Personal flotation devices - Part 5: Buoyancy aids (level 50) - Safety requirements (ISO 12402-5:2020)

ISO 12402-5 specifies the safety requirements for buoyancy aids with a buoyancy of not less than 50 N used in sheltered waters with help and rescue close at hand under such circumstances where more bulky or buoyant devices can impair the user's activity. It applies to buoyancy aids used by adults or children. ISO 12402-5 is not applicable to one-piece suits.

Persönliche Auftriebsmittel - Teil 5: Schwimmhilfen (Stufe 50) - Sicherheitstechnische Anforderungen (ISO 12402-5:2020)

Dieses Dokument legt die sicherheitstechnischen Anforderungen für Schwimmhilfen, Stufe 50, fest. Es gilt für Schwimmhilfen nur für Erwachsene und Kinder mit einer Körpermasse von über 25 kg, die in geschützten Gewässern verwendet werden.
Die Schwimmhilfen erfordern eine aktive Teilnahme des Benutzers, wo Hilfe und Rettung in der Nähe sind.
Einteilige oder zweiteilige Schwimmanzüge mit Feststoff-Auftrieb  für besondere Einsatzzwecke werden nach den Anforderungen von ISO 12402 6:2020 zugelassen .

Équipements individuels de flottabilité - Partie 5 : Aides à la flottabilité (niveau 50) - Exigences de sécurité (ISO 12402-5:2020)

Le présent document spécifie les exigences de sécurité relatives aux aides à la flottabilité, niveau de performance 50. Il s'applique aux aides à la flottabilité pour adultes et enfants d'une masse corporelle supérieure à 25 kg uniquement, pour une utilisation dans les eaux abritées.
Les aides à la flottabilité exigent une participation active de l'utilisateur lorsqu'il dispose d'une aide et d'un moyen de sauvetage à proximité.
Les EIF sous forme de vêtement ou combinaison à flottabilité inhérente une pièce ou deux pièces sont considérés comme des équipements à usage spécial conformément à l'ISO 12402-6:2020.

Osebni plavajoči pripomočki - 5. del: Vzgonska pomagala (nivo 50) - Varnostne zahteve (ISO 12402-5:2020)

General Information

Status
Published
Public Enquiry End Date
09-Sep-2015
Publication Date
12-Oct-2020
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
24-Sep-2020
Due Date
29-Nov-2020
Completion Date
13-Oct-2020

RELATIONS

Buy Standard

Standard
SIST EN ISO 12402-5:2020
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 12402-5:2020
01-november-2020
Nadomešča:
SIST EN ISO 12402-5:2006
SIST EN ISO 12402-5:2006/A1:2010
SIST EN ISO 12402-5:2006/AC:2007
Osebni plavajoči pripomočki - 5. del: Vzgonska pomagala (nivo 50) - Varnostne
zahteve (ISO 12402-5:2020)

Personal flotation devices - Part 5: Buoyancy aids (level 50) - Safety requirements (ISO

12402-5:2020)

Persönliche Auftriebsmittel - Teil 5: Schwimmhilfen (Stufe 50) - Sicherheitstechnische

Anforderungen (ISO 12402-5:2020)

Équipements individuels de flottabilité - Partie 5 : Aides à la flottabilité (niveau 50) -

Exigences de sécurité (ISO 12402-5:2020)
Ta slovenski standard je istoveten z: EN ISO 12402-5:2020
ICS:
13.340.70 Rešilni jopiči, vzgonska Lifejackets, buoyancy aids
pomagala in plavajoči and floating devices
pripomočki
SIST EN ISO 12402-5:2020 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 12402-5:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 12402-5:2020
EN ISO 12402-5
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2020
EUROPÄISCHE NORM
ICS 13.340.70 Supersedes EN ISO 12402-5:2006
English Version
Personal flotation devices - Part 5: Buoyancy aids (level
50) - Safety requirements (ISO 12402-5:2020)

Équipements individuels de flottabilité - Partie 5: Aides Persönliche Auftriebsmittel - Teil 5: Schwimmhilfen

à la flottabilité (niveau 50) - Exigences de sécurité (ISO (Stufe 50) - Sicherheitstechnische Anforderungen (ISO

12402-5:2020) 12402-5:2020)
This European Standard was approved by CEN on 10 June 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12402-5:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 12402-5:2020
EN ISO 12402-5:2020 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

Annex ZA (informative) Relationship between this European Standard and the essential

requirements of Regulation (EU) 2016/425 of the European Parliament and of the

Council of 9 March 2016 on personal protective equipment aimed to be covered................. 4

---------------------- Page: 4 ----------------------
SIST EN ISO 12402-5:2020
EN ISO 12402-5:2020 (E)
European foreword

This document (EN ISO 12402-5:2020) has been prepared by Technical Committee ISO/TC 188 "Small

craft" in collaboration with Technical Committee CEN/TC 162 “Protective clothing including hand and

arm protection and lifejackets” the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by March 2021, and conflicting national standards shall

be withdrawn at the latest by March 2021.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 12402-5:2006.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association, and supports essential requirements of EU Directive(s).

