SIST IEC/TR 60870-6-1:1997

Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 1: Application context and organization of standards

This technical report of type 3 shows the place of part 6 within IEC 60870 and gives an overview of its organization and contents. The aim of part 6 is the standardization of functional profiles for electric power systems.[
]This publication has the status of a Technical Report - type 3.

Matériels et systèmes de téléconduite - Partie 6: Protocoles de téléconduite compatibles avec les normes ISO et les recommandations de l'UIT-T - Section 1: Contexte applicatif et organisation des normes

Ce rapport technique du type 3 situe la partie 6 dans la série CEI 60870 et donne une vue d'ensemble de son organisation et de son contenu. Le but de cette partie 6 est la normalisation de profils fonctionnels pour les réseaux électriques.[
]Cette publication a le statut d'un rapport technique - type 3.

Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section1: Application context and organization of standards

General Information

• Status: Published
• Publication Date: 31-Jul-1997
• ICS: 33.200 - Telecontrol. Telemetering
• Technical Committee: PSE - Power systems management
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Aug-1997
• Due Date: 01-Aug-1997
• Completion Date: 01-Aug-1997
• Ref Project: IEC TR 62728:2011 - Display technologies - LCD, PDP and OLED - Overview and explanation of differences in terminology

Standards Content (Sample)

SLOVENSKI STANDARD
SIST IEC/TR 60870-6-1:1997
01-avgust-1997
Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with
ISO standards and ITU-T recommendations - Section1: Application context and
organization of standards
Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO
standards and ITU-T recommendations - Section 1: Application context and organization
of standards
Matériels et systèmes de téléconduite - Partie 6: Protocoles de téléconduite compatibles
avec les normes ISO et les recommandations de l'UIT-T - Section 1: Contexte applicatif
et organisation des normes
Ta slovenski standard je istoveten z: IEC/TR 60870-6-1
ICS:
33.200 Daljinsko krmiljenje, daljinske Telecontrol. Telemetering
meritve (telemetrija)
SIST IEC/TR 60870-6-1:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 2 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 3 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 4 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 5 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 6 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 7 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 8 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 9 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 10 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 11 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 12 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 13 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 14 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 15 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 16 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 17 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 18 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 19 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 20 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 21 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 22 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 23 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 24 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 25 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 26 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 27 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 28 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 29 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 30 ----------------------

SIST IEC/TR 60870-6-1:1997

---------------------- Page: 31 ----------------------

SIST IEC/TR 60870-6-1:1997

---------
...

IEC/TR 62728
®

Edition 1.0 2011-09
TECHNICAL
REPORT




Display technologies – LCD, PDP and OLED – Overview and explanation of
differences in terminology


IEC/TR 62728:2011(E)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2011 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
 Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
 IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
 Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
 Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]

---------------------- Page: 2 ----------------------
IEC/TR 62728
®

Edition 1.0 2011-09
TECHNICAL
REPORT



Display technologies – LCD, PDP and OLED – Overview and explanation of
differences in terminology


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
L
ICS 31.120; 31.260 ISBN 978-2-88912-695-8

® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – TR 62728 © IEC:2011(E)
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Covered terms . 7
4 Explanation . 7

---------------------- Page: 4 ----------------------
TR 62728 © IEC:2011(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

DISPLAY TECHNOLOGIES –
LCD, PDP AND OLED –
OVERVIEW AND EXPLANATION OF
DIFFERENCES IN TERMINOLOGY


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a technical report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC 62728, which is a technical report, has been prepared by IEC technical committee 110:
Flat panel display devices.
The text of this technical report is based on the following documents:
Enquiry draft Report on voting
110/301/DTR 110/320/RVC

Full information on the voting for the approval of this technical report can be found in the
report on voting indicated in the above table.

---------------------- Page: 5 ----------------------
– 4 – TR 62728 © IEC:2011(E)
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 6 ----------------------
TR 62728 © IEC:2011(E) – 5 –
INTRODUCTION
Traditionally each display technology (LCD, PDP and OLED) has developed its standards
independently. However because of the common applications for these technologies (e.g. TV),
the differences in the terms and measurement methods used by the different technologies are
causing confusion.
In 2007, TC110 decided to establish a study group to address these issues. This group
decided to initially address the differences in terminology. Experts representing each working
group (working group No.2: LCD, No.4: PDP, and No.5: OLED) agreed to work toward
harmonizing their terminology standards at the maintenance time.
Cases were found where a standard term differed from International Electrotechnical
Vocabulary (IEV), which is used by IEC for basic definitions.
In the case where agreement on harmonization could not be reached the study group decided
to explain the reason for the disagreement.
This technical report explains the differences of the definitions for 10 terms and the reasons
why they are different. It is expected that this report will help consumers to understand these
differences and to use these technical terms without confusion.

---------------------- Page: 7 ----------------------
– 6 – TR 62728 © IEC:2011(E)
DISPLAY TECHNOLOGIES –
LCD, PDP AND OLED –
OVERVIEW AND EXPLANATION OF
DIFFERENCES IN TERMINOLOGY



1 Scope
This technical report explains differences in definitions of the terms used in the flat panel
display field such as liquid crystal displays (LCD), plasma displays (PDP), and organic light
emitting diode displays (OLED). The definitions of technical terms are individually specified
in the different standards:
– Liquid crystal display: IEC 61747-1
– Plasma display: IEC 61988-1
– Organic light emitting diode display: IEC 62341-1-2.
This report explains the background and reasons for the differences, but does not introduce
new definitions or terms.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60050-845:1987, International Electrotechnical Vocabulary. Lighting
IEC 61747-1:1998, Liquid crystal and solid-state display devices – Part 1: Generic
specification
Amendment 1 (2003)
IEC 61988-1:2003, Plasma display p
...