iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 19739:2006/AC:2009

(Corrigendum)

Natural gas - Determination of sulfur compounds using gas chromatography (ISO 19739:2004/Cor 1:2009)

Natural gas - Determination of sulfur compounds using gas chromatography (ISO 19739:2004/Cor 1:2009)

ISO - Taking over of an ISO Technical Corrigendum

Erdgas - Bestimmung von Schwefelverbindungen mittels Gaschromatographie (ISO 19739:2004/Cor 1:2009)

Gaz naturel - Détermination des composés soufrés par chromatographie en phase gazeuse (ISO 19739:2004/Cor 1:2009)

Zemeljski plin - Določevanje žveplovih spojin s plinsko kromatografijo (ISO 19739:2004/Popravek 1:2009)

General Information

Status
Published
Publication Date
15-Jul-2009
ICS
75.060 - Natural gas
Technical Committee
NAD - Petroleum products, lubricants and related products
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
10-Jun-2009
Due Date
15-Aug-2009
Completion Date
16-Jul-2009
Ref Project
EN ISO 19739:2005/AC:2009 - Natural gas - Determination of sulfur compounds using gas chromatography (ISO 19739:2004/Cor 1:2009)

Relations

Corrects
SIST EN ISO 19739:2006 - Natural gas - Determination of sulfur compounds using gas chromatography (ISO 19739:2004)
Effective Date
01-Sep-2009

Buy Standard

EN ISO 19739:2006/AC:2009EN ISO 19739:2006/AC:2009
PreviousNext
Corrigendum
EN ISO 19739:2006/AC:2009
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Erdgas - Bestimmung von Schwefelverbindungen mittels Gaschromatographie (ISO 19739:2004/Cor 1:2009)Gaz naturel - Détermination des composés soufrés par chromatographie en phase gazeuse (ISO 19739:2004/Cor 1:2009)Natural gas - Determination of sulfur compounds using gas chromatography (ISO 19739:2004/Cor 1:2009)75.060Zemeljski plinNatural gasICS:Ta slovenski standard je istoveten z:EN ISO 19739:2005/AC:2009SIST EN ISO 19739:2006/AC:2009en01-september-2009SIST EN ISO 19739:2006/AC:2009SLOVENSKI
STANDARD



SIST EN ISO 19739:2006/AC:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 19739:2005/ACMay 2009Mai 2009Mai 2009ICS 75.060English versionVersion FrançaiseDeutsche FassungNatural gas - Determination of sulfur compounds using gaschromatography (ISO 19739:2004/Cor 1:2009)Gaz naturel - Détermination des composéssoufrés par chromatographie en phasegazeuse (ISO 19739:2004/Cor 1:2009)Erdgas - Bestimmung vonSchwefelverbindungen mittelsGaschromatographie (ISO 19739:2004/Cor1:2009)This corrigendum becomes effective on 27 May 2009 for incorporation in the three official languageversions of the EN.Ce corrigendum prendra effet le 27 mai 2009 pour incorporation dans les trois versions linguistiquesofficielles de la EN.Die Berichtigung tritt am 27.Mai 2009 zur Einarbeitung in die drei offiziellen Sprachfassungen der ENin Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde enti
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 6978-2:2005/AC:2016(Corrigendum)
Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy - Technical Corrigendum 2 (ISO 6978-2:2003/Cor 2:2006)
EN ISO 6978-2:2005/AC:2016

ISO corr

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16960:2014(Main)
Natural gas - Determination of sulfur compounds - Determination of total sulfur by oxidative microcoulometry method (ISO 16960:2014)
EN ISO 16960:2014

This International Standard specifies a method for the determination of total sulfur in the range from
1 mg/m3 to 200 mg/m3 in pipeline natural gas by oxidative microcoulometry. Natural gas with sulfur
contents above 200 mg/m3 can be analysed after dilution with a suitable sulfur-free solvent.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6974-5:2014(Main)
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons (ISO 6974-5:2014)
EN ISO 6974-5:2014

