SIST EN ISO 7787-2:2001
(Main)Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters (ISO 7787-2:2000)
Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters (ISO 7787-2:2000)
Rotierende Dentalinstrumente - Fräser - Teil 2: Laborfräser aus Hartmetall (ISO 7787-2:2000)
Instruments rotatifs dentaires - Fraises techniques - Partie 2: Fraises techniques en carbure (ISO 7787-2:2000)
La présente partie de l'ISO 7787 spécifie les caractéristiques dimensionnelles et autres des 11 fraises techniques en carbure les plus communément utilisées en laboratoire dentaire.
NOTE :Les fraises techniques en acier sont définies dans l'ISO 7787-1; les fraises techniques en carbure pour machines de meulage sont définies dans l'ISO 7787-3; les fraises techniques miniatures en carbure pour laboratoire sont définies dans l'ISO 7787-4.
Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters (ISO 7787-2:2000)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 7787-2:2001
01-november-2001
1DGRPHãþD
SIST EN ISO 7787-2:2000
Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters (ISO 7787-
2:2000)
Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters (ISO 7787-
2:2000)
Rotierende Dentalinstrumente - Fräser - Teil 2: Laborfräser aus Hartmetall (ISO 7787-
2:2000)
Instruments rotatifs dentaires - Fraises techniques - Partie 2: Fraises techniques en
carbure (ISO 7787-2:2000)
Ta slovenski standard je istoveten z: EN ISO 7787-2:2000
ICS:
11.060.25 =RERWHKQLþQLLQVWUXPHQWL Dental instruments
SIST EN ISO 7787-2:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 7787-2:2001
---------------------- Page: 2 ----------------------
SIST EN ISO 7787-2:2001
EUROPEAN STANDARD
EN ISO 7787-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2000
ICS 11.060.20 Supersedes EN ISO 7787-2:1995
English version
Dental rotary instruments - Cutters - Part 2: Carbide laboratory
cutters (ISO 7787-2:2000)
Instruments rotatifs dentaires - Fraises techniques - Partie Rotierende Dentalinstrumente - Fräser - Teil 2: Laborfräser
2: Fraises techniques en carbure (ISO 7787-2:2000) aus Hartmetall (ISO 7787-2:2000)
This European Standard was approved by CEN on 15 December 2000.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2000 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7787-2:2000 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 7787-2:2001
Page 2
EN ISO 7787-2:2000
CORRECTED 2001-04-04
Foreword
The text of the International Standard ISO 7787-2:2000 has been prepared by Technical
Committee ISO/TC 106 "Dentistry" in collaboration with Technical Committee CEN/TC 55
"Dentistry", the secretariat of which is held by DIN.
This European Standard supersedes EN ISO 7787-2:1995.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by June 2001, and conflicting national
standards shall be withdrawn at the latest by June 2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United
Kingdom.
Endorsement notice
The text of the International Standard ISO 7787-2:2000 was approved by CEN as a European
Standard without any modification.
NOTE: Normative references to International Standards are listed in annex ZA (normative).
---------------------- Page: 4 ----------------------
SIST EN ISO 7787-2:2001
Page 3
EN ISO 7787-2:2000
Annex ZA (normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated by
(mod.), the relevant EN/HD applies.
Publication Year Title EN/HD Year
ISO 1797-1 1992 Dental rotary instruments – EN ISO 1797-1 1995
Shanks – Part 1: Shanks made of
metals
ISO 6360-1 1985 Dentistry – Dental rotary EN 26360-1 1990
instruments – Number coding
system – Part 1: General
characteristics
ISO 6360-2 1986 Dentistry – Dental rotary EN 26360-2 1991
instruments – Number coding
system – Part 2: Shape and
specific characteristics
ISO 8325 1985 Dentistry – Dental rotary EN 28325 1990
instruments – Test methods
---------------------- Page: 5 ----------------------
SIST EN ISO 7787-2:2001
---------------------- Page: 6 ----------------------
SIST EN ISO 7787-2:2001
INTERNATIONAL ISO
STANDARD 7787-2
Fourth edition
2000-12-15
Dental rotary instruments — Cutters —
Part 2:
Carbide laboratory cutters
Instruments rotatifs dentaires — Fraises techniques —
Partie 2: Fraises techniques en carbure
Reference number
ISO 7787-2:2000(E)
©
ISO 2000
---------------------- Page: 7 ----------------------
SIST EN ISO 7787-2:2001
ISO 7787-2:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2000 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 7787-2:2001
ISO 7787-2:2000(E)
Contents Page
Foreword.iv
Introduction.v
1 Scope .1
2 Normative references .1
3 Classification.1
4 Symbols .2
5 Requirements.2
5.1 Materials .2
5.2 Shapes .2
5.3 Dimensions and number of blades.2
5.4 Toothing.8
5.5 Run-out .8
6 Test procedures.8
6.1 Shapes .8
6.2 Dimensions and number of blades.8
6.3 Toothing.9
6.4 Run-out .9
7 Sampling and acceptance level (AQL) .9
8 Designation of toothing and number of blades.9
9 Marking on the instrument.10
10 Labelling on the package.10
11 Packaging.10
© ISO 2000 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 7787-2:2001
ISO 7787-2:2000(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.