iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60317-20:2001/A1:2002

(Amendment)

Specifications for particular types of winding wires -- Part 20: Solderable polyurethane enamelled round copper wire, class 155

Specifications for particular types of winding wires -- Part 20: Solderable polyurethane enamelled round copper wire, class 155

EN following parallel vote

eechnische Lieferbedingungen für bestimmte Typen von Wickeldrähten -- Teil 20: Runddrähte aus Kupfer, verzinnbar, lackisoliert mit Polyurethan, Klasse 155

Spécifications pour types particuliers de fils de bobinage -- Partie 20: Fil de section circulaire en cuivre émaillé avec polyuréthane brasable, classe 155

Specifications for particular types of winding wires – Part 20: Solderable polyurethane enamelled round copper wire, class 155

General Information

Status
Withdrawn
Publication Date
31-Mar-2002
Withdrawal Date
13-Nov-2016
ICS
29.060.10 - Wires
Technical Committee
I09 - Imaginarni 09
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
14-Nov-2016
Due Date
07-Dec-2016
Completion Date
14-Nov-2016
Ref Project
EN 60317-20:1995/A1:1998 - Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155

Relations

Revised
SIST EN 60317-20:2014 - Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155
Effective Date
06-May-2014
Replaced By
SIST EN 60317-20:2014 - Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155
Effective Date
29-Jan-2023
Replaced By
SIST EN 60317-20:2014 - Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155
Effective Date
07-Jun-2022
Amends
SIST EN 60317-20:2001 - Specifications for particular types of winding wires -- Part 20: Solderable polyurethane enamelled round copper wire, class 155
Effective Date
21-Sep-2010
Replaced By
SIST EN 60317-20:2014 - Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155
Effective Date
21-Feb-2012
Amends
SIST EN 60317-20:2001 - Specifications for particular types of winding wires -- Part 20: Solderable polyurethane enamelled round copper wire, class 155
Effective Date
29-Jan-2023
Amends
SIST EN 60317-20:2001 - Specifications for particular types of winding wires -- Part 20: Solderable polyurethane enamelled round copper wire, class 155
Effective Date
07-Jun-2022

Buy Standard

EN 60317-20:2001/A1:2002EN 60317-20:2001/A1:2002
PreviousNext
Amendment
EN 60317-20:2001/A1:2002
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60317-20:2001/A1:2002
01-april-2002
Specifications for particular types of winding wires – Part 20: Solderable
polyurethane enamelled round copper wire, class 155
Specifications for particular types of winding wires -- Part 20: Solderable polyurethane
enamelled round copper wire, class 155
eechnische Lieferbedingungen für bestimmte Typen von Wickeldrähten -- Teil 20:
Runddrähte aus Kupfer, verzinnbar, lackisoliert mit Polyurethan, Klasse 155
Spécifications pour types particuliers de fils de bobinage -- Partie 20: Fil de section
circulaire en cuivre émaillé avec polyuréthane brasable, classe 155
Ta slovenski standard je istoveten z: EN 60317-20:1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60317-84:2021(Main)
Specifications for particular types of winding wires - Part 84: Polyesterimide enamelled round copper wire, class 200 (IEC 60317-84:2021)
EN IEC 60317-84:2021

This part of IEC 60317 specifies the requirements of enamelled round copper winding wires of
class 200 with a sole coating based on polyesterimide resin, which may be modified providing
it retains the chemical identity of the original resin and meets all specified wire requirements.
NOTE A modified resin is a resin that has undergone a chemical change or contains one or more additives to
enhance certain performance or application characteristics.
The range of nominal conductor diameters covered by this document is as follows:
– Grade 1: 0,018 mm up to and including 3,150 mm;
– Grade 2: 0,020 mm up to and including 5,000 mm;
– Grade 3: 0,0250 mm up to and including 1,600 mm.
The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1:2013.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60851-1:2021(Main)
Winding wires - Test methods - Part 1: General (IEC 60851-1:2021)
EN IEC 60851-1:2021

This part of IEC 60851 specifies the general notes on methods of test for winding wires. It also
gives the definitions for terms used in IEC 60851 (all parts). A survey of the contents of
IEC 60851-2 to IEC 60851-6 is given in Annex A.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60172:2021(Main)
Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires (IEC 60172:2020)
EN IEC 60172:2021

IEC 60172:2020  which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60172:2020 specifies, in accordance with the provisions of IEC 60216-1, a method for evaluating the temperature index of enamelled wire, varnished or unvarnished with an impregnating agent, and of tape wrapped round and rectangular wire, in air at atmospheric pressure by periodically monitoring changes in response to AC proof voltage tests. This procedure does not apply to fibre-insulated wire or wire covered with tapes containing inorganic fibres. NOTE The data obtained according to this test procedure provide the designer and development engineer with information for the selection of winding wire for further evaluation of insulation systems and equipment tests. This fifth edition cancels and replaces the fourth edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- revision of 3.1, definition of thermal index;
- revision of 3.3, time to failure;
- revisions to 5.1.1 for clarity and to reduce the range wire size range to which the test applies;
- revisions to 5.1.2 for tape wrapped round and enamelled or tape wrapped rectangular wire for clarity;
- revision to Clause 9 to add the correlation coefficient, r to the report.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60317-25:2020(Main)
Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 (IEC 60317-25:2020)
EN IEC 60317-25:2020

