SIST ES 202 504-10 V1.1.1:2008
Open Service Access (OSA) - Parlay X Web Services - Part 10: Call Handling (Parlay X 3)
- Abstract
New edition of ParlayX specification based on requirements in EG 201 988-4, corresponding to 3GPP TS 29.199 Rel-7.The present document is part 10 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the OSA APIs.
The present document specifies the Call Handling Web Service. The following are defined here:
• Name spaces.
• Sequence diagrams.
• Data definitions.
• Interface specification plus detailed method descriptions.
• Fault definitions.
• Service Policies.
• WSDL Description of the interfaces.
- Status
- Published
- Publication Date
- 02-Jul-2008
- Technical Committee
- SPN - Services and Protocols for Networks
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 12-Jun-2008
- Due Date
- 17-Aug-2008
- Completion Date
- 03-Jul-2008
Buy Documents
ETSI ES 202 504-10 V1.1.1 (2008-02) - Open Service Access (OSA); Parlay X Web Services; Part 10: Call Handling (Parlay X 3);
ETSI ES 202 504-10 V1.1.1 (2008-05) - Open Service Access (OSA); Parlay X Web Services; Part 10: Call Handling (Parlay X 3);
SIST ES 202 504-10 V1.1.1:2008 is an ETSI standard for Open Service Access (OSA) Parlay X Web Services, Part 10: Call Handling. It specifies the Call Handling Web Service that lets applications define how calls are accepted, blocked, forwarded, or handed to voice interaction. It is written for application developers and service platforms that expose network functionality through OSA APIs.
What does SIST ES 202 504-10 V1.1.1:2008 specify?
SIST ES 202 504-10 V1.1.1:2008 is part 10 of the Stage 3 Parlay X 3 Web Services specification for OSA. It focuses on the call handling function for a specific number and gives the service interface needed to set, read, and clear call-handling rules.
The document is organized around the service description, the XML data model, the web service interface, faults, and service policies. It also includes a sequence diagram showing how an application sets up rules, queries them, and clears them.
| Annex | What it covers |
|---|---|
| Annex A | Normative WSDL for Call Handling |
| Annex B | Bibliography |
What are the key requirements of SIST ES 202 504-10 V1.1.1:2008?
The standard defines a rule-based call handling service. In practice, that means an application can upload a rule set for an address and the service applies those rules automatically when a call arrives, without further application interaction.
How call processing works
Clause 4 defines the processing order for call handling. The service checks call accepting, then call blocking, then conditional forwarding, then unconditional forwarding, then play audio, and finally allows the call to continue to the original destination if no earlier rule applies.
This order matters because only one action is taken per call, and processing stops as soon as an action is triggered. If no rules are set for a step, that step is skipped.
What the interface operations do
Clause 8 defines four operations on the CallHandling interface:
setRulessets rules for one address and replaces any existing rules.setRulesForGroupsets rules for multiple addresses, including groups.getRulesreturns the rules currently applied to one address.clearRulesremoves rules for the given addresses.
For users of the service, this means the API supports both single-address administration and bulk administration. The document also states that setRules and getRules do not accept group addresses, while setRulesForGroup and clearRules may use groups subject to the stated policy limits.
What the address and rule model looks like
Clause 7 defines the main data structures used by the service. CallHandlingRules carries the accept list, block list, conditional forwarding list, unconditional forwarding information, and voice interaction content. ConditionalForward and UnconditionalForward describe forwarding destinations and fallback destinations for busy or unanswered calls.
This matters because implementers need to map service inputs to the exact rule objects defined by the standard. The VoiceInteraction union lets the caller choose text, VoiceXML, or audio content for interactive handling.
What faults and policies matter
Clause 8 reuses faults from ES 202 504-1, including service errors, invalid input, and policy errors. Clause 9 states that no new faults are defined for this service.
Clause 10 defines service policies such as VoiceMailAvailable, TextToSpeechAvailable, AudioContentAvailable, VoiceXmlAvailable, AudioFormatsSupported, GroupSupport, and NestedGroupSupport. In practice, these policy flags tell a client what the service can accept before it sends a request.
