iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1112:1997

(Main)

Shower outlets for (PN 10) sanitary tapware

Shower outlets for (PN 10) sanitary tapware

The aim of this European Standard is to specify: - The dimensional, leaktight- ness, mechanical,   hydraulic and acoustic characteristics with which shower outlets shall comply; - the procedures for testing these characteristics. It applies to shower heads and hand showers of any material used for ablutionarypurposes and intended for equiping and supplementing sanitary tapware for baths and showers. They shall only be connected downstream of the obturator of the tapware.

Brausen für (PN 10) Sanitärarmaturen

Diese Europäischen Norm hat den Zweck, - die Masse, die Dichtheit, das mecha- nische, hydraulische und das Geräuschverhalten, denen Brausen genügen müssen - die Prüfverfahren, um diese Anforderungen zu überprüfen festzulegen. Sie gilt unabhängig vom verwendeten Material für Brauseköpfe und Handbrausen für die Körperhygiene als Ausrüstung von Sanitärarmaturen in Bädern und Duschen. Sie dürfen nur nach dem Absperrorgan der Sanitärarmatur angeschlossenwerden.

Douches pour robinetterie sanitaire (PN 10)

La présente norme européenne a pour objet de fixer: - les caractéristiques dimensionnelles d'étanchéité de comportement mécanique, hydraulique, acoustique auxquelles doivent répondre les douches; - les méthodes d'essai permettant de contrôler ces caractéristiques. Elle s'applique aux douches et douchettes, quel que soit le matériau utilisé, destinées a équiper et a compléter les robinetteries sanitaires de baignoires ou de douches réser- vées pour l'hygiene corporelle. Elles ne doivent etre raccordées qu'en aval de l'obturateur de la robinetterie.

Prhe (PN 10) za sanitarne armature

General Information

Status
Withdrawn
Publication Date
31-Aug-1997
Withdrawal Date
30-Nov-2008
ICS
91.140.70 - Sanitary installations
Technical Committee
IOVO - Water supply and waste water engineering
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
21-Nov-2008
Due Date
14-Dec-2008
Completion Date
01-Dec-2008
Directive
89/106/EEC - Construction products
Mandate
M/EXP - Expected mandates in CPD field.
Ref Project
EN 1112:1997 - Shower outlets for (PN 10) sanitary tapware

Relations

Child
SIST EN 1113:1997 - Showers hoses for (PN 10) sanitary tapware
Effective Date
22-Dec-2008
Replaced By
SIST EN 1112:2009 - Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification
Effective Date
01-Jan-2009

Buy Standard

EN 1112:1997EN 1112:1997
PreviousNext
Standard
EN 1112:1997
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prhe (PN 10) za sanitarne armatureBrausen für (PN 10) SanitärarmaturenDouches pour robinetterie sanitaire (PN 10)Shower outlets for (PN 10) sanitary tapware91.140.70Sanitarne napraveSanitary installationsICS:Ta slovenski standard je istoveten z:EN 1112:1997SIST EN 1112:1997de01-september-1997SIST E
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 246:2022(Main)
Sanitary tapware - General specifications for aerators
EN 246:2021

This document specifies:
- the dimensional, mechanical, hydraulic and acoustic characteristics with which sanitary tapware aerators (with and without flow regulation) should comply;
- the procedures for testing these characteristics.
This document is applicable to:
- Sanitary tapware aerators intended to be mounted on tapware used with sanitary appliances in toilets, bathrooms and kitchens (e.g. single taps, combination tap assemblies, mechanical mixing valves, thermostatic mixing valves);
—-Sanitary tapware aerators used under the following pressure and temperature conditions:
Note 1: Sanitary tapware aerators can only be connected downstream of the obturator of the sanitary tapware product.
Note 2: For the purposes of brevity, sanitary tapware aerators will be detailed only as aerators in the rest of this document.
Note 3: The tests described in this document are type tests (laboratory tests) and not quality control tests carried out during manufacture.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17426:2019(Main)
Sanitary appliances - Drainage systems for the application of sanitary appliances
CEN/TR 17426:2019

This document describes the installation rules that must be followed to ensure proper functioning of the drainage system depending on the specified performance of the sanitary appliances.
These performance characteristics of sanitary appliances (defined in the harmonized standards EN 997, EN 13407, EN 14688, EN 14528 and EN 14527) are explained and brought into line with the application rules of standard series EN 12056.
According to Regulation (EU) 305/2011, legally binding information on building requirements must be provided by the National Product Information Point. Therefore, additional national requirements are mentioned informatively where information is available.