This part of IEC 60317 specifies the requirements of enamelled round aluminium winding
wires of class 200 with a dual coating. The underlying coating is based on polyester or
polyesterimide resin, which can be modified provided it retains the chemical identity of the
original resin and meets all specified wire requirements. The superimposed coating is based
on polyamide-imide resin.
NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to
enhance certain performance or application characteristics.
The range of nominal conductor diameters covered by this document is:
– Grade 1: 0,250 mm up to and including 3,150 mm;
– Grade 2: 0,250 mm up to and including 5,000 mm.
The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-3:2008 and
IEC 60317-0-3:2008/AMD1:2013.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60317-17:2020(Main)
Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 (IEC 60317-17:2020)
EN IEC 60317-17:2020

This part of IEC 60317 specifies the requirements of enamelled rectangular copper winding
wires of class 105 with a sole coating based on polyvinyl acetal resin, which can be modified
provided it retains the chemical identity of the original resin and meets all specified wire
requirements.
NOTE 1 A modified resin is a resin that has undergone a chemical change, or contains one or more additives to
enhance certain performance or application characteristics.
NOTE 2 Polyvinyl acetate is a general name for a family of thermoplastic vinyl resins produced by the
condensation of polyvinyl alcohol with an aldehyde. Examples are polyvinyl acetal, polyvinyl formal and polyvinyl
butyral.
The range of nominal conductor dimensions covered by this document is:
– width: min. 2,0 mm max. 31,5 mm;
– thickness: min. 0,80 mm max. 10,00 mm.
Wires of grade 1 and grade 2 are included in this specification and apply to the complete
range of conductors.
The specified combinations of width and thickness as well as the specified ratio of
width/thickness are given in IEC 60317-0-2.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60317-62:2020(Main)
Specifications for particular types of winding wires - Part 62: Polyester glass-fibre wound, silicone resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 (IEC 60317-62:2020)
EN IEC 60317-62:2020

This part of IEC 60317 specifies the requirements of polyester glass-fibre wound, silicone
resin or varnish impregnated bare, grade 1 or grade 2 enamelled rectangular copper winding
wires, temperature index 200. The impregnating agent is a silicone containing resin or
varnish.
The range of nominal conductor dimensions covered by this document is:
– width: min. 2,0 mm max. 16,0 mm;
– thickness: min. 0,80 mm max. 5,60 mm.
NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be
established. Consequently, a class based on the requirements for temperature index and heat shock temperature
cannot be specified.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60317-27-2:2020(Main)
Specifications for particular types of winding wires - Part 27-2: Paper tape covered round aluminum wire (IEC 60317-27-2:2020)
EN IEC 60317-27-2:2020

This part of IEC 60317 specifies the requirements of paper tape covered round aluminium
winding wires. This covering consists of two or more layers of paper tape and is primarily
intended for winding coils for oil immersed transformers.
The range of nominal conductor diameters covered by this document is:
– 0,500 mm up to and including 5,000 mm.
The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-3:2008 and
IEC 60317-0-3:2008/AMD1:2013.
The paper tapes included in this document are restricted to those covered in IEC 60554-1 and
IEC 60554-3-5.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60317-60-1:2020(Main)
Specifications for particular types of winding wires - Part 60-1: Polyester glass-fibre wound fused, unvarnished, bare or enamelled rectangular copper wire, temperature index 155 (IEC 60317-60-1:2020)
EN IEC 60317-60-1:2020

This part of IEC 60317 specifies the requirements of polyester glass-fibre wound fused,
unvarnished, bare or grade 1 or grade 2 enamelled rectangular copper winding wires,
temperature index 155.
NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be
established. Consequently, a class based on the requirements for temperature index and heat shock temperature
cannot be specified.
The range of nominal conductor dimensions covered by this document is:
– width: min. 2,0 mm max. 16,0 mm;
– thickness: min. 0,80 mm max. 5,60 mm.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60317-18:2020(Main)
Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120 (IEC 60317-18:2020)
EN IEC 60317-18:2020

This part of IEC 60317 specifies the requirements of enamelled rectangular copper winding
wires of class 120 with a sole coating based on polyvinyl acetal or polyvinyl formal resin,
which can be modified provided it retains the chemical identity of the original resin and meets
all specified wire requirements
NOTE 1 A modified resin is a resin that has undergone a chemical change, or contains one or more additives to
enhance certain performance or application characteristics.
NOTE 2 Polyvinyl acetal is a general name for a family of thermoplastic vinyl resins produced by the
condensation of polyvinyl alcohol with an aldehyde. Examples are polyvinyl acetal, polyvinyl formal and polyvinyl
butyral.
The range of nominal conductor dimensions covered by this document is:
– width: min. 2,0 mm max. 31,5 mm;
– thickness: min. 0,80 mm max. 10,0 mm.
Wires of grade 1 and grade 2 are included in this specification and apply to the complete
range of conductors.
The specified combinations of width and thickness as well as the specified ratio
width/thickness are given in IEC 60317-0-2.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60317-27-1:2020(Main)
Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire (IEC 60317-27-1:2020)
EN IEC 60317-27-1:2020

This part of IEC 60317 specifies the requirements of paper tape covered round copper winding
wires. This covering consists of two or more layers of paper tape and is primarily intended for
winding coils for oil immersed transformers.
The range of nominal conductor diameters covered by this document is:
– 0,500 mm up to and including 5,000 mm.
The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1:2013.
The paper tapes included in this document are restricted to those specified in IEC 60554-1 and
IEC 60554-3-5.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day