For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this

document.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 12402-5:2020 has been approved by CEN as EN ISO 12402-5:2020 without any

modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 12402-5:2020
EN ISO 12402-5:2020 (E)
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Regulation (EU) 2016/425 of the European Parliament and
of the Council of 9 March 2016 on personal protective equipment aimed to
be covered

This European Standard has been prepared under a Commission's standardization request to provide

one voluntary means of conforming to essential requirements of Regulation (EU) 2016/425 of the

European Parliament and of the Council of 9 March 2016 on personal protective equipment.

Once this standard is cited in the Official Journal of the European Union under that Regulation

(EU) 2016/425, compliance with the normative clauses of this standard given in Table ZA.1 confers,

within the limits of the scope of this standard, a presumption of conformity with the corresponding

essential requirements of that Regulation (EU) 2016/425 and associated EFTA regulations.

Table ZA.1 — Correspondence between this European Standard and Regulation (EU) 2016/425

Essential Requirements of Regulation Clause(s)/sub-clause(s) of Remarks/
(EU) 2016/425 this EN Notes
1.1.1 Ergonomics 5.6
1.1.2.1 Optimum level of protection 5.6
1.1.2.2 Classes of protection appropriate to
4.2
different levels of risk
1.2.1 Absence of inherent risks and other 5.1.3; 5.1.5; 5.1.7; 5.2; 5.3.1.2;
nuisance factors 5.3.2.2; 5.3.2.3; 5.3.4.3;
5.3.4.4; 5.6.1.2; 5.6.1.4;
5.6.1.7; 5.6.1.8; 5.6.1.9;
5.6.1.10; 5.6.1.11
1.2.1.1 Suitable constituent materials 5.1
1.2.1.2 Satisfactory surface condition of all PPE
5.1
parts in contact with the user
1.2.1.3 Maximum permissible user impediment 5.6.1.3
1.3.1 Adaption of PPE to user morphology 5.6.2
1.3.2 Lightness and design strength 5.3.2.1; 5.3.3.1; 5.5; 5.6.1.6
1.4 Manufacturer's instructions and
5.1.6; 5.3.4.1; 6.2; 7; 8
information
2.1 PPE incorporating adjustment systems 5.1.3
2.4 PPE subject to ageing 6.2 l)
2.8 PPE for intervention in very dangerous
5.1.4
situations
---------------------- Page: 6 ----------------------
SIST EN ISO 12402-5:2020
EN ISO 12402-5:2020 (E)
2.12 PPE bearing one or more identification
markings or indicators directly or 6
indirectly relating to health and safety
3.4.2 Buoyancy aids 5.1.2; 5.2; 5.3.1.1; 5.3.2.2.;
5.3.4.2; 5.3.4.4; 5.6.3; 5.7

WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European

Standard is maintained in the list published in the Official Journal of the European Union. Users of this

standard should consult frequently the latest list published in the Official Journal of the European

Union.

WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of

this standard.
---------------------- Page: 7 ----------------------
SIST EN ISO 12402-5:2020
---------------------- Page: 8 ----------------------
SIST EN ISO 12402-5:2020
INTERNATIONAL ISO
STANDARD 12402-5
Second edition
2020-07
Personal flotation devices —
Part 5:
Buoyancy aids (level 50) — Safety
requirements
Équipements individuels de flottabilité —
Partie 5: Aides à la flottabilité (niveau 50) — Exigences de sécurité
Reference number
ISO 12402-5:2020(E)
ISO 2020
---------------------- Page: 9 ----------------------
SIST EN ISO 12402-5:2020
ISO 12402-5:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 12402-5:2020
ISO 12402-5:2020(E)
Contents Page

Foreword ..........................................................................................................................................................................................................................................v

Introduction ................................................................................................................................................................................................................................vi

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Classification of PFDs ....................................................................................................................................................................................... 4

4.1 Classes ............................................................................................................................................................................................................ 4

4.1.1 Buoyancy aids ..................................................................................................................................................................... 4

4.1.2 Lifejackets .............................................................................................................................................................................. 4

4.1.3 Special application PFDs ........................................................................................................................................... 4

4.2 Performance levels .............................................................................................................................................................................. 4

4.2.1 Level 50 .................................................................................................................................................................................... 4

