SIST EN 60317-39:2016

Specifications for particular types of winding wires - Part 39: Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180

This part of IEC 60317 specifies the requirements of glass-fibre braided impregnated, bare, or
grade 1 or grade 2 enamelled rectangular copper winding wire, temperature index 180.
NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be
established. Consequently, a class based on the requirements for temperature index and heat shock temperature
cannot be specified.

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 39: Flachdrähte aus Kupfer, blank oder lackisoliert, umflochten mit Glasgewebe, imprägniert mit Harz oder Lack, Temperaturindex 180

Spécifications pour types particuliers de fils de bobinage -- Partie 39: Fil de section rectangulaire en cuivre nu ou émaillé recouvert d'une tresse de fibres de verre imprégnées de résine ou de vernis, indice de température 180

L'IEC 60317-39:2015 spécifie les exigences relatives aux fils de bobinage de section rectangulaire en cuivre nu ou émaillé de grade 1 ou de grade 2, recouverts d'une tresse de fibres de verre imprégnées, indice de température 180. Cette deuxième édition annule et remplace la première édition parue en 1992, l'Amendement 1:1997 et l'Amendement 2:2005. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- la révision de l'Article 2, Références normatives;
- un nouveau 3.2.2 contenant des notes générales sur le fil de bobinage intégrées auparavant au domaine d'application;
- la révision des références à l'IEC 60317-0-5 pour bien établir que leur application est normative.
Mots clés: fils isolés utilisés pour les enroulements des appareils électriques

Specifikacije za posebne vrste navijalnih žic - 39. del: Bakrena žica s pravokotnim prerezom, gola ali emajlirana, ovita z optičnimi vlakni in impregnirana s smolo ali lakom, temperaturni indeks 180

Ta del standarda IEC 60317 določa zahteve za bakreno žico, ovito z optičnimi vlakni, impregnirano, golo, ali razreda 1 ali 2, emajlirano bakreno žico s pravokotnim prerezom, temperaturni indeks 180.
OPOMBA: Za to vrsto žice je preskus s toplotnim šokom neustrezen, zato ni mogoče določiti temperature toplotnega šoka. Posledično ni mogoče določiti razreda na podlagi zahtev za temperaturni indeks in temperaturo toplotnega šoka.

General Information

• Status: Withdrawn
• Publication Date: 22-Feb-2016
• Withdrawal Date: 11-Apr-2023
• ICS: 29.060.10 - Wires
• ICS: 77.150.30 - Copper products
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 12-Apr-2023
• Due Date: 05-May-2023
• Completion Date: 12-Apr-2023
• Ref Project: EN 60317-39:2016 - Specifications for particular types of winding wires - Part 39: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 180

Relations

• Replaces: SIST EN 60317-39:2001/A2:2006 - Specifications for particular types of winding wires -- Part 39: Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
• Effective Date: 01-Mar-2016
• Replaces: SIST EN 60317-39:2001 - Specifications for particular types of winding wires -- Part 39: Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
• Effective Date: 01-Mar-2014
• Replaces: SIST EN 60317-39:2001/A1:2001 - Specifications for particular types of winding wires -- Part 39: Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
• Effective Date: 01-Mar-2014
• Replaces: SIST EN 60317-39:2001/A1:2001 - Specifications for particular types of winding wires -- Part 39: Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 60317-39:2001/A2:2006 - Specifications for particular types of winding wires -- Part 39: Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
• Effective Date: 29-Jan-2023
• Replaces: SIST EN 60317-39:2001 - Specifications for particular types of winding wires -- Part 39: Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
• Effective Date: 29-Jan-2023
• Replaces: SIST EN 60317-39:2001/A2:2006 - Specifications for particular types of winding wires -- Part 39: Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
• Effective Date: 07-Jun-2022
• Replaces: SIST EN 60317-39:2001/A1:2001 - Specifications for particular types of winding wires -- Part 39: Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60317-39:2016
01-april-2016
1DGRPHãþD
SIST EN 60317-39:2001
SIST EN 60317-39:2001/A1:2001
SIST EN 60317-39:2001/A2:2006
6SHFLILNDFLMH]DSRVHEQHYUVWHQDYLMDOQLKåLFGHO%DNUHQDåLFDVSUDYRNRWQLP
SUHUH]RPJRODDOLHPDMOLUDQDRYLWD]RSWLþQLPLYODNQLLQLPSUHJQLUDQDVVPRORDOL
ODNRPWHPSHUDWXUQLLQGHNV
Specifications for particular types of winding wires - Part 39: Glass-fibre braided resin or
varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
Spécifications pour types particuliers de fils de bobinage -- Partie 39: Fil de section
rectangulaire en cuivre nu ou émaillé recouvert d'une tresse de fibres de verre
imprégnées de résine ou de vernis, indice de température 180
Ta slovenski standard je istoveten z: EN 60317-39:2016
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
SIST EN 60317-39:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60317-39:2016

