iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 7887:1996

(Main)

Water quality - Examination and determination of colour (ISO 7887:1994)

Water quality - Examination and determination of colour (ISO 7887:1994)

Cancels and replaces the first edition (1985). Specifies three methods for the examination of colour: a method for the examination of apparent colour by visually observing a water sample in a bottle; a method for the determination of the true colour of a water sample using optical apparatus; a method for the determination of the colour by visual comparison with hexachloroplatinate standard solutions. Under certain circumstances, strongly coloured water samples need to be diluted before examination or determination.

Wasserbeschaffenheit - Untersuchung und Bestimmung der Färbung (ISO 7887:1994)

Diese internationale Norm beschreibt die Verfahren zur Bestimmung der Färbung: Hauptabschnitt 2 beschreibt ein Verfahren zur Bestimmung der Färbung durch Betrachtung einer Wasserprobe in einem Behälter. Damit wird nur eine vorläufige Information erhalten, beispielsweise bei Untersuchungen vor Ort. DasErgebnis kann nur als "scheinbare Färbung" angegeben werden. Hauptabschnitt 3 beschreibt ein Verfahren zur Bestimmung der Färbung einer Wasserprobe mit Hilfeeines optischen Gerätes. Das Verfahren ist auf Roh- und Trinkwasser und auf schwach gefärbtes Industrieabwasser anwendbar. Störungen siehe Abschnitt 3.3.

Qualité de l'eau - Examen et détermination de la couleur (ISO 7887:1994)

La présente Norme internationale prescrit trois méthodes d'examen de la couleur : La section 2 prescrit une méthode d'examen de la couleur apparente par observation visuelle d'un échantillon d'eau dans une bouteille. Cela donne une première indication, par exemple sur le terrain. Seule la couleur apparente peut être indiquée. La section 3 prescrit une méthode de détermination de la couleur vraie d'un échantillon d'eau au moyen d'un appareillage d'optique, et peut être appliquée aux eaux brutes et potables, et aux eaux industrielles faiblement colorées. Pour les interférences, voir 3.3. La section 4 prescrit une méthode de détermination de la couleur par comparaison visuelle avec des solutions étalons d'hexachloroplatinate et peut être appliquée aux eaux brutes et potables. Pour les interférences, voir 4.2. Dans certaines circonstances, des échantillons d'eaux fortement colorés nécessitent d'être dilués avant examen ou détermination. Dans le rapport d'essai, il est absolument nécessaire de mentionner la méthode utilisée.

Kakovost vode - Preiskovanje in določanje barve (ISO 7887:1994)

General Information

Status
Withdrawn
Publication Date
31-May-1996
Withdrawal Date
09-May-2012
ICS
13.060.60 - Examination of physical properties of water
Technical Committee
KAV - Water quality
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
09-May-2012
Due Date
01-Jun-2012
Completion Date
10-May-2012
Ref Project
EN ISO 7887:1994 - Water quality - Examination and determination of colour (ISO 7887:1994)

Relations

Replaced By
SIST EN ISO 7887:2012 - Water quality - Examination and determination of colour (ISO 7887:2011)
Effective Date
01-Jun-2012
Revised
dSIST ISO/DIS 7887:2009 - Water quality - Examination and determination of colour
Effective Date
10-Apr-2009

Buy Standard

EN ISO 7887:1996EN ISO 7887:1996
PreviousNext
Standard
EN ISO 7887:1996
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7887:1996
01-junij-1996
.DNRYRVWYRGH3UHLVNRYDQMHLQGRORþDQMHEDUYH ,62
Water quality - Examination and determination of colour (ISO 7887:1994)
Wasserbeschaffenheit - Untersuchung und Bestimmung der Färbung (ISO 7887:1994)
Qualité de l'eau - Examen et détermination de la couleur (ISO 7887:1994)
Ta slovenski standard je istoveten z: EN ISO 7887:1994
ICS:
13.060.60 Preiskava fizikalnih lastnosti Examination of physical
vode properties of water
SIST EN ISO 7887:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7887:1996

---------------------- Page: 2 ----------------------

SIST EN ISO 7887:1996

---------------------- Page: 3 ----------------------

SIST EN ISO 7887:1996

---------------------- Page: 4 ------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 13165-2:2023(Main)
Water quality - Radium-226 - Part 2: Test method using emanometry (ISO 13165-2:2022)
EN ISO 13165-2:2022

This document specifies a test method to determine radium-226 (226Ra) activity concentration in all types of water by emanometry.
The test method specified is suitable for the determination of the soluble, suspended and total 226Ra activity concentration in all types of water with soluble 226Ra activity concentrations greater than 0,02 Bq l−1.
The decay chains of 238U and 232Th are given in Annex A. Figure A.1 shows the 238U and its decay chain.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13163:2022(Main)
Water quality - Lead-210 - Test method using liquid scintillation counting (ISO 13163:2021)
EN ISO 13163:2022