4.2.2 Level 100................................................................................................................................................................................. 5

4.2.3 Level 150................................................................................................................................................................................. 5

4.2.4 Level 275................................................................................................................................................................................. 5

5 Requirements .......................................................................................................................................................................................................... 5

5.1 General ........................................................................................................................................................................................................... 5

5.1.1 Materials and components ...................................................................................................................................... 5

5.1.2 Means of inflation .................. .................................................... ...................................................................................... 6

5.1.3 Body strap and lacing ends requirements ................................................................................................. 6

5.1.4 Inflation Status Indicators ....................................................................................................................................... 6

5.1.5 Ride-up prevention system ..................................................................................................................................... 7

5.1.6 Rearming and repacking information ........................................................................................................... 7

5.1.7 Oral inflation ........................................................................................................................................................................ 7

5.1.8 Magnetic properties ...................................................................................................................................................... 7

5.2 Combination of buoyancy aids and accessories ......................................................................................................... 7

5.3 Types of buoyancy ......... ....................................................................................................................................................................... 8

5.3.1 General...................................................................................................................................................................................... 8

5.3.2 Inflatable buoyancy chambers ............................................................................................................................. 8

5.3.3 Inherently buoyant material .................................................................................................................................. 8

5.3.4 Total buoyancy provided .......................................................................................................................................... 9

5.3.5 Buoyancy retention factor (V-factor method) ........................................................................................ 9

5.4 Conspicuousness ................................................................................................................................................................................11

5.4.1 Colour .....................................................................................................................................................................................11

5.4.2 Retroreflective material ..........................................................................................................................................11

5.5 Strength ......................................................................................................................................................................................................11

5.6 Performance ...........................................................................................................................................................................................11

5.6.1 General...................................................................................................................................................................................11

5.6.2 Donning, adjustment and fit ...............................................................................................................................12

5.6.3 In-water performance ..............................................................................................................................................13

5.7 Multi-chamber buoyancy systems ......................................................................................................................................13

6 Marking .......................................................................................................................................................................................................................14

6.1 General ........................................................................................................................................................................................................14

6.2 Information on the buoyancy aid .........................................................................................................................................14

7 Information supplied by the manufacturer ..........................................................................................................................15

8 Consumer information at point of sale ......................................................................................................................................16

8.1 General ........................................................................................................................................................................................................16

8.2 Plain text version................................................................................................................................................................................16

8.3 Data list .......................................................................................................................................................................................................18

8.4 Marking information .......................................................................................................................................................................19

8.5 Colour-code .............................................................................................................................................................................................19

© ISO 2020 – All rights reserved iii
---------------------- Page: 11 ----------------------
SIST EN ISO 12402-5:2020
ISO 12402-5:2020(E)

Bibliography .............................................................................................................................................................................................................................21

iv © ISO 2020 – All rights reserved
---------------------- Page: 12 ----------------------
SIST EN ISO 12402-5:2020
ISO 12402-5:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 188, Small craft, Subcommittee SC 1,

Personal safety equipment.

This second edition cancels and replaces the first edition (ISO 12402-5:2006), which has been

technically revised. It also incorporates the Amendment ISO 12402-5:2005/Amd. 1:2010.

The main changes compared to the previous edition are as follows:
a) new terms and definitions added;
b) level 50 was modified (see 4.2.1);
c) general requirements were modified (see 5.1);
d) requirements for lifting loops were moved to ISO 12402-8:2020;

e) requirement for different types of buoyancy were modified (see 5.3 and Table 2);

f) requirements on strength were added (see 5.5);
g) requirements on performance were modified (see 5.6).
A list of all parts in the ISO 12402 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
© ISO 2020 – All rights reserved v
---------------------- Page: 13 ----------------------
SIST EN ISO 12402-5:2020
ISO 12402-5:2020(E)
Introduction

ISO 12402 (all parts):2020 deals with personal floatation devices (PFDs) for persons engaged in

activities, whether in relation to their work or their leisure, in or near water. PFDs manufactured,

selected, and maintained to this International Standard give a reasonable assurance of safety from

drowning to a person who is immersed in water. ISO 12402 (all parts):2020 does not include the

following:

— requirements for lifejackets on seagoing ships, which are regulated by the International Maritime

Organization (IMO) under the International Convention for the Safety of Life at Sea (SOLAS);

— throwable devices and flotation cushions.

ISO 12402 (all parts):2020 allows for the buoyancy of a PFD to be provided by a variety of materials or

designs, some of which can require preparation before entering the water (e.g. inflation of chambers by

gas from a cylinder or blown in orally). PFDs can be divided into the following two main classes:

— those which provide face up in-water support to the user regardless of physical conditions

(lifejackets), and

— those which require the user to make swimming and other postural movements to position the user

with the face out of the water (buoyancy aids).