What terms does SIST ES 202 504-10 V1.1.1:2008 define?
CallHandlingRules- the rule set that combines accept, block, forwarding, and voice interaction settings for one address.ConditionalForward- forwarding information for a specific calling number, including fallback addresses for busy or unanswered cases.UnconditionalForward- forwarding information used regardless of the caller.VoiceInteraction- the union that selects text, VoiceXML, or audio content for interactive call handling.SetRulesResult- the per-address result returned bysetRulesForGroup, with success information and any error.Service policies- capability flags that describe what the service supports, such as groups, nested groups, audio, or text-to-speech.Open Service Access (OSA)- the architecture that exposes network functionality through standardized APIs.
Who uses SIST ES 202 504-10 V1.1.1:2008?
Application developers use it to build services that control call treatment from software. Network and platform implementers use it when exposing call control functions through an OSA/Parlay X interface.
It is also relevant to telecom service providers, integration teams, and test or quality engineers who need to verify rule handling, address formats, group behavior, and policy limits in a call management service.
What changed in SIST ES 202 504-10 V1.1.1:2008 from the previous edition?
The foreword states that SIST ES 202 504-10 V1.1.1:2008 is equivalent to 3GPP TS 29.199-10 V7.0.2 (Release 7).
Which standards are used with SIST ES 202 504-10 V1.1.1:2008?
Clause 2 names two normative references:
- W3C Recommendation “XML Schema Part 2: Datatypes” - used for the XML data types referenced by the service schema.
- ETSI ES 202 504-1, “Open Service Access (OSA); Parlay X Web Services; Part 1: Common (Parlay X 3)” - provides the shared definitions, abbreviations, faults, and policy framework used by this part.
What does the SIST ES 202 504-10 V1.1.1:2008 document contain?
Clause 6 provides a sequence diagram for setting up call handling, querying rules, and clearing rules. Clause 7 gives the XML Schema data type definitions for forwarding, voice interaction, rule sets, and results.
Clause 8 contains the web service interface definition, including request and response message names, referenced faults, and the behavior of each operation. Clause 10 lists the service policy attributes that describe service capabilities. Annex A supplies the normative WSDL representation, and Annex B gives the bibliography.
Buy Documents
ETSI ES 202 504-10 V1.1.1 (2008-02) - Open Service Access (OSA); Parlay X Web Services; Part 10: Call Handling (Parlay X 3);
ETSI ES 202 504-10 V1.1.1 (2008-05) - Open Service Access (OSA); Parlay X Web Services; Part 10: Call Handling (Parlay X 3);
Get Certified
Connect with accredited certification bodies for this standard

BSI Group
BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.

NYCE
Mexican standards and certification body.
Sponsored listings
Frequently Asked Questions
SIST ES 202 504-10 V1.1.1:2008 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Open Service Access (OSA) - Parlay X Web Services - Part 10: Call Handling (Parlay X 3)". This standard covers: New edition of ParlayX specification based on requirements in EG 201 988-4, corresponding to 3GPP TS 29.199 Rel-7.The present document is part 10 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA). The OSA specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the OSA APIs. The present document specifies the Call Handling Web Service. The following are defined here: • Name spaces. • Sequence diagrams. • Data definitions. • Interface specification plus detailed method descriptions. • Fault definitions. • Service Policies. • WSDL Description of the interfaces.
New edition of ParlayX specification based on requirements in EG 201 988-4, corresponding to 3GPP TS 29.199 Rel-7.The present document is part 10 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA). The OSA specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the OSA APIs. The present document specifies the Call Handling Web Service. The following are defined here: • Name spaces. • Sequence diagrams. • Data definitions. • Interface specification plus detailed method descriptions. • Fault definitions. • Service Policies. • WSDL Description of the interfaces.
