SIST EN 846-4:2004/A1:2004
(Amendment)Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps
Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps
This European Standard specifies methods for determining the load capacity and load-deflection characteristics of restraint straps fixed to timber joists, rafters and timber wall plates and masonry walls.
Prüfverfahren für Ergänzungsbauteile für Mauerwerk - Teil 4: Bestimmung der Festigkeit und der Last-Verformungseigenschaften von Bändern
Méthodes d'essai des composants accessoires de maçonnerie - Partie 4: Détermination de la résistance et de la rigidité des brides de fixation
Metode preskušanja dodatnih komponent zidovine – 4. del: Določanje nosilnosti in lastnosti sila-pomik trakov
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 846-4:2004/A1:2004
01-december-2004
0HWRGHSUHVNXãDQMDGRGDWQLKNRPSRQHQW]LGRYLQH±GHO'RORþDQMHQRVLOQRVWLLQ
ODVWQRVWLVLODSRPLNWUDNRY
Methods of test for ancillary components for masonry - Part 4: Determination of load
capacity and load-deflection characteristics of straps
Prüfverfahren für Ergänzungsbauteile für Mauerwerk - Teil 4: Bestimmung der Festigkeit
und der Last-Verformungseigenschaften von Bändern
Méthodes d'essai des composants accessoires de maçonnerie - Partie 4: Détermination
de la résistance et de la rigidité des brides de fixation
Ta slovenski standard je istoveten z: EN 846-4:2001/A1:2004
ICS:
91.080.30 Zidane konstrukcije Masonry
SIST EN 846-4:2004/A1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 846-4:2004/A1:2004
---------------------- Page: 2 ----------------------
SIST EN 846-4:2004/A1:2004
EUROPEAN STANDARD
EN 846-4:2001/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2004
ICS 91.080.30
English version
Methods of test for ancillary components for masonry - Part 4:
Determination of load capacity and load-deflection
characteristics of straps
Méthodes d'essai des composants accessoires de Prüfverfahren für Ergänzungsbauteile für Mauerwerk - Teil
maçonnerie - Partie 4: Détermination de la résistance et de 4: Bestimmung der Festigkeit und der Last-
la rigidité des brides de fixation Verformungseigenschaften von Bändern
This amendment A1 modifies the European Standard EN 846-4:2001; it was approved by CEN on 6 August 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ir
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.