SIST EN ISO 10664:2006
(Main)Hexalobular internal driving feature for bolts and screws (ISO 10664:2005)
Hexalobular internal driving feature for bolts and screws (ISO 10664:2005)
This International Standard specifies the shape and basic dimensions of the hexalobular internal driving feature for bolts and screws, including the gauging method. The curvature of the contour of the hexalobular internal driving feature is defined by the gauges specified in Tables 3, 4 and 5. Additional information which can be used when drawing the contour is given in Annex A. The intent of this International Standard is to provide the details necessary for inspection of the hexalobular driving feature. It is not suitable for, nor intended to be used as, a manufacturing standard.
Innensechsrund für Schrauben (ISO 10664:2005)
Empreinte a six lobes internes pour vis (ISO 10664:2005)
L'ISO 10664:2005 spécifie la géométrie et les dimensions fondamentales de l'empreinte à six lobes internes pour les vis, ainsi que le contrôle par jauge de l'empreinte.
L'ISO 10664:2005 est destinée à fournir les précisions nécessaires au contrôle de l'empreinte à six lobes internes. Elle ne s'applique pas en tant que norme de fabrication, et elle n'est pas destinée à être utilisée dans ce but.
Notranja šestobla luknja za vijake (ISO 10664:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10664:2006
01-maj-2006
Notranja šestobla luknja za vijake (ISO 10664:2005)
Hexalobular internal driving feature for bolts and screws (ISO 10664:2005)
Innensechsrund für Schrauben (ISO 10664:2005)
Empreinte a six lobes internes pour vis (ISO 10664:2005)
Ta slovenski standard je istoveten z: EN ISO 10664:2005
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN ISO 10664:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10664:2006
---------------------- Page: 2 ----------------------
SIST EN ISO 10664:2006
EUROPEAN STANDARD
EN ISO 10664
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2005
ICS 21.060.10 Supersedes EN ISO 10664:1999
English Version
Hexalobular internal driving feature for bolts and screws (ISO
10664:2005)
Empreinte à six lobes internes pour vis (ISO 10664:2005) Innensechsrund für Schrauben (ISO 10664:2005)
This European Standard was approved by CEN on 20 June 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10664:2005: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10664:2006
EN ISO 10664:2005 (E)
Foreword
This document (EN ISO 10664:2005) has been prepared by Technical Committee ISO/TC 2
"Fasteners" in collaboration with Technical Committee CEN/TC 185 "Threaded and non-
threaded mechanical fasteners and accessories", the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by January 2006, and conflicting national
standards shall be withdrawn at the latest by January 2006.
This document supersedes EN ISO 10664:1999.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 10664:2005 has been approved by CEN as EN ISO 10664:2005 without any
modifications.
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10664:2006
INTERNATIONAL ISO
STANDARD 10664
Second edition
2005-07-01
Hexalobular internal driving feature
for bolts and screws
Empreinte à six lobes internes pour vis
Reference number
ISO 10664:2005(E)
©
ISO 2005
---------------------- Page: 5 ----------------------
SIST EN ISO 10664:2006
ISO 10664:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved
---------------------- Page: 6 ----------------------
SIST EN ISO 10664:2006
ISO 10664:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10664 was prepared by Technical Committee ISO/TC 2, Fasteners.
This second edition cancels and replaces the first edition (ISO 10664:1999), which has been technically
revised.
© ISO 2005 – All rights reserved iii
---------------------- Page: 7 ----------------------
SIST EN ISO 10664:2006
---------------------- Page: 8 ----------------------
SIST EN ISO 10664:2006
INTERNATIONAL STANDARD ISO 10664:2005(E)
Hexalobular internal driving feature for bolts and screws
1 Scope
This International Standard specifies