SIST ES 202 504-10 V1.1.1:2008 is classified under the following ICS (International Classification for Standards) categories: 35.100.01 - Open systems interconnection in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST ES 202 504-10 V1.1.1:2008 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
Final draft ETSI ES 202 504-10 V1.1.1 (2008-02)
ETSI Standard
Open Service Access (OSA);
Parlay X Web Services;
Part 10: Call Handling
(Parlay X 3)
�
2 Final draft ETSI ES 202 504-10 V1.1.1 (2008-02)
Reference
DES/TISPAN-01034-10-OSA
Keywords
API, OSA, service
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
© The Parlay Group 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 Final draft ETSI ES 202 504-10 V1.1.1 (2008-02)
Contents
Intellectual Property Rights.4
Foreword.4
1 Scope.5
2 References.5
2.1 Normative references.6
3 Definitions and abbreviations.6
3.1 Definitions.6
3.2 Abbreviations.6
4 Detailed service description .6
5 Namespaces.7
6 Sequence diagrams.8
6.1 Setup call handling, query and clear rules.8
7 XML Schema data type definition .9
7.1 ConditionalForward structure.9
7.2 UnconditionalForward structure.9
7.3 InteractionContent enumeration.9
7.4 TextInteraction structure.9
7.5 VoiceInteraction union.9
7.6 CallHandlingRules structure.10
7.7 SetRulesResult structure.10
8 Web Service interface definition.10
8.1 Interface: CallHandling.10
8.1.1 Operation: setRules.10
8.1.1.1 Input message: setRulesRequest .10
8.1.1.2 Output message: setRulesResponse.10
8.1.1.3 Referenced faults.11
8.1.2 Operation: setRulesForGroup.11
8.1.2.1 Input message: setRulesForGroupRequest.11
8.1.2.2 Output message: setRulesForGroupResponse.11
8.1.2.3 Referenced faults.11
8.1.3 Operation: getRules.11
8.1.3.1 Input message: getRulesRequest.12
8.1.3.2 Output message: getRulesResponse.12
8.1.3.3 Referenced faults.12
8.1.4 Operation: clearRules.12
8.1.4.1 Input message: clearRulesRequest.12
8.1.4.2 Output message: clearRulesResponse.12
8.1.4.3 Referenced faults.12
9 Fault definitions.13
10 Service policies .13
Annex A (normative): WSDL for Call Handling .14
Annex B (informative): Bibliography.15
History .16
ETSI
4 Final draft ETSI ES 202 504-10 V1.1.1 (2008-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN), and is now submitted for the ETSI standards
Membership Approval Procedure.
The present document is part 10 of a multi-part deliverable covering Open Service Access (OSA); Parlay X
Web Services, as identified below:
Part 1: "Common";
Part 2: "Third Party Call";
Part 3: "Call Notification";
Part 4: "Short Messaging";
Part 5: "Multimedia Messaging";
Part 6: "Payment";
Part 7: "Account Management";
Part 8: "Terminal Status";
Part 9: "Terminal Location";
Part 10: "Call Handling";
Part 11: "Audio Call";
Part 12: "Multimedia Conference";
Part 13: "Address List Management";
Part 14: "Presence";
Part 15: "Message Broadcast";
Part 16: "Geocoding";
Part 17: "Application-driven Quality of Service (QoS)";
Part 18: "Device Capabilities and Configuration";
Part 19: "Multimedia Streaming Control";
Part 20: "Multimedia Multicast Session Management".
ETSI
5 Final draft ETSI ES 202 504-10 V1.1.1 (2008-02)
The present document has been defined jointly between ETSI, The Parlay Group (http://www.parlay.org) and the 3GPP.
The present document forms part of the Parlay X 3.0 set of specifications.
The present document is equivalent to 3GPP TS 29.199-10 V7.0.2 (Release 7).
1 Scope
The present document is part 10 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality
through an open standardized interface, i.e. the OSA APIs.
The present document specifies the Call Handling Web Service. The following are defined here:
• Name spaces.
• Sequence diagrams.
• Data definitions.
• Interface specification plus detailed method descriptions.
• Fault definitions.
• Service Policies.
• WSDL Description of the interfaces.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
ETSI
6 Final draft ETSI ES 202 504-10 V1.1.1 (2008-0
...
