SIST EN 60603-7-1:2010
(Main)Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors (IEC 60603-7-1:2009)
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors (IEC 60603-7-1:2009)
This part of IEC 60603-7 covers 8-way shielded free and fixed connectors. It specifies the dimensions, mechanical, electrical and environmental characteristics and tests, in relation to the shield, additional to those in IEC 60603-7. These connectors are intermateable and interoperable with other IEC 60603-7 series connectors as defined in IEC 60603-7.
Steckverbinder für elektronische Einrichtungen - Teil 7-1: Bauartspezifikation für geschirmte freie und feste Steckverbinder, 8polig (IEC 60603-7-1:2009)
Connecteurs pour équipements électroniques - Partie 7-1: Spécification particulière pour les fiches et les embases écrantés à 8 voies (CEI 60603-7-1:2009)
La CEI 60603-7-1:2009 concerne un système de fiches et d'embases blindés à 8 voies. Elle spécifie les dimensions, les environnements mécaniques, électriques et de tenue à l'environnement, ainsi que les tests relatifs à l'écran, en complément de la CEI 60603-7. Ces connecteurs sont accouplables et interopérables avec les autres connecteurs de la série CEI 60603-7, comme défini dans la CEI 60603-7. Cette nouvelle édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - les dimensions fondamentales des connecteurs et d'autres éléments d'information ont été enlevés et référence est faite à la CEI 60603-7; - les caractéristiques électriques et les séquences d'essais ont été revues.
Konektorji za elektronsko opremo - 7-1. del: Podrobna specifikacije za 8-redne, zaslonjene, proste in fiksne konektorje (IEC 60603-7-1:2009)
Ta del IEC 60603-7 zajema 8-redne zaslonjene proste in fiksne konektorje. Določa mere, mehanske, električne in okoljske značilnosti in preskuse v zvezi z zaščito, poleg tistih, ki so navedeni v IEC 60603-7. Ti konektorji so medsebojno združljivi in interoperabilni z drugimi konektorji serije IEC 60603-7, kot jih določa IEC 60603-7.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60603-7-1:2010
01-januar-2010
1DGRPHãþD
SIST EN 60603-7-1:2003
Konektorji za elektronsko opremo - 7-1. del: Podrobna specifikacije za 8-redne,
zaslonjene, proste in fiksne konektorje (IEC 60603-7-1:2009)
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded,
free and fixed connectors (IEC 60603-7-1:2009)
Steckverbinder für elektronische Einrichtungen - Teil 7-1: Bauartspezifikation für
geschirmte freie und feste Steckverbinder, 8polig (IEC 60603-7-1:2009)
Connecteurs pour équipements électroniques - Partie 7-1: Spécification particulière pour
les fiches et les embases écrantés à 8 voies (CEI 60603-7-1:2009)
Ta slovenski standard je istoveten z: EN 60603-7-1:2009
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 60603-7-1:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60603-7-1:2010
---------------------- Page: 2 ----------------------
SIST EN 60603-7-1:2010
EUROPEAN STANDARD
EN 60603-7-1
NORME EUROPÉENNE
November 2009
EUROPÄISCHE NORM
ICS 31.220.10 Supersedes EN 60603-7-1:2002
English version
Connectors for electronic equipment -
Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors
(IEC 60603-7-1:2009)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Partie 7-1: Spécification particulière Teil 7-1: Bauartspezifikation
pour les fiches et les embases blindées für geschirmte freie und feste
à 8 voies Steckverbinder, 8polig
(CEI 60603-7-1:2009) (IEC 60603-7-1:2009)
This European Standard was approved by CENELEC on 2009-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60603-7-1:2009 E
---------------------- Page: 3 ----------------------
SIST EN 60603-7-1:2010
EN 60603-7-1:2009 – 2 –
Foreword
The text of document 48B/2004/FDIS, future edition 2 of IEC 60603-7-1, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60603-7-1 on 2009-09-01
This European Standard supersedes EN 60603-7-1:2002.
EN 60603-7-1:2009 includes the following significant technical changes with respect to
EN 60603-7-1:2002:
– the basic connector dimensions were removed from EN 60603-7-1:2002 and referenced to
EN 60603-7;
– several other subclauses were removed (e.g. 4.1, 5, 6.1, 6.2) from EN 60603-7-1:2002 and referenced
to EN 60603-7;
– the electrical characteristics, Subclause 6.4, were revised;
– the test schedules were revised.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60603-7-1:2009 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 4 ----------------------
SIST EN 60603-7-1:2010
– 3 – EN 60603-7-1:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1)
- - Communication cables - Specifications for EN 50289-1-14 -
test methods -
Part 1-14: Electrical test methods - Coupling
attenuation or screening attenuation of
connecting hardware
1)
IEC 60068-2-38 - Environmental testing - EN 60068-2-38 2009
Part 2-38: Tests - Test Z/AD: Composite
temperature/humidity cyclic test
IEC 60512 Series Connectors for electronic equipment - Tests EN 60512 Series
and measurements
1) 2)
IEC 60512-1-100 - Connectors for electronic equipment - Tests EN 60512-1-100 2006
and measurements -
Part 1-100: General - Applicable publications
IEC 60603-7 Series Connectors for electronic equipment - EN 60603-7 Series
Part 7: Detail specifications for 8-way free and
fixed connectors
IEC 60603-7 2008 Connectors for electronic equipment - EN 60603-7 2009
Part 7: Detail specification for 8-way,
unshielded, free and fixed connectors
1) 2)
IEC 60664-1 - Insulation coordination for equipment within EN 60664-1 2007
low-voltage systems -
Part 1: Principles, requirements an tests
1)
IEC 61156-5 - Multicore and symmetrical pair/quad cables - -
for digital communications -
Part 5: Symmetrical pair/quad cables with
transmission characteristics up to 1 000 MHz -
Horizontal floor wiring - Sectional specification
1) 2)
ISO 1302 - Geometrical Product Specifications (GPS) - EN ISO 1302 2002
Indication of surface texture in technical
product documentation
1)
Undated reference.
