafting of a "European Standard (ENV in the first phase) defining the requirements [for a] Framework for the Enterprise Model Execution and Integration Services within the areas of CIM Systems Architecture" (with reference to work items M.0.1.4.1 and M.0.1.4.2 of CEN/TC 310 N33 Issue A, August 1993.
The enterprise model(s) have to support integration of physical components, integration of applications and information, and, at the highest level, integration of business requirements. The use of such enterprise models requires supporting services, EMEIS.
The overall requirement for the EMEIS is:
- To support the execution of a model or model components or the day to day management of the enterprise, and
- To support the embedding of these model componenents into and within the supporting execution environment.
Particular requirements for the EMEIS are currently foreseen as the ability to support:
- On-going changes in the modus operandi of the enterprise,
- Life-cycle concerns for models and model components,
- Structures and objects composed of data of different kinds and from different sources,
- Co-ordination of the structures and objects.

Sistemska arhitektura računalniško integrirane proizvodnje (CIM) – Storitve za izvajanje podjetniškega modela in integracijo – Evalvacijsko poročilo

General Information

Status
Withdrawn
Publication Date
30-Sep-2003
Withdrawal Date
03-Sep-2019
ICS
35.240.50 - IT applications in industry
Technical Committee
ITC - Information technology
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
04-Sep-2019
Due Date
27-Sep-2019
Completion Date
04-Sep-2019
Ref Project
CR 1831:1995 - CIM Systems Architecture - Enterprise model execution and integration services - Evaluation report

Buy Standard

TP CR 1831:2003TP CR 1831:2003
PreviousNext
Technical report
TP CR 1831:2003
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CR 1831:2003
01-oktober-2003
6LVWHPVNDDUKLWHNWXUDUDþXQDOQLãNRLQWHJULUDQHSURL]YRGQMH &,0 ±6WRULWYH]D
L]YDMDQMHSRGMHWQLãNHJDPRGHODLQLQWHJUDFLMR±(YDOYDFLMVNRSRURþLOR
CIM Systems Architecture - Enterprise model execution and integration services -
Evaluation report
Ta slovenski standard je istoveten z: CR 1831:1995
ICS:
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST-TP CR 1831:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CR 1831:2003

---------------------- Page: 2 ----------------------

SIST-TP CR 1831:2003

---------------------- Page: 3 ----------------------

SIST-TP CR 1831:2003

---------------------- Page: 4 ----------------------

SIST-TP CR 1831:2003

---------------------- Page: 5 ----------------------

SIST-TP CR 1831:2003

---------------------- Page: 6 ----------------------

SIST-TP CR 1831:2003

---------------------- Page: 7 ----------------------

SIST-TP CR 1831:2003

---------------------- Page: 8 ----------------------

SIST-TP CR 1831:2003

---------------------- Page: 9 ----------------------

SIST-TP CR 1831:2003

---------------------- Page: 10 ----------------------

SIST-TP CR 1831:2003

---------------------- Page: 11 ----------------------

SIST-TP CR 1831:2003

---------------------- Page: 12 ----------------------

SIST-TP CR 1831:2003

---------------------- Page: 13 ----------------------

SIST-TP CR 1831:2003

---------------------- Page: 14 --
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 19439:2006/AC:2013(Corrigendum)
Enterprise integration - Framework for enterprise modelling (ISO 19439:2006/Cor 1:2006)
EN ISO 19439:2006/AC:2007

This International Standard specifies a framework conforming to requirements of ISO 15704, which serves as a common basis to identify and coordinate standards development for modelling of enterprises, emphasising, but not restricted to, computer integrated manufacturing. This International Standard also serves as the basis for further standards for the development of models that will be computer-enactable and enable business process model-based decision support leading to model-based operation, monitoring and control. In this International Standard, four enterprise model views are defined in this framework. Additional views for particular user concerns can be generated but these additional views are not part of this International Standard. Possible additional views are identified in ISO 15704.

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11354-1:2011(Main)
Advanced automation technologies and their applications - Requirements for establishing manufacturing enterprise process interoperability - Part 1: Framework for enterprise interoperability (ISO 11354-1:2011)
EN ISO 11354-1:2011