Within these main two classes there are a number of levels of support, types of buoyancy, activation

methods for inflatable devices, and auxiliary items (such as location aids), which all affect the user‘s

probability of survival. Within the different types of buoyancy allowed, inflatable PFDs either provide

full buoyancy without any user intervention other than arming (i.e. PFDs inflated by a fully automatic

method) or require the user to initiate the inflation. Hybrid PFDs always provide some buoyancy but

rely on the same methods as inflatable PFDs to achieve full buoyancy. With inherently buoyant PFDs,

the user only needs to put the PFD on to achieve the performance of its class.

PFDs that do not require intervention (automatically operating PFDs) are suited to activities where

persons are likely to enter the water unexpectedly; whereas PFDs requiring intervention (e.g. manually

inflated PFDs) are only suitable for use if the user believes there will be sufficient time to produce

full buoyancy, if automatic operation would result in entrapment, or if help is close at hand. In every

circumstance, the user should ensure that the operation of the PFD is suited to the specific application.

The conformity of a PFD to this part of the ISO 12402 series: 2020 does not imply that it is suitable for

all circumstances. The relative amount of required inspection and maintenance is another factor of

paramount importance in the choice and application of specific PFDs.

ISO 12402 (all parts):2020 is intended to serve as a guide to manufacturers, purchasers, and users of

such safety equipment in ensuring that the equipment provides an effective standard of performance in

use. Equally essential is the need for the designer to encourage the wearing of the equipment by making

it comfortable and attractive for continuous wear on or near water, rather than for it to be stored in

a locker for emergency use. The primary function of a PFD is to support the user in reasonable safety

in the water. Within the two classes, alternative attributes make some PFDs better suited to some

circumstances than others or make them easier to use and care for than others. Important alternatives

provided by ISO 12402 (all parts):2020 are the following:

— to provide higher levels of support (levels 100, 150, or 275) that generally float the user with greater

water clearance, when required for increasingly severe conditions; or to provide lighter or less

bulky PFDs (levels 50 or 100);

— to provide the kinds of flotation (inherently buoyant foam, hybrid, and inflatable) that

accommodate the sometimes conflicting needs of reliability and durability, in-water performance,

and continuous wear;

1) The International Maritime Organization (IMO) is an institution with domicile in London issuing regulations

which are then published as laws by its Member States.
vi © ISO 2020 – All rights reserved
---------------------- Page: 14 ----------------------
SIST EN ISO 12402-5:2020
ISO 12402-5:2020(E)

— to provide automatically operating (inherently buoyant or automatically inflated) PFDs that float

users without any intervention on their part, except in initially donning the PFD (and regular

inspection and rearming of inflatable types), or to provide user control of the inflatable PFDs

buoyancy by manual and oral operation; and
— to assist in detection (location aids) and recovery of the user.

PFDs provide various degrees of buoyancy in garments that are light in weight and only as bulky and

restrictive as needed for their intended use. They need to be secure when worn, in order to provide

positive support in the water and to allow users to swim or actively assist themselves or others. The

PFD selected ensures that the user is supported with the mouth and nose clear of the water under the

expected conditions of use and the user’s ability to assist.

Under certain conditions (such as rough water and waves), the use of watertight and multilayer clothing,

which provide (intentionally or otherwise) additional buoyancy, or the use of equipment with additional

weight (such as tool belts) can alter the performance of the PFD. Users, owners and employers need to

ensure that this is taken into account when selecting a PFD. Similarly, it is possible that PFDs do not

perform as well in extremes of temperature, although meeting ISO 12402 (all parts):2020 requirements.

PFDs can also be affected by other conditions of use, such as chemical exposure and welding, and can

require additional protection to meet the specific requirements of use. Taking a PFD into such conditions

necessitates the assurance that the PFD will not be adversely affected. ISO 12402 (all parts):2020 also

allows a PFD to be an integral part of a safety harness designed to conform to ISO 12401:2009, or an

integral part of a garment with other uses, for example to provide thermal protection during immersion,

in which case the complete assembly as used is expected to conform to ISO 12402 (all parts):2020.

In compiling the attributes required of a PFD, consideration has also been given to the potential length

of service that the user might expect. Whilst a PFD needs to be of substantial construction and material,

its potential length of service often depends on the conditions of use and storage, which are the

responsibility of the owner, user and/or employer. Furthermore, whilst the performance tests included

are believed to assess relevant aspects of performance in real-life use, they do not accurately simulate

all conditions of use. For example, the fact that a device passes the self-righting tests in sw

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.