This document specifies a method for the measurement of 210Pb in all types of waters by liquid
scintillation counting (LSC).
The method is applicable to test samples of supply/drinking water, rainwater, surface and ground water,
as well as cooling water, industrial water, domestic, and industrial wastewater after proper sampling
and handling, and test sample preparation. Filtration of the test sample is necessary. Lead‑210 activity
concentration in the environment can vary and usually ranges from 2 mBq l
-1 to 300 mBq l
-1 [27][28].
Using currently available liquid scintillation counters, the limit of detection of this method for 210Pb
is generally of the order of 20 mBq l
-1 to 50 mBq l
-1, which is lower than the WHO criteria for safe
consumption of drinking water (100 mBq l−1).[4][6]
These values can be achieved with a counting time
between 180 min and 720 min for a sample volume from 0,5 l to 1,5 l. Higher activity concentrations
can be measured by either diluting the sample or using smaller sample aliquots or both. The method
presented in this document is not intended for the determination of an ultra-trace amount of 210Pb.
The range of application depends on the amount of dissolved material in the water and on the
performance characteristics of the measurement equipment (background count rate and counting
efficiency).
The method described in this document is applicable to an emergency situation.
The analysis of Pb adsorbed to suspended matter is not covered by this method.
It is the user’s responsibility to ensure the validity of this test method for the water samples tested.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13160:2021(Main)
Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting (ISO 13160:2021)
EN ISO 13160:2021

This document specifies conditions for the determination of 90Sr and 89Sr activity concentration in
samples of environmental water using liquid scintillation counting (LSC) or proportional counting (PC).
The method is applicable to test samples of drinking water, rainwater, surface and ground water,
marine water, as well as cooling water, industrial water, domestic, and industrial wastewater after
proper sampling and handling, and test sample preparation. Filtration of the test sample and a chemical
separation are required to separate and purify strontium from a test portion of the sample.
The detection limit depends on the sample volume, the instrument used, the sample count time, the
background count rate, the detection efficiency and the chemical yield. The method described in this
document, using currently available LSC counters, has a detection limit of approximately 10 mBq l−1
and 2 mBq l−1 for 89Sr and 90Sr, respectively, which is lower than the WHO criteria for safe consumption
of drinking water (100 Bq·l−1 for 89Sr and 10 Bq·l−1 for 90Sr)[3]. These values can be achieved with a
counting time of 1 000 min for a sample volume of 2 l.
The methods described in this document are applicable in the event of an emergency situation.
When fallout occurs following a nuclear accident, the contribution of 89Sr to the total amount of
radioactive strontium is not negligible. This document provides test methods to determine the activity
concentration of 90Sr in presence of 89Sr.
The analysis of 90Sr and 89Sr adsorbed to suspended matter is not covered by this method.
It is the user’s responsibility to ensure the validity of this test method selected for the water samples
tested.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10703:2021(Main)
Water quality - Gamma-ray emitting radionuclides - Test method using high resolution gamma-ray spectrometry (ISO 10703:2021)
EN ISO 10703:2021

This document specifies a method for the physical pre-treatment and conditioning of water samples
and the determination of the activity concentration of various radionuclides emitting gamma-rays with
energies between 40 keV and 2 MeV, by gamma‑ray spectrometry according to the generic test method
described in ISO 20042.
The method is applicable to test samples of drinking water, rainwater, surface and ground water as well
as cooling water, industrial water, domestic and industrial wastewater after proper sampling, sample
handling, and test sample preparation (filtration when necessary and taking into account the amount
of dissolved material in the water). This method is only applicable to homogeneous samples or samples
which are homogeneous via timely filtration.
The lowest limit that can be measured without concentration of the sample or by using only passive
shield of the detection system is about 5·10-2 Bq/l for e.g. 137Cs1). The upper limit of the activity
corresponds to a dead time of 10 %. Higher dead times may be used but evidence of the accuracy of the
dead-time correction is required.
Depending on different factors, such as the energy of the gamma-rays, the emission probability per
nuclear disintegration, the size and geometry of the sample and the detector, the shielding, the counting
time and other experimental parameters, the sample may require to be concentrated by evaporation
if activities below 5·10-2 Bq/l need to be measured. However, volatile radionuclides (e.g. radon and
radioiodine) can be lost during the source preparation.
This method is suitable for application in emergency situations.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13162:2021(Main)
Water quality - Carbon 14 - Test method using liquid scintillation counting (ISO 13162:2021)
EN ISO 13162:2021

