SIST EN 13522:2004
(Main)Footwear - Test methods for uppers - Tensile strength and elongation
Footwear - Test methods for uppers - Tensile strength and elongation
This standard specifies a test method for determining the force required to break a test specimen from uppers irrespective of the material, in order to asses the suitability for the end use.
Schuhe - Prüfverfahren für Obermaterialien - Bruchfestigkeit und Bruchdehnung
Diese Europäische Norm legt ein werkstoffunabhängiges Prüfverfahren zur Bestimmung der Kraft fest, die erforderlich ist, um ein vom Obermaterial genommenes Prüfstück zu zerreißen, um die Gebrauchseigenschaften im fertigen Zustand zu bestimmen.
Chaussures - Méthodes d'essai des tiges - Résistance a la rupture et allongement
Le présent projet de norme spécifie une méthode d'essai permettant de déterminer la force nécessaire pour provoquer la rupture d'une éprouvette prélevée sur des tiges, quel que soit le materiau qui les compose, afin d'évaluer si ces tiges conviennent a l'utilisation finale.
Footwear - Test methods for uppers - Tensile strength and elongation
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Footwear - Test methods for uppers - Tensile strength and elongationSchuhe - Prüfverfahren für Obermaterialien - Bruchfestigkeit und BruchdehnungChaussures - Méthodes d'essai des tiges - Résistance a la rupture et allongementFootwear - Test methods for uppers - Tensile strength and elongation61.060ObuvalaFootwearICS:Ta slovenski standard je istoveten z:EN 13522:2001SIST EN 13522:2004en01-januar-2004SIST EN 13522:2004SLOVENSKI
STANDARD
SIST EN 13522:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13522December 2001ICS 61.060English versionFootwear - Test methods for uppers - Tensile strength andelongationChaussures - Méthodes d'essai des tiges - Résistance à larupture et allongementSchuhe - Prüfverfahren für Obermaterialien - Zugfestigkeitund BruchdehnungThis European Standard was approved by CEN on 16 November 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13522:2001 ESIST EN 13522:2004
EN 13522:2001 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Apparatus and material.55Sampling and conditioning.56Test method.66.1Principle.66.2Procedure.67Expression of results.78Test report.7SIST EN 13522:2004
EN 13522:2001 (E)3ForewordThis European Standard has been prepared by Technical Committee CEN/TC 309 "Footwear", the secretariat ofwhich is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by June 2002, and conflicting national standards shall be withdrawn at the latest byJune 2002.This European Standard is based on the IULTCS/IUP 6 method (the International Standard ISO 3376:1976"Leather. Determination of tensile strength and elongation").According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,Switzerland and the United Kingdom.SIST EN 13522:2004
EN 13522:2001 (E)41 ScopeThis standard specifies a test method for determining the force required to break a test specimen from uppersirrespective of the material, in order to asses the suitability for the end use.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 12222, Footwear - Standard atmospheres for conditioning and testing of footwear and components forfootwear.EN ISO 7500-1, Metallic materials – Verification of static uniaxial testing machines - Part 1: Tension/compressiontesting machines (ISO 7500-1:1999).EN 13400, Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces.prEN 12987, Leather - Chemical, physical and mechanical and fastness tests – Sampling.3 Terms and definitionsFor the purposes of this European Standard, the following terms and definitions apply.3.1breaking strengthmaximum tensile stress recorded in extending a test piece to breaking point3.2tensile elongationtensile strain in the test length at breaking3.3uppermaterials forming the outer face of the footwear which is attached to the sole assembly and covers the upper dorsalsurface of the foot. In the case of boots this also includes the outer face of the material covering the leg. Only thematerial
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.