Fasteners - Hexagon high nuts (style 2), with fine pitch thread (ISO/DIS 8674:2022)

Mechanische Verbindungselemente – Hohe Sechskantmuttern (Typ 2), mit Feingewinde (ISO/DIS 8674:2022)

Diese Internationale Norm legt Eigenschaften von Sechskantmuttern (Typ 2) mit Feingewinde mit Nenndurchmessern von 8 mm bis 39 mm fest. Für die Gewindenenndurchmesser D ≤ 16 mm gilt Produktklasse A und für die Gewindenenndurchmesser D > 16 mm Produktklasse B.

Fixations - Écrous hexagonaux hauts (style 2), à pas fin (ISO/DIS 8674:2022)

Vezni elementi - Šestrobe visoke matice (tip 2) z drobnim metrskim navojem (ISO/DIS 8674:2022)

General Information

Status
Not Published
Public Enquiry End Date
11-Jul-2022
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
28-Mar-2023
Due Date
02-Apr-2023
Completion Date
28-Mar-2023

Relations

Buy Standard

Draft
prEN ISO 8674:2022
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 8674:2022
01-junij-2022
Vezni elementi - Šestrobe visoke matice (tip 2) z drobnim metrskim navojem
(ISO/DIS 8674:2022)
Fasteners - Hexagon high nuts (style 2), with fine pitch thread (ISO/DIS 8674:2022)
Mechanische Verbindungselemente – Hohe Sechskantmuttern (Typ 2), mit Feingewinde
(ISO/DIS 8674:2022)
Fixations - Écrous hexagonaux hauts (style 2), à pas fin (ISO/DIS 8674:2022)
Ta slovenski standard je istoveten z: prEN ISO 8674
ICS:
21.040.10 Metrski navoji Metric screw threads
21.060.20 Matice Nuts
oSIST prEN ISO 8674:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 8674:2022

---------------------- Page: 2 ----------------------
oSIST prEN ISO 8674:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 8674
ISO/TC 2/SC 12 Secretariat: DIN
Voting begins on: Voting terminates on:
2022-04-20 2022-07-13
Fasteners — Hexagon high nuts (style 2), with fine pitch
thread
ICS: 21.060.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 8674:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 8674:2022
ISO/DIS 8674:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 8674:2022
ISO/DIS 8674:2022(E)
Contents Page
Foreword .iv
1  Scope . 1
2  Normative references . 1
3  Terms and definitions . 1
4 Dimensions .2
5  Requirements and reference International Standards . 3
6 Marking and labelling . 4
6.1 Marking on product . . 4
6.2 Labelling on package . 5
7 Designation . 5
Bibliography . 6
iii
© ISO 2022 – All rights reserved

---------------------- Page: 5 ----------------------
oSIST prEN ISO 8674:2022
ISO/DIS 8674:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO's adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 2, Fasteners, Subcommittee SC 12, Fasteners
with metric internal thread.
This fifth edition cancels and replaces the fourth edition (ISO 8674:2012).
The main changes compared to the previous edition are as follows:
— M18×2, M22×2 and M39×3 have been added;
— d has been specified with two decimal places;
a,max
— for steel nuts, quenching and tempering condition has been specified in accordance with ISO 898-2;
— stainless steel nuts have been added;
— specifications for marking and labelling have been added as Clause 6.
Any feedback or questions on this document should be directed to the user's national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
  © ISO 2022 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 8674:2022
DRAFT INTERNATIONAL STANDARD ISO/DIS 8674:2022(E)
Fasteners — Hexagon high nuts (style 2), with fine pitch
thread
1  Scope
This document specifies the characteristics of hexagon high nuts (style 2), in steel and stainless steel,
with metric fine pitch thread 8 mm to 39 mm, and with product grades A and B.
If in certain cases other specifications are requested, property classes and stainless steel grades can be
selected from ISO 898-2 or ISO 3506-2.
2  Normative references
The following documents are referred to in the text in such a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.