The purpose of this part of ISO 11354 is to specify a Framework for Enterprise Interoperability (FEI) that establishes dimensions and viewpoints to address interoperability barriers, their potential solutions, and the relationships between them. ISO 11354 applies to manufacturing enterprises, but can also apply to other kinds of enterprises. It is intended for use by stakeholders who are concerned with developing and deploying solutions based on information and communication technology for manufacturing enterprise process interoperability. It focuses on, but is not restricted to, enterprise (manufacturing or service) interoperability. This part of ISO 11354 specifies the following: - viewpoints for addressing stakeholder concerns for the exchange of entities (information objects or physical objects) at the operational levels of enterprises at which interoperability is required; - a framework for structuring these stakeholder concerns (business, process, service, data), the barriers relating to enterprise interoperability (conceptual, technological, organizational) and the approaches to overcome barriers (integrated, unified, federated), with contents identifying the various kinds of solutions available to enable interoperability. This part of ISO 11354 does not specify the specific mechanisms for the exchange of entities (information objects or physical objects), nor the manner in which interoperability solutions are implemented. Three annexes provide additional information. Annex A describes how existing interoperability frameworks can be related to the concepts of this framework. Annex B shows examples of using the FEI to identify and categorize interoperability barriers, knowledge and solutions. Annex C provides a methodological guideline on how the FEI can be used in an interoperability engineering project.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19439:2006(Main)
Enterprise integration - Framework for enterprise modelling (ISO 19439:2006)
EN ISO 19439:2006

This International Standard specifies a framework conforming to requirements of ISO 15704, which serves as a common basis to identify and coordinate standards development for modelling of enterprises, emphasising, but not restricted to, computer integrated manufacturing. This International Standard also serves as the basis for further standards for the development of models that will be computer-enactable and enable business process model-based decision support leading to model-based operation, monitoring and control. In this International Standard, four enterprise model views are defined in this framework. Additional views for particular user concerns can be generated but these additional views are not part of this International Standard. Possible additional views are identified in ISO 15704.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62351-3:2023(Main)
Power systems management and associated information exchange - Data and communications security - Part 3: Communication network and system security - Profiles including TCP/IP
EN IEC 62351-3:2023

IEC 62351-3:2023 specifies how to provide confidentiality, integrity protection, and message level authentication for protocols that make use of TCP/IP as a message transport layer and utilize Transport Layer Security when cyber-security is required. This may relate to SCADA and telecontrol protocols, but also to additional protocols if they meet the requirements in this document.
IEC 62351-3 specifies how to secure TCP/IP-based protocols through constraints on the specification of the messages, procedures, and algorithms of Transport Layer Security (TLS) (TLSv1.2 defined in RFC 5246, TLSv1.3 defined in RFC 8446). In the specific clauses, there will be subclauses to note the differences and commonalities in the application depending on the target TLS version. The use and specification of intervening external security devices (e.g., "bump-in-the-wire") are considered out-of-scope.
In contrast to previous editions of this document, this edition is self-contained in terms of completely defining a profile of TLS. Hence, it can be applied directly, without the need to specify further TLS parameters, except the port number, over which the communication will be performed. Therefore, this part can be directly utilized from a referencing standard and can be combined with further security measures on other layers. Providing the profiling of TLS without the need for further specifying TLS parameters allows declaring conformity to the described functionality without the need to involve further IEC 62351 documents.
This document is intended to be referenced as a normative part of other IEC standards that have the need for providing security for their TCP/IP-based protocol exchanges under similar boundary conditions. However, it is up to the individual protocol security initiatives to decide if this document is to be referenced.
The document also defines security events for specific conditions, which support error handling, security audit trails, intrusion detection, and conformance testing. Any action of an organization in response to events to an error condition described in this document are beyond the scope of this document and are expected to be defined by the organization’s security policy.
This document reflects the security requirements of the IEC power systems management protocols. Should other standards bring forward new requirements, this document may need to be revised.
This second edition cancels and replaces the first edition published in 2014, Amendment 1:2018 and Amendment 2:2020. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Inclusion of the TLSv1.2 related parameter required in IEC 62351-3 Ed.1.2 to be specified by the referencing standard. This comprises the following parameter:
• Mandatory TLSv1.2 cipher suites to be supported.
• Specification of session resumption parameters.
• Specification of session renegotiation parameters.
• Revocation handling using CRL and OCSP.
• Handling of security events.
b) Inclusion of a TLSv1.3 profile to be applicable for the power system domain in a similar way as for TLSv1.2 session.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61918:2019/A12:2023(Amendment)
Industrial communication networks - Installation of communication networks in industrial premises
EN IEC 61918:2018/A12:2023

This document specifies basic requirements for the installation of media for communication networks within and between the automation islands, of industrial sites. This standard covers balanced and optical fibre cabling. It also covers the cabling infrastructure for wireless media, but not the wireless media itself. Additional media are covered in the IEC 61784-5 series.
This document is a companion standard to the communication networks of the industrial automation islands and especially to the communication networks specified in the IEC 61158 series and the IEC 61784 series.
In addition, this document covers the connection between the generic telecommunications cabling specified in ISO/IEC 11801-3 and the specific communication cabling of an automation island, where an automation outlet (AO) replaces the telecommunication outlet (TO) of ISO/IEC 11801-3.
NOTE If the interface used at the AO does not conform to that specified for the TO of ISO/IEC 11801-3, the cabling no longer conforms to ISO/IEC 11801-3 although certain features, including performance, of generic cabling may be retained.
This document provides guidelines that cope with the critical aspects of the industrial automation area (safety, security and environmental aspects such as mechanical, liquid, particulate, climatic, chemicals and electromagnetic interference).
This document does not recognise implementations of power distribution with or through Ethernet balanced cabling systems that are not specified in IEEE 802.3af and in IEEE 802.3at.
This document deals with the roles of planner, installer, verifier, and acceptance test personnel, administration and maintenance personnel and specifies the relevant responsibilities and/or gives guidance.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61987-31:2023(Main)
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 31: List of Properties (LOPs) of infrastructure devices for electronic data exchange - Generic structures (IEC 61987-31:2022)
EN IEC 61987-31:2023