This document specifies a method for the measurement of 14C activity concentration in all types of
water samples by liquid scintillation counting (LSC) either directly on the test sample or following a
chemical separation.
The method is applicable to test samples of supply/drinking water, rainwater, surface and ground water,
marine water, as well as cooling water, industrial water, domestic, and industrial wastewater.
The detection limit depends on the sample volume, the instrument used, the sample counting time, the
background count rate, the detection efficiency and the chemical recovery. The method described in
this document, using currently available liquid scintillation counters and suitable technical conditions,
has a detection limit as low as 1 Bq∙l−1, which is lower than the WHO criteria for safe consumption of
drinking water (100 Bq·l-1). 14C activity concentrations can be measured up to 106 Bq∙l-1 without any
sample dilution.
It is the user’s responsibility to ensure the validity of this test method for the water samples tested.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22515:2021(Main)
Water quality - Iron-55 - Test method using liquid scintillation counting (ISO 22515:2021)
EN ISO 22515:2021

This standard specifies a method for the measurement of iron-55 and nickel-63 (55Fe and 63Ni)in all types of waters by liquid scintillation counting (LSC).
The detection limit depends on the sample volume and the instrument used. The test method described in this standard is based on currently available LSC counters.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22017:2021(Main)
Water quality - Guidance for rapid radioactivity measurements in nuclear or radiological emergency situation (ISO 22017:2020)
EN ISO 22017:2020

This standard describes the requirements for rapid testing of water samples under emergency situations in laboratories:
- taking into account a special context for analyses, e.g. an unknown and unusual contamination;
- using or adapting if possible radioactivity measurements methods used in routine to get a result
rapidly or applying specific rapid methods previously tested by the laboratory, e.g. for 89Sr determination ;
- preparing the laboratory to analyse a large number of potentially contaminated samples.
The focus thereby is on cases where rapid radioactivity test methods are applied for all kind of waters. The first steps of the analytical strategy is often based on gross alpha and gross beta as screening methods (adaptation of ISO 10704 and ISO 11704) and gamma spectrometry (adaptation of ISO 10703). Then if necessary, specific radionuclides standards are adapted and applied (for example, Strontium 90 measurement following ISO 13160).
This guideline refers to a number of ISO standards. If appropriate, it will also refer to national or other
publically available standards.
Screening techniques that can be carried out on site are not part of this guide.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13161:2021(Main)
Water quality - Polonium 210 - Test method using alpha spectrometry (ISO 13161:2020)
EN ISO 13161:2020

This document specifies a method for the measurement of 210Po in all types of waters by alpha
spectrometry.
The method is applicable to test samples of supply/drinking water, rainwater, surface and ground
water, marine water, as well as cooling water, industrial water, domestic, and industrial wastewater
after proper sampling and handling, and test sample preparation. Filtration of the test sample may be
required.
The detection limit depends on the sample volume, the instrument used, the counting time, the
background count rate, the detection efficiency and the chemical yield. The method described in
this document, using currently available alpha spectrometry apparatus, has a detection limit of
approximately 5 mBq l−1, which is lower than the WHO criteria for safe consumption of drinking water
(100 mBq l−1). This value can be achieved with a counting time of 24 h for a sample volume of 500 ml.
The method described in this document is also applicable in an emergency situation.
The analysis of 210Po adsorbed to suspended matter in the sample is not covered by this method.
If suspended material has to be removed or analysed, filtration using a 0,45 μm filter is recommended.
The analysis of the insoluble fraction requires a mineralization step that is not covered by this document
[13]. In this case, the measurement is made on the different phases obtained. The final activity is the
sum of all the measured activity concentrations.
It is the user’s responsibility to ensure the validity of this test method for the water samples tested.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13164-3:2020(Main)
Water quality - Radon-222 - Part 3: Test method using emanometry (ISO 13164-3:2013)
EN ISO 13164-3:2020

ISO 13164-3:2013 specifies a test method for the determination of radon-222 activity concentration in a sample of water following its transfer from the aqueous phase to the air phase by degassing and its detection. It gives recommendations for rapid measurements performed within less than 1 h.
The radon-222 activity concentrations, which can be measured by this test method utilizing currently available instruments, range from 0,1 Bq l−1 to several hundred thousand becquerels per litre for a 100 ml test sample.
This test method is used successfully with drinking water samples. The laboratory is responsible for ensuring the validity of this test method for water samples of untested matrices.
This test method can be applied on field sites or in the laboratory.
Annexes A and B give indications on the necessary counting conditions to meet the required sensitivity for drinking water monitoring

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13165-3:2020(Main)
Water quality - Radium-226 - Part 3: Test method using coprecipitation and gamma-spectrometry (ISO 13165-3:2016)
EN ISO 13165-3:2020

ISO 13165-3:2016 specifies the determination of radium-226 (226Ra) activity concentration in all types of water by coprecipitation followed by gamma-spectrometry (see ISO 18589‑3).
The method described is suitable for determination of soluble 226Ra activity concentrations greater than 0,02 Bq l−1 using a sample volume of 1 l to 100 l of any water type.
For water samples smaller than a volume of 1 l, direct gamma-spectrometry can be performed following ISO 10703 with a higher detection limit.
NOTE This test method also allows other isotopes of radium, 223Ra, 224Ra, and 228Ra, to be determined.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day