SIST EN 14635:2010
(Main)Glass packaging - 26 H 126 crown finish - Dimensions
Glass packaging - 26 H 126 crown finish - Dimensions
This document specifies the dimensions of the 26 mm shallow crown finish for glass bottles containing beverages. The shallow crown finish is designed to use a metal crown closure (see CE.T.I.E. data sheet EC 1.02 [2]).
Verpackungen aus Glas - Kronenmundstück 26 H 126 - Maße
Dieses Dokument legt die Maße des 26 mm halbhohen Kronenmundstückes für Getränkeflaschen aus Glas fest. Das halbhohe Kronenmundstück ist für die Verwendung eines Kronenverschlusses aus Metall ausgelegt (siehe CE.T.I.E. Dokumentationsblatt EC 1.02 [2]).
Emballages en verre - Bague couronne 26 H 126 - Dimensions
Le présent document spécifie les dimensions des bagues couronne basses de 26 mm pour les bouteilles en
verre destinées à contenir des boissons. La bague couronne basse est conçue pour être utilisée avec un
bouchon couronne métallique (voir CE.T.I.E. Fiche documentaire EC1-02) [2]).
Steklena embalaža - Kronsko grlo 26 H 126 - Mere
Ta evropski standard določa dimenzije 26 mm plitvega kronskega grla za steklene steklenice, ki vsebujejo pijače. Plitko kronsko grlo je zasnovano tako, da uporablja kovinski kronski zaključek (glej CE.T.I.E. podatkovni list EC1-02, revizija 1 [2]).
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steklena embalaža - Kronsko grlo 26 H 126 - MereVerpackungen aus Glas - Kronenmundstück 26 H 126 - MaßeEmballages en verre - Bague couronne 26 H 126 - DimensionsGlass packaging - 26 H 126 crown finish - Dimensions55.100Steklenice. Lonci. KozarciBottles. Pots. JarsICS:Ta slovenski standard je istoveten z:EN 14635:2010SIST EN 14635:2010en,fr,de01-november-2010SIST EN 14635:2010SLOVENSKI
STANDARDSIST EN 14635:20051DGRPHãþD
SIST EN 14635:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14635
June 2010 ICS 55.100 Supersedes EN 14635:2004English Version
Glass packaging - 26 H 126 crown finish - Dimensions
Emballages en verre - Bague couronne 26 H 126 - Dimensions
Verpackungen aus Glas - Kronenmundstück 26 H 126 - Maße This European Standard was approved by CEN on 5 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14635:2010: ESIST EN 14635:2010
EN 14635:2010 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Dimensions .5 Bibliography . 10
SIST EN 14635:2010
EN 14635:2010 (E) 3 Foreword This document (EN 14635:2010) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn at the latest by December 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14635
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.