EN ISO 6974-5 describes a gas chromatographic method for the quantitative determination of the content of nitrogen, carbon dioxide and C1 to C5 hydrocarbons individually and a composite C6+ measurement, which represents all hydrocarbons of carbon number 6 and above in natural gas samples. It is applicable to the analysis of gases containing constituents within the working ranges given in Table 1.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15970:2014(Main)
Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008)
EN ISO 15970:2014

EN-ISO 15970 gives requirements and procedures for the measurement of the properties of natural gas that are used mainly for volume calculation and volume conversion: density at reference and at operating conditions, pressure, temperature and compression factor. Only those methods and instruments are considered that are suitable for field operation under the conditions of natural gas transmission and distribution, installed either in-line or on-line, and that do not involve the determination of the gas composition. This International Standard gives examples for currently used instruments that are available commercially and of interest to the natural gas industry. NOTE Attention is drawn to requirements for approval of national authorization agencies and to national legal regulations for the use of these devices for commercial or official trade purposes. The density at reference conditions (sometimes referred to as normal, standard or even base density) is required for conversion of volume data and can be used for other physical properties. Density at operating conditions is measured for mass-flow measurement and volume conversion using the observed line density and can be used for other physical properties. This International Standard covers density transducers based on vibrating elements, normally suitable for measuring ranges of 5 kg/m3 to 250 kg/m3. Pressure measurement deals with differential, gauge and absolute pressure transmitters. It considers both analogue and smart transmitters (i.e. microprocessor based instruments) and, if not specified otherwise, the corresponding paragraphs refer to differential, absolute and gauge pressure transmitters without distinction. Temperature measurements in natural gas are performed within the range of conditions under which transmission and distribution are normally carried out (253 K < T < 338 K). In this field of application, resistance thermometer detectors (RTD) are generally used. The compression factor (also known as the compressibility factor or the real gas factor and given the symbol Z) appears, in particular, in equations governing volumetric metering. Moreover, the conversion of volume at metering conditions to volume at defined reference conditions can properly proceed with an accurate knowledge of Z at both relevant pressure and relevant temperature conditions.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15971:2014(Main)
Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008)
EN ISO 15971:2014

EN-ISO 15971 concerns the measurement of calorific value of natural gas and natural gas substitutes by non-separative methods, i.e. methods that do not involve the determination of the gas composition nor calculation from it. It describes the principles of operation of a variety of instruments in use for this purpose, and provides guidelines for the selection, evaluation, performance assessment, installation and operation of these. Calorific values can be expressed on a mass basis, a molar basis or, more commonly, a volume basis. The working range for superior calorific value of natural gas, on the volume basis, is usually between 30 MJ/m3 and 45 MJ/m3 at standard reference conditions (see ISO 13443). The corresponding range for the Wobbe index is usually between 40 MJ/m3 and 60 MJ/m3. This International Standard neither endorses nor disputes the claims of any commercial manufacturer for the performance of an instrument. Its central thesis is that fitness-for-purpose in any particular application (defined in terms of a set of specific operational requirements) can be assessed only by means of a well-designed programme of experimental tests. Guidelines are provided for the proper content of these tests.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13734:2014(Main)
Natural gas - Organic components used as odorants - Requirements and test methods (ISO 13734:2013)
EN ISO 13734:2013

This International Standard specifies requirements and test methods for organic compounds suitable for odorization of natural gas and natural gas substitutes for public gas supply, hereafter referred to as odorants.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13686:2013(Main)
Natural gas - Quality designation (ISO 13686:2013)
EN ISO 13686:2013

This International Standard specifies the parameters required to describe finally processed and, where required, blended natural gas. Such gas is referred to subsequently in this text simply as "natural gas". The main text of this standard contains a list of these parameters, their units and references to measurement standards. Informative annexes give examples of typical values for these parameters, with the main emphasis on health and safety. In defining the parameters governing composition, physical properties and trace constituents, consideration has also been given to existing natural gases to ensure their continuing viability. The question of interchangeability is dealt with in annex A clause A.2.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10723:2013(Main)
Natural gas - Performance evaluation for analytical systems (ISO 10723:2012)
EN ISO 10723:2012

