iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

kSIST FprEN 4869-001:2024

(Main)

Aerospace series - Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities - Part 001: Technical specification

Aerospace series - Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities - Part 001: Technical specification

This document specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for threaded ring coupling circular connectors with expanded beam termini, intended for use in a temperature range from −55 °C to 125 °C continuous.

Luft- und Raumfahrt - Strahlaufweitender Anschluss, berührungsloser Lichtwellenleiterkontakt in EN 3645-Standardkontaktkammern - Teil 001: Technische Lieferbedingungen

Série aérospatiale - Contact à faisceau expansé, fibre optique sans contact physique dans alvéoles standards EN 3645 - Partie 001 : Spécification technique

Le présent document spécifie les caractéristiques générales, les conditions de qualification, de réception et d’assurance qualité, ainsi que les programmes et les groupes d’essais des connecteurs circulaires à accouplement par bague filetée avec des terminaisons à faisceau élargi, destinés à une utilisation dans une plage de températures comprises entre -55 °C et 125 °C continu.

Aeronavtika - Razširjeni optični zaključki, nefizični stik optičnih vlaken v standardnih votlinah po standardu EN 3645 - 001. del: Tehnična specifikacija

General Information

Status
Not Published
Public Enquiry End Date
30-May-2023
ICS
49.090 - On-board equipment and instruments
Technical Committee
I13 - Imaginarni 13
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
30-May-2024
Due Date
18-Jul-2024
Completion Date
30-May-2024
Ref Project
FprEN 4869-001 - Aerospace series - Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities - Part 001: Technical specification

Buy Standard

prEN 4869-001:2023prEN 4869-001:2023
PreviousNext
Draft
prEN 4869-001:2023
English language
46 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4869-001:2023
01-maj-2023
Aeronavtika - Razširjeni optični zaključki, nefizični stik optičnih vlaken v
standardnih votlinah po standardu EN 3645 - 001. del: Tehnična specifikacija
Aerospace series - Expanded beam termini, fibre optic non-physical contact in EN 3645
standard cavities - Part 001: Technical specification
Luft- und Raumfahrt - Strahlaufweitender Anschluss, berührungsloser
Lichtwellenleiterkontakt in EN 3645-Standardkontaktkammern - Teil 001: Technische
Lieferbedingungen
Série aérospatiale - Contact à faisceau expansé, fibre optique sans contact physique
dans alvéoles standards EN 3645 - Partie 001 : Spécification technique
Ta slovenski standard je istoveten z: prEN 4869-001
ICS:
49.090 Oprema in instrumenti v On-board equipment and
zračnih in vesoljskih plovilih instruments
oSIST prEN 4869-001:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4869-001:2023

---------------------- Page: 2 ----------------------
oSIST prEN 4869-001:2023


DRAFT
EUROPEAN STANDARD
prEN 4869-001
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2023
ICS 49.090
English Version

Aerospace series - Expanded beam termini, fibre optic
non-physical contact in EN 3645 standard cavities - Part
001: Technical specification
Série aérospatiale - Contact à faisceau expansé, fibre Luft- und Raumfahrt - Strahlaufweitender Anschluss,
optique sans contact physique dans alvéoles standards berührungsloser Lichtwellenleiterkontakt in EN 3645-
EN 3645 - Partie 001 : Spécification technique Standardkontaktkammern - Teil 001: Technische
Lieferbedingungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4869-001:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4869-001:2023
prEN 4869-001:2023 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 9
4 Description . 10
4.1 General. 10
4.2 Receptacle.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 2591-508:2023(Main)
Aerospace series - Elements of electrical and optical connection - Part 508: Measurement of thickness of coating on contacts - Test methods
EN 2591-508:2023

This document specifies methods of measuring thickness of electro-deposited gold or gold alloys coatings on contacts of elements of connection.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 2591-509:2023(Main)
Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts
EN 2591-509:2023

This document specifies methods of verifying adhesion of electrodeposited gold and gold alloy coatings on contacts.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4641-301:2022(Main)
Aerospace series - Cables, optical 125 μm diameter cladding - Part 301: Tight structure 50/125 μm GI, fibre nominal 1,8 mm, outside diameter - Product standard
EN 4641-301:2022

This document specifies the general characteristics, conditions for qualification, acceptance and quality
assurance for a fibre optic cable with a 50/125 µm Graded Index fibre core, 1,8 mm outside diameter
for non pull-proof contact designs.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4660-003:2019(Main)
Aerospace series - Modular and Open Avionics Architectures - Part 003: Communications/Network
EN 4660-003:2019

