SIST EN 4622:2010
(Main)Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2 coated
Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2 coated
This standard specifies the characteristics of self-locking, MJ thread inserts, self-broaching keys, in FE-PA2601, MoS2 coated, for aerospace applications. Classification: 1 100 MPa/ 315 °C).
Luft- und Raumfahrt - Gewindeeinsätze, MJ-Gewinden, selbstsichernd, mit selbsträumenden Stiften, aus hochwarmfestem Stahl FE-PA2601 (A286), MoS2 beschichtet
Diese Norm legt die Eigenschaften von selbstsichernden Gewindeeinsätzen aus FE-PA2601,
MoS2-beschichtet, MJ-Gewinde und mit selbsträumenden Stiften für Anwendungen in der Luft- und Raumfahrt
fest.
Klasse: 1 100 MPa1)/315 °C2).
Série aérospatiale - Douilles filetées, à filetage MJ, à freinage interne, à clavettes auto-brochantes, en acier résistant à chaud FEPA2601 (A286), revêtues MoS2
Aeronavtika - Vložki, navoj MJ, samozapiralni, s samozagozdnim ključem, iz toplotnoodpornega jekla FE-PA2601 (A286), mazani z MoS2
Ta standard opredeljuje značilnosti samozapiralnih vložkov z MJ navojem, s samozagozdnimi ključi, iz FE-PA2601, mazanih z MoS2, za uporabo v aeronavtiki. Klasifikacija: 1100 MPa/315 °C.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Gewindeeinsätze, MJ-Gewinden, selbstsichernd, mit selbsträumenden Stiften, aus hochwarmfestem Stahl FE-PA2601 (A286), MoS2 beschichtetSérie aérospatiale - Douilles filetées, à filetage MJ, à freinage interne, à clavettes auto-brochantes, en acier résistant à chaud FEPA2601 (A286), revêtues MoS2Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2 coated49.030.10NavojiScrew threadsICS:Ta slovenski standard je istoveten z:EN 4622:2010SIST EN 4622:2010en01-julij-2010SIST EN 4622:2010SLOVENSKI
STANDARD
SIST EN 4622:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4622
April 2010 ICS 49.030.30 English Version
Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2coated
Série aérospatiale - Douilles filetées, à filetage MJ, à freinage interne, à clavettes auto-brochantes, en acier résistant à chaud FE-PA2601 (A286), revêtues MoS2
Luft- und Raumfahrt - Gewindeeinsätze, MJ-Gewinden, selbstsichernd, mit selbsträumenden Stiften, aus hochwarmfestem Stahl FE-PA2601 (A286), MoS2 beschichtet This European Standard was approved by CEN on 16 January 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4622:2010: ESIST EN 4622:2010
EN 4622:2010 (E) 2 Contents Page Foreword .3Introduction .41Scope .52Normative references .53Required characteristics .53.1Configuration – Dimensions – Tolerances – Masses .53.2Material .63.3Surface treatment .64Insert definition .64.1Normal size insert .74.2First repair size insert .74.3Second repair size insert .84.4Special thread dimensions .85Designation .96Marking and identification .97Technical specification .9 SIST EN 4622:2010
EN 4622:2010 (E) 3 Foreword This document (EN 4622:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2010, and conflicting national standards shall be withdrawn at the latest by October 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.