This International Standard specifies a method of determining whether an analytical system for natural gas analysis is fit for purpose. It can be used either a) to determine a range of gas compositions to which the method can be applied, using a specified calibration gas, while satisfying previously defined criteria for the maximum errors and uncertainties on the composition or property or both, or b) to evaluate the range of errors and uncertainties on the composition or property (calculable from composition) or both when analysing gases within a defined range of composition, using a specifiedIt is assumed that a) for evaluations of the first type above, the analytical requirement has been clearly and unambiguously defined, in terms of the range of acceptable uncertainty on the composition, and, where appropriate, the uncertainty in physical properties calculated from these measurements, b) for applications of the second type above, the analytical requirement has been clearly and unambiguously defined, in terms of the range of composition to be measured and, where appropriate, the range of properties which may be calculated from these measurements, c) the analytical and calibration procedures have been fully described, and d) the analytical system is intended to be applied to gases having compositions which vary over rangesIf the performance evaluation shows the system to be unsatisfactory in terms of the uncertainty on the component amount fraction or property, or shows limitations in the ranges of composition or property values measurable within the required uncertainty, then it is intended that the operating parameters, including a) the analytical requirement, b) the analytical procedure, c) the choice of equipment, d) the choice of calibration gas mixture, and e) the calculation procedure, be reviewed to assess where improvements can be obtained. Of these parameters, the choice of the calibration gas composition is likely to have the most significant influence. This International Standard is applicable to analytical systems which measure individual component amount fractions. For an application such as calorific value determination, the method will be typically gas chromatography, set up, as a minimum, for the measurement of nitrogen, carbon dioxide, individual hydrocarbons from C1 to C5 and a composite measurement representing all higher hydrocarbons of carbon number 6 and above. This allows for the calculation of calorific value and similar properties with acceptable accuracy. In addition, components such as H2S can be measured individually by specific measurement methods to which this evaluation approach can also be applied. normally found in gas transmission and distribution systems. Performance evaluation of an analytical system is intended to be performed following initial installation to ensure that errors associated with assumed response functions are fit for purpose. Thereafter, periodic performance evaluation is recommended, or whenever any critical component of the analytical system is adjusted or replaced. The appropriate interval between periodic performance evaluations will depend upon both how instrument responses vary with time and also how large an error may be tolerated. This first consideration is dependent upon instrument/operation; the second is dependent on the application. It is not appropriate, therefore, for this International Standard to offer specific recommendations on intervals between performance evaluations.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6974-1:2012/AC:2013(Main)
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition - Technical Corrigendum 1 (ISO 6974-1:2012/Cor 1:2012)
EN ISO 6974-1:2012/AC:2012

This part of ISO 6974 gives methods for calculating component mole fractions of natural gas and specifies the data processing requirements for determining component mole fractions. This part of ISO 6974 provides for both single and multiple operation methods and either multi-point calibration or a performance evaluation of
the analyser followed by single-point calibration. This part of ISO 6974 gives procedures for the calculation of the raw and processed (e.g. normalized) mole fractions, and their associated uncertainties, for all components. The procedures given in this part of ISO 6974 are applicable to the handling of data obtained from replicate or
single analyses of a natural gas sample.

  • Corrigendum
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6974-1:2012(Main)
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012)
EN ISO 6974-1:2012

This part of ISO 6974 gives methods for calculating component mole fractions of natural gas and specifies the data processing requirements for determining component mole fractions. This part of ISO 6974 provides for both single and multiple operation methods and either multi-point calibration or a performance evaluation of
the analyser followed by single-point calibration. This part of ISO 6974 gives procedures for the calculation of the raw and processed (e.g. normalized) mole fractions, and their associated uncertainties, for all components. The procedures given in this part of ISO 6974 are applicable to the handling of data obtained from replicate or
single analyses of a natural gas sample.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day