---------------------- Page: 2 ----------------------

SIST EN 60317-39:2016


EUROPEAN STANDARD EN 60317-39

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2016
ICS 29.060.10 Supersedes EN 60317-39:1994
English Version
Specifications for particular types of winding wires -
Part 39: Glass-fibre braided resin or varnish-impregnated, bare
or enamelled rectangular copper wire, temperature index 180
(IEC 60317-39:2015)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 39: Fil de section rectangulaire en cuivre nu ou Wickeldrahten - Teil 39: Flachdrähte aus Kupfer, blank oder
émaillé, recouvert d'une tresse de fibres de verre lackisoliert, umsponnen mit Glasgewebe, imprägniert mit
imprégnées de résine ou de vernis, indice Harz oder Lack, Temperaturindex 180
de température 180 (IEC 60317-39:2015)
(IEC 60317-39:2015)
This European Standard was approved by CENELEC on 2015-08-26. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60317-39:2016 E

---------------------- Page: 3 ----------------------

SIST EN 60317-39:2016
EN 60317-39:2016
European foreword
The text of document 55/1460/CDV, future edition 2 of IEC 60317-39, prepared by
IEC/TC 55 "Winding wires" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60317-39:2016.

The following dates are fixed:
(dop) 2016-07-15
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-01-15
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60317-39:1994.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 60317-39:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60264 Series NOTE Harmonized as EN 60264 Series.
IEC 60317 Series NOTE Harmonized as EN 60317 Series.
IEC 60851 Series NOTE Harmonized as EN 60851 Series.

2

---------------------- Page: 4 ----------------------

SIST EN 60317-39:2016
EN 60317-39:2016
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu

Publication Year Title EN/HD Year

IEC 60317-0-5 2006 Specifications for particular types of EN 60317-0-5 2007
winding wires -
Part 0-5: General requirements - Glass-
fibre braided resin or varnish impregnated,
bare or enamelled rectangular copper wire

3

---------------------- Page: 5 ----------------------

SIST EN 60317-39:2016

---------------------- Page: 6 ----------------------

SIST EN 60317-39:2016



IEC 60317-39

®


Edition 2.0 2015-07




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Specifications for particular types of winding wires –

Part 39: Glass-fibre braided resin or varnish-impregnated, bare or enamelled

rectangular copper wire, temperature index 180




Spécifications pour types particuliers de fils de bobinage –

Partie 39: Fil de section rectangulaire en cuivre nu ou émaillé, recouvert d’une


tresse de fibres de verre imprégnées de résine ou de vernis, indice de

température 180












INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 29.060.10 ISBN 978-2-8322-2804-3



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60317-39:2016
– 2 – IEC 60317-39:2015 © IEC 2015
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, general notes and appearance . 6
3.1 Terms and definitions . 6
3.2 General notes . 6
3.2.1 Methods of test . 6
3.2.2 Winding wire . 6
3.3 Appearance . 7
4 Dimensions. 7
5 Electrical resistance . 7
6 Elongation . 7
7 Springiness . 7
8 Flexibility and adherence . 7
9 Heat shock . 7
10 Cut-through . 7
11 Resistance to abrasion . 7
12 Resistance to solvents . 7
13 Breakdown voltage . 7
14 Continuity of insulation . 8
15 Temperature index . 8
16 Resistance to refrigerants . 8
17 Solderability . 8
18 Heat or solvent bonding . 8
19 Dielectric dissipation factor . 8
...