  • Technical report
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 33:2019(Main)
WC pans and WC suites - Connecting dimensions
EN 33:2019

This document specifies the connecting dimensions of WC pans and WC suites regardless of the materials used for their manufacture.
This document does not apply to siphonic action WC pans and WC suites.
NOTE 1   Other connecting dimensions are permitted, e. g. special designs of WC pans, if the manufacturer supplies or recommends the appropriate fittings.
NOTE 2   The shape of the appliance in the figures is for illustration only; it in no way prejudices the final shape of the appliance, which is left to the initiative of the manufacturer.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14527:2016+A1:2019(Main)
Shower trays for domestic purposes
EN 14527:2016+A1:2018

This European Standard specifies "characteristics", test methods and procedures for evaluation of conformity for shower trays used for domestic purposes which ensure that the product, when installed, used and maintained in accordance with the manufacturer's instructions, will satisfy cleanability and durability when used for personal hygiene.
This standard is applicable to all sizes and shapes of shower trays.
This standard does not cover shower trays for use with medical provisions.
NOTE 1   For the purpose of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings.
NOTE 2   Annex A lists characteristics of materials commonly used for manufacturing shower trays.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14516:2015+A1:2019(Main)
Baths for domestic purposes
EN 14516:2015+A1:2018

This European Standard specifies "characteristics", test methods and procedures for evaluation of conformity for baths used for domestic purposes and personal hygiene, which ensure that the product, when installed and maintained in accordance with the manufacturer's instructions, will satisfy requirements for cleanability and durability.
This European Standard is applicable to all sizes and shapes of baths.
This European Standard does not cover baths for use with medical provisions.
NOTE 1   For the purpose of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings.
NOTE 2   Annex A lists characteristics of materials commonly used for manufacturing baths.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12764:2015+A1:2019(Main)
Sanitary appliances - Specification for whirlpool baths
EN 12764:2015+A1:2018

This European Standard specifies "characteristics" for whirlpool baths, having a rated voltage of not more than 250 V for single phase appliances and 480 V for other appliances, which are intended to be installed in indoor domestic situations and used in accordance with the manufacturer’s instructions for personal hygiene. Such whirlpool baths are tested and supplied as a complete independent unit designed to be drained down after every use. They may be transported in several separate parts, for assembly on site, to facilitate delivery.
Safety aspects of Whirlpool baths (except use by young children and slow moving/weak elderly or disabled individuals) are covered by EN 60335 2 60.
Exclusions: this standard does not cover additional requirements for whirlpool baths intended for uses where specific medical provisions are required, or whirlpool baths for communal uses where they are not drained down after every use. Portable whirlpool devices are not covered by this standard.
For the purposes of this standard the term ‘domestic situations’ includes use in hotels, accommodation for students, hospitals and similar buildings.
Warning: Slow moving elderly or disabled persons should take care when using whirlpool baths. Young children should not be allowed to use whirlpool baths without supervision.
NOTE 1   It is unrealistic to expect manufacturers to provide a definition of what constitutes a ‘slow moving elderly or disabled person’, or ‘young children’. The former is the responsibility of the individual or a carer. The latter is a parental responsibility.
NOTE 2   When EN 60335-2-60 is amended to cover use of whirlpool baths by slow moving elderly or disabled persons and young children the warning given above will be deleted from this standard.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14428:2015+A1:2019(Main)
Shower enclosures - Functional requirements and test methods
EN 14428:2015+A1:2018

This European Standard specifies "characteristics" for shower enclosures for domestic purposes which ensure that the product, when installed in accordance with the manufacturer's installation instructions, gives satisfactory performance when used as intended.
This European Standard does not apply to shower cabinets or curtains and does not specify aesthetic and dimensional "characteristics".
NOTE   For the purposes of this document the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14055:2018(Main)
WC and urinal flushing cisterns
EN 14055:2018

This European Standard specifies design, performance requirements and the test methods for WC and urinal flushing cisterns with flushing mechanism, inlet valve and overflow.
This document covers flushing cisterns designed to be connected to drinking water installations inside buildings.
This standard does not cover automatic valveless siphon flushing cisterns for flushing urinals.
NOTE   Flushing cisterns for one-piece WCs and close-coupled suites are covered by EN 997.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 997:2018(Main)
WC pans and WC suites with integral trap
EN 997:2018

This European Standard specifies constructional and performance requirements together with test methods for close-coupled suites, one-piece and independent WC pans with integral trap used for personal hygiene manufactured from glazed ceramics or stainless steel.
This European Standard does not apply to squatting toilets, WC pans without integral trap or flushing cisterns as separate appliances.
In the case of independent WC pans, the associated flushing cisterns and pressure valves are covered by other standards and the reference to cisterns in this standard is related only to the definition and requirements of flushing volume.
In the case of close-coupled suites and one-piece WCs, this standard also specifies design, performance requirements and the test methods for designated flushing cisterns with flushing mechanisms, inlet valves and overflows. For these products, this standard covers flushing cisterns designed to be connected to drinking water installations inside buildings.
Before installation of WCs, EN 12056 2 and national requirements need to be taken into consideration.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14688:2015+A1:2018(Main)
Sanitary appliances - Wash basins - Functional requirements and test methods
EN 14688:2015+A1:2018

This European Standard specifies the functional characteristics and test methods for wash basins for domestic purposes.
NOTE 1   For the purposes of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.
NOTE 2   All drawings are examples only. The shape of the appliance is left to the discretion of the manufacturer.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day