2)
Valid edition at date of issue.
---------------------- Page: 5 ----------------------
SIST EN 60603-7-1:2010
---------------------- Page: 6 ----------------------
SIST EN 60603-7-1:2010
IEC 60603-7-1
®
Edition 2.0 2009-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Connectors for electronic equipment –
Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors
Connecteurs pour équipements électroniques –
Partie 7-1: Spécification particulière pour les fiches et les embases blindés à
8 voies
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
T
CODE PRIX
ICS 31.220.10 ISBN 2-8318-1041-9
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 60603-7-1:2010
– 2 – 60603-7-1 © IEC:2009
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 General .7
2 Terms and definitions .7
3 Common features and isometric view .8
3.1 Isometric view .8
3.2 Mating information.8
3.2.1 General .8
3.2.2 Fixed connector.9
3.2.3 Free connector .10
4 Cable terminations and internal connections – Fixed and free connectors .11
4.1 Internal connections .11
4.2 Cable termination .11
5 Gauges .11
6 Characteristics .11
6.1 General .11
6.2 Pin and pair grouping assignment .11
6.3 Classification into climatic category.11
6.4 Electrical characteristics.12
6.4.1 Creepage and clearance distances.12
6.4.2 Voltage proof.12
6.4.3 Current-carrying capacity.12
6.4.4 Initial contact resistance – interface only (between separable fixed
and free connectors).12
6.4.5 Input to output d.c. resistance .12
6.4.6 Initial insulation resistance .13
6.4.7 Transfer impedance.13
6.4.8 Coupling attenuation.13
6.5 Mechanical.13
6.5.1 Mechanical operation .13
6.5.2 Insertion and withdrawal forces .13
7 Tests and test schedule.13
7.1 General .13
7.2 Arrangement for contact resistance tests.14
7.3 Arrangement for vibration tests.14
7.4 Test procedures and measuring methods .14
7.5 Preconditioning .14
7.6 Wiring and mounting of specimens .14
7.6.1 Wiring.14
7.6.2 Mounting .14
7.7 Test schedules .14
7.7.1 Basic (minimum) test schedule .14
7.7.2 Full test schedule .14
Annex A (normative) Gauging continuity test.21
Bibliography.25
---------------------- Page: 8 ----------------------
SIST EN 60603-7-1:2010
60603-7-1 © IEC:2009 – 3 –
Figure 1 – IEC 60603-7 document structure.6
Figure 2 – Isometric view .8
Figure 3 – Fixed connector details .9
Figure 4 – Free connector view.10
Figure A.1 – Gauge.23
Figure A.2 – Gauge insertion .24
Table 1 – Dimensions for Figure 3 .10
Table 2 – Dimensions for Figure 4 .11
Table 3 – Creepage and clearance distances.12
Table 4 – Test group P .15
Table 5 – Test group AP .16
Table 6 – Test group BP .17
Table 7 – Test group CP .18
Table 8 – Test group DP .19
Table 9 – Test group GP.20
Table A.1 – Dimensions for Figure A.1.22
---------------------- Page: 9 ----------------------
SIST EN 60603-7-1:2010
– 4 – 60603-7-1 © IEC:2009
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_____________
CONNECTORS FOR ELECTRONIC EQUIPMENT –
Part 7-1: Detail specification for 8-way, shielded,
free and fixed connectors
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60603-7-1 has been prepared by subcommittee 48B: Connectors,
of IEC technical committee 48: Electromechanical components and mechanical structures for
electronic equipment.
This second edition cancels and replaces the first edition published in 2002. This edition
constitutes a technical revision.
This edition included the following significant technical changes with respect to the previous
edition:
1) The basic connector dimensions were removed from the edition 1 standard and referenced
to IEC 60603-7.
2) Several other subclauses were removed (e.g. 4.1, 5, 6.1, 6.2) from the edition 1 standard
and referenced to IEC 60603-7.
3) The electrical characteristics, subclause 6.4, was revised.
4) The test schedules were revised.
---------------------- Page: 10 ----------------------
SIST EN 60603-7-1:2010
60603-7-1 © IEC:2009 – 5 –
The text of this standard is based on the following documents:
FDIS Report on voting
48B/2004/FDIS 48B/2038/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 60603 series, under the general title Connectors for electronic
equipment, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 11 ----------------------
SIST EN 60603-7-1:2010
– 6 – 60603-7-1 © IEC:2009
INTRODUCTION
Applications have emerged which require the use of the interface described in IEC 60603-7 with
certain performance specifications at higher frequencies. Therefore, a series of detail
specifications have been issued the past few years in support of these new applications. In
order to improve readability and ease of maintenance, IEC Subcommittee 48B (SC 48B)
decided to rearrange and restructure these existing documents.
This part of IEC 60603-7 contains only the necessary information regarding the shield of the
connection and is designed to be used as a base document for all shielded connectors in the
IEC 60603-7 series.
For further information regarding the IEC 60603-7 style connection, reference to the
unshielded base document IEC 60603-7 is made.
IEC 60603-7 is the base specification of the whole series. Subsequent specifications do not
duplicate information given in the base document, but list only additional requirements. For a
complete specification regarding a component of a higher number document, all lower
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.