SIST EN 3274:2011

Aerospace series - Pipe coupling 8°30' - Thread end - Geometric configuration

This standard specifies the characteristics of the thread end for 8°30' pipe couplings, nominal pressure up to 28 000 kPa, for aerospace applications.

Luft- und Raumfahrt - Rohrverschraubung 8°30' - Gewindeende - Konstruktionsblatt

Diese Norm legt die Merkmale der Gewindeenden von Rohrverschraubungen 8°30', Nenndruck bis zu 28 000 kPa, zur Anwendung in der Luft- und Raumfahrt fest.

Série aérospatiale - Système de raccordement 8°30' - Extrémité de filetage - Configuration géométrique

Aeronavtika - Cevni priključek 8°30' - Konec navoja - Geometrijski načrt

Ta standard določa značilnosti konca navoja za 8°30' za cevne priključke nominalnega tlaka do 28 000 kPa za uporabo v aeronavtiki.

General Information

• Status: Published
• Publication Date: 12-Apr-2011
• ICS: 49.030.10 - Screw threads
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 31-Mar-2011
• Due Date: 05-Jun-2011
• Completion Date: 13-Apr-2011
• Ref Project: EN 3274:2010 - Aerospace series - Pipe coupling 8°30' - Thread end - Geometric configuration

Relations

• Replaces: SIST EN 3274:2004 - Aerospace series - Pipe coupling 8°30' - Thread end - Geometric configuration
• Effective Date: 01-May-2011
• Replaces: SIST EN 3274:2004 - Aerospace series - Pipe coupling 8°30' - Thread end - Geometric configuration
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Rohrverschraubung 8°30' - Gewindeende - KonstruktionsblattSérie aérospatiale - Système de raccordement 8°30' - Extrémité de filetage - Configuration géométriqueAerospace series - Pipe coupling 8°30' - Thread end - Geometric configuration49.030.10NavojiScrew threadsICS:Ta slovenski standard je istoveten z:EN 3274:2010SIST EN 3274:2011en,de01-maj-2011SIST EN 3274:2011SLOVENSKI
STANDARDSIST EN 3274:20041DGRPHãþD



SIST EN 3274:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3274
October 2010 ICS 49.080 Supersedes EN 3274:2001English Version
Aerospace series - Pipe coupling 8°30' - Thread end - Geometric configuration
Série aérospatiale - Système de raccordement 8°30' - Extrémité de filetage - Configuration géométrique
Luft- und Raumfahrt - Rohrverschraubung 8°30' - Gewindeende - Konstruktionsblatt This European Standard was approved by CEN on 30 July 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3274:2010: ESIST EN 3274:2011



EN 3274:2010 (E) 2 Foreword This document (EN 3274:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the latest by April 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 3274:2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 3274:2011



EN 3274:2010 (E) 3 Contents Page Foreword . 21Scope . 42N
...