ETSI Standard
Open Service Access (OSA);
Parlay X Web Services;
Part 10: Call Handling
(Parlay X 3)
�
2 ETSI ES 202 504-10 V1.1.1 (2008-05)
Reference
DES/TISPAN-01034-10-OSA
Keywords
API, OSA, service
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
© The Parlay Group 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI ES 202 504-10 V1.1.1 (2008-05)
Contents
Intellectual Property Rights.4
Foreword.4
1 Scope.6
2 References.6
2.1 Normative references.6
3 Definitions and abbreviations.7
3.1 Definitions.7
3.2 Abbreviations.7
4 Detailed service description .7
5 Namespaces.8
6 Sequence diagrams.9
6.1 Setup call handling, query and clear rules.9
7 XML Schema data type definition .10
7.1 ConditionalForward structure.10
7.2 UnconditionalForward structure.10
7.3 InteractionContent enumeration.10
7.4 TextInteraction structure.10
7.5 VoiceInteraction union.10
7.6 CallHandlingRules structure.11
7.7 SetRulesResult structure.11
8 Web Service interface definition.11
8.1 Interface: CallHandling.11
8.1.1 Operation: setRules.11
8.1.1.1 Input message: setRulesRequest .11
8.1.1.2 Output message: setRulesResponse.11
8.1.1.3 Referenced faults.12
8.1.2 Operation: setRulesForGroup.12
8.1.2.1 Input message: setRulesForGroupRequest.12
8.1.2.2 Output message: setRulesForGroupResponse.12
8.1.2.3 Referenced faults.12
8.1.3 Operation: getRules.12
8.1.3.1 Input message: getRulesRequest.13
8.1.3.2 Output message: getRulesResponse.13
8.1.3.3 Referenced faults.13
8.1.4 Operation: clearRules.13
8.1.4.1 Input message: clearRulesRequest.13
8.1.4.2 Output message: clearRulesResponse.13
8.1.4.3 Referenced faults.13
9 Fault definitions.14
10 Service policies .14
Annex A (normative): WSDL for Call Handling .15
Annex B (informative): Bibliography.16
History .17
ETSI
4 ETSI ES 202 504-10 V1.1.1 (2008-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN).
The present document is part 10 of a multi-part deliverable covering Open Service Access (OSA); Parlay X
Web Services, as identified below:
Part 1: "Common";
Part 2: "Third Party Call";
Part 3: "Call Notification";
Part 4: "Short Messaging";
Part 5: "Multimedia Messaging";
Part 6: "Payment";
Part 7: "Account Management";
Part 8: "Terminal Status";
Part 9: "Terminal Location";
Part 10: "Call Handling";
Part 11: "Audio Call";
Part 12: "Multimedia Conference";
Part 13: "Address List Management";
Part 14: "Presence";
Part 15: "Message Broadcast";
Part 16: "Geocoding";
Part 17: "Application-driven Quality of Service (QoS)";
Part 18: "Device Capabilities and Configuration";
Part 19: "Multimedia Streaming Control";
Part 20: "Multimedia Multicast Session Management".
ETSI
5 ETSI ES 202 504-10 V1.1.1 (2008-05)
The present document has been defined jointly between ETSI, The Parlay Group (http://www.parlay.org) and the 3GPP.
The present document forms part of the Parlay X 3.0 set of specifications.
The present document is equivalent to 3GPP TS 29.199-10 V7.0.2 (Release 7).
ETSI
6 ETSI ES 202 504-10 V1.1.1 (2008-05)
1 Scope
The present document is part 10 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality
through an open standardized interface, i.e. the OSA APIs.
The present document specifies the Call Handling Web Service. The following are defined here:
• Name spaces.
• Sequence diagrams.
• Data definitions.
• Interface specification plus detailed method descriptions.
• Fault definitions.
• Service Policies.
• WSDL Description of the interfaces.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensabl
...