The purpose of this MOAA standard is to define a set of open architecture standards,
concepts & guidelines for Advanced Avionics Architectures (A3).
The three main goals for the MOAA Standards are:
— Reduced life cycle costs,
— Improved mission performance,
— Improved operational performance.
The MOAA standards are organised as a set of documents including:
— A set of agreed standards that describe, using a top down approach, the Architecture overview to all
interfaces required to implement the core within avionics system,
— The guidelines for system implementation through application of the standards.
This standard details the functionality and principle interfaces of an EN 4660 compliant network to
ensure the interoperability of Common Functional Modules and design guidelines to assist in
implementation of such a network.
The purpose of this standard is to establish by means of well defined interfaces and functionality, a
network design that is technology transparent and that is open to a multi-vendor market. Therefore,
specific data communication network topology, protocols and technologies are not identified in this
document.
Although the physical organisation and implementation of the network shall remain the System
Designers choice, in accordance with the best use of the current technology, it is necessary to define
interfaces and parameter sets in order to achieve a logical definition of the network with a defined
functionality. This definition includes:
— The generic functionality applicable to all networks.
— The logical interfaces to the Operating System and Module Support Layers.
— Optionally the physical interfaces to the Common Functional Modules (CFM).
This document identifies the principle interfaces for the Network, in Clause 4, and where appropriate,
provides requirements on network parameters to be defined.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4660-005:2019(Main)
Aerospace series - Modular and Open Avionics Architectures - Part 005: Software
EN 4660-005:2019

This European Standard establishes uniform requirements for design and development of software
architecture for modular avionics systems.

  • Standard
    321 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4660-004:2019(Main)
Aerospace series - Modular and open avionics architectures - Part 004: Packaging
EN 4660-004:2019

This European standard establishes uniform requirements for Packaging for the Common Functional
Modules (CFM) within an Integrated Modular Avionic (IMA) system. It comprises the module physical
properties and the Module Physical Interface (MPI) definitions together with guidelines for IMA rack
and the operational environment.
The characteristics addressed by the Packaging Standard are:
Interchangeability:
 For a given cooling method all modules conforming to the packaging standard will function
correctly when inserted into any rack slot conforming to the standard for the cooling method.
 All modules conforming to the Module Physical Interface (MPI) definitions for connector, IED and
cooling interface will function correctly when inserted into any rack slot conforming to the same
MPI definition.
Maintainability:
 All modules are easily removable at first line.
 No special tools required at first line.
 No manual adjustment is necessary when installing modules. No tool is required for installation or
removal of the modules.
 Mechanical keying is provided that prevents insertion of a module into a rack slot that may cause
an unsafe condition.
The Module Physical Interface definition, contained within this standard, does not include the
properties of the signalling used in the optical interface (e. g. wavelength). These are covered in
EN 4660-003.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 3745-505:2018(Main)
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength
EN 3745-505:2018

This European Standard specifies a method for measuring the tensile properties of a fibre optic cable.
It shall be used together with EN 3745-100.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16603-70-01:2015(Main)
Space engineering - On-board control procedures
EN 16603-70-01:2015

This Standard defines the concept for an OBCP system, identifying the on-board functionality for OBCP execution and the ground functionality for OBCP preparation and subsequent control.
This Standard also defines the development lifecycle for OBCPs and identifies the relationships of this lifecycle with the overall space system, and in particular with the other elements of the on-board software.
This Standard assumes that missions implementing OBCPs are also compliant with ECSS-E-70-41, since a number of services contained therein are invoked in support of the operation of OBCPs and their interaction with the ground.
This Standard may be tailored for the specific characteristic and constraints of a space project in conformance with ECSS-S-ST-00.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4660-002:2011(Main)
Aerospace series - Modular and Open Avionics Architectures - Part 002: Common Functional Modules
EN 4660-002:2011

1.1   General
This standard defines the functionality and principle interfaces for the Common Functional Module (CFM) to ensure the interoperability of Common Functional Modules and provides design guidelines to assist in implementation of such a CFM. It is one of a set of standards that define an ASAAC (Allied Standard Avionics Architecture Council) Integrated Modular Avionics System.
This definition of interfaces and functionality allows a CFM design that is interoperable with all other CFM to this standard, that is technology transparent, that is open to a multi-vendor market and that can make the best use of COTS technologies.
Although the physical organisation and implementation of a CFM should remain the manufacturer's choice, in accordance with the best use of the current technology, it is necessary to define a structure for each CFM in order to achieve a logical definition of the CFM with a defined functionality. This definition includes:
-   the Generic CFM, which defines the generic functionality applicable to the complete set of CFMs. The generic functionality is defined in 4.2;
-   the processing capability, which defines the unique functionality associated with each CFM type within the set. This functionality is defined in 4.4;
-   the logical and physical interfaces that enable CFMs to be interoperable and interchangeable, these are defined in Clause 6;
-   the functionality required by a CFM to support the operation of the System is defined in Clause 6.
1.2   Relationship with other ASAAC Standards
The definition of the complete CFM is partitioned and is covered by the following ASAAC standards:
-   CFM Mechanical properties and physical Interfaces - ASAAC Standards for Packaging;
-   CFM Communication functions - ASAAC Standards for Software;
-   CFM Network interface - ASAAC Standards for Communications and Network;
-   CFM Software architecture - ASAAC Standards for Software;
-   CFM Functional requirements - This document.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4660-001:2011(Main)
Aerospace series - Modular and Open Avionics Architectures - Part 001: Architecture
EN 4660-001:2011

The purpose of this standard is to establish uniform requirements for the architecture for Integrated Modular Avionic (IMA) systems as defined by the ASAAC Programme.
The IMA architecture can be built by using common components. These components are specified in separate standards. Ways of using these components are described in a set of guidelines. This document gives references to these Standards and Guidelines as well as a short introduction to IMA.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day