This part of IEC 61987 provides
• a characterization for the integration of infrastructure devices in the Common Data
Dictionary (CDD);
• generic structures in conformance with IEC 61987-10 for Operating Lists of Properties
(OLOPs) and Device Lists of Properties (DLOPs) of infrastructure devices.
The generic structures for the OLOP and DLOP contain the most important blocks for
infrastructure devices. Blocks pertaining to a specific equipment type will be described in the
corresponding part of the IEC 61987 series. Similarly, equipment properties are not part of this
part of IEC 61987. For instance, the OLOP and DLOP for I/O-modules are to be found in
IEC 61987-32.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62351-5:2023(Main)
Power systems management and associated information exchange - Data and communications security - Part 5: Security for IEC 60870-5 and derivatives (IEC 62351-5:2023)
EN IEC 62351-5:2023

This part of IEC 62351 defines the application authentication mechanism (A-profile) specifying messages, procedures and algorithms for securing the operation of all protocols based on or derived from IEC 60870-5: Telecontrol Equipment and Systems - Transmission Protocols.
This Standard applies to at least those protocols listed in Table 1.
[Table 1]
The initial audience for this International Standard is intended to be the members of the working groups developing the protocols listed in Table 1.
For the measures described in this standard to take effect, they must be accepted and referenced by the specifications for the protocols themselves. This document is written to enable that process. The working groups in charge of take this standard to the specific protocols listed in Table 1 may choose not to do so.
The subsequent audience for this specification is intended to be the developers of products that implement these protocols.
Portions of this standard may also be of use to managers and executives in order to understand the purpose and requirements of the work.
This document is organized working from the general to the specific, as follows:
- Clauses 2 through 4 provide background terms, definitions, and references.
- Clause 5 describes the problems this specification is intended to address.
- Clause 6 describes the mechanism generically without reference to a specific protocol.
- Clauses 7 and 8 describe the mechanism more precisely and are the primary normative part of this specification.
- Clause 9 define the interoperability requirements for this authentication mechanism.
- Clause 10 describes the requirements for other standards referencing this specification
Unless specifically labelled as informative or optional, all clauses of this specification are normative.

  • Standard
    126 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62714-2:2023(Main)
Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 2: Semantics libraries (IEC 62714-2:2022)
EN IEC 62714-2:2022

The IEC 62714 series specifies an engineering data exchange format for use in industrial automation systems.
This part of IEC 62714 specifies normative as well as informative AML libraries for the modelling of engineering information for the exchange between engineering tools in the plant automation area by means of AML. Moreover, it presents additional user defined libraries as an example. Its provisions apply to the export/import applications of related tools.
This part of IEC 62714 specifies AML role class libraries and AML attribute type libraries. Role classes provide semantics to AML objects, attribute types provide semantics to AML attributes. The association of role classes to AML objects or attribute types to AML attributes represent the possibility to add (also external) semantic to it. By associating a role class to an AML object or an attribute type to an AML attribute,it gets a semantic.This part of IEC 62714 does not define details of the data exchange procedure or implementation requirements for the import/export tools.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62453-2:2022(Main)
Field device tool (FDT) interface specification - Part 2: Concepts and detailed description (IEC 62453-2:2022)
EN IEC 62453-2:2022

This part of IEC 62453 explains the common principles of the field device tool concept. These
principles can be used in various industrial applications such as engineering systems,
configuration programs and monitoring and diagnostic applications.
This document specifies the general objects, general object behavior and general object
interactions that provide the base of FDT.

  • Standard
    168 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62453-309:2022(Main)
Field device tool (FDT) interface specification - Part 309: Communication profile integration - IEC 61784 CPF 9 (IEC 62453-309:2022)
EN IEC 62453-309:2022

Communication Profile Family 9 (commonly known as HART®1) defines communication profiles based on IEC 61158-5-20 and IEC 61158-6-20. The basic profile CP 9/1 is defined in IEC 61784-1.
This part of IEC 62453 provides information for integrating the HART® technology into the FDT standard (IEC 62453-2).
This part of the IEC 62453 specifies communication and other services.
This standard neither contains the FDT specification nor modifies it.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day