SLOVENSKI STANDARD
01-september-2008
Odprti dostop do storitve (OSA) - Spletne storitve Parlay X - 10. del: Ravnanje s
klicem (Parlay X 3)
Open Service Access (OSA) - Parlay X Web Services - Part 10: Call Handling (Parlay X
3)
Ta slovenski standard je istoveten z: ES 202 504-10 Version 1.1.1
ICS:
35.100.01 Medsebojno povezovanje Open systems
odprtih sistemov na splošno interconnection in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
ETSI Standard
Open Service Access (OSA);
Parlay X Web Services;
Part 10: Call Handling
(Parlay X 3)
�
2 ETSI ES 202 504-10 V1.1.1 (2008-05)
Reference
DES/TISPAN-01034-10-OSA
Keywords
API, OSA, service
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
© The Parlay Group 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI ES 202 504-10 V1.1.1 (2008-05)
Contents
Intellectual Property Rights.4
Foreword.4
1 Scope.6
2 References.6
2.1 Normative references.6
3 Definitions and abbreviations.7
3.1 Definitions.7
3.2 Abbreviations.7
4 Detailed service description .7
5 Namespaces.8
6 Sequence diagrams.9
6.1 Setup call handling, query and clear rules.9
7 XML Schema data type definition .10
7.1 ConditionalForward structure.10
7.2 UnconditionalForward structure.10
7.3 InteractionContent enumeration.10
7.4 TextInteraction structure.10
7.5 VoiceInteraction union.10
7.6 CallHandlingRules structure.11
7.7 SetRulesResult structure.11
8 Web Service interface definition.11
8.1 Interface: CallHandling.11
8.1.1 Operation: setRules.11
8.1.1.1 Input message: setRulesRequest .11
8.1.1.2 Output message: setRulesResponse.11
8.1.1.3 Referenced faults.12
8.1.2 Operation: setRulesForGroup.12
8.1.2.1 Input message: setRulesForGroupRequest.12
8.1.2.2 Output message: setRulesForGroupResponse.12
8.1.2.3 Referenced faults.12
8.1.3 Operation: getRules.12
8.1.3.1 Input message: getRulesRequest.13
8.1.3.2 Output message: getRulesResponse.13
8.1.3.3 Referenced faults.13
8.1.4 Operation: clearRules.13
8.1.4.1 Input message: clearRulesRequest.13
8.1.4.2 Output message: clearRulesResponse.13
8.1.4.3 Referenced faults.13
9 Fault definitions.14
10 Service policies .14
Annex A (normative): WSDL for Call Handling .15
Annex B (informative): Bibliography.16
History .17
ETSI
4 ETSI ES 202 504-10 V1.1.1 (2008-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN).
The present document is part 10 of a multi-part deliverable covering Open Service Access (OSA); Parlay X
Web Services, as identified below:
Part 1: "Common";
Part 2: "Third Party Call";
Part 3: "Call Notification";
Part 4: "Short Messaging";
Part 5: "Multimedia Messaging";
Part 6: "Payment";
Part 7: "Account Management";
Part 8: "Terminal Status";
Part 9: "Terminal Location";
Part 10: "Call Handling";
Part 11: "Audio Call";
Part 12: "Multimedia Conference";
Part 13: "Address List Management";
Part 14: "Presence";
Part 15: "Message Broadcast";
Part 16: "Geocoding";
Part 17: "Application-driven Quality of Service (QoS)";
Part 18: "Device Capabilities and Configuration";
Part 19: "Multimedia Streaming Control";
Part 20: "Multimedia Multicast Session Management".
ETSI
5 ETSI ES 202 504-10 V1.1.1 (2008-05)
The present document has been defined jointly between ETSI, The Parlay Group (http://www.parlay.org) and the 3GPP.
The present document forms part of the Parlay X 3.0 set of specifications.
The present document is equivalent to 3GPP TS 29.199-10 V7.0.2 (Release 7).
ETSI
6 ETSI ES 202 504-10 V1.1.1 (2008-05)
1 Scope
The present document is part 10 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality
through an open standardized interface, i.e. the OSA APIs.
The present document specifies the Call Handling Web Service. The following are defined here:
• Name spaces.
• Sequence diagrams.
• Data definitions.
• Interface specification plus detailed method descriptions.
• Fault definitions.
• Service Policies.
• WSDL Description of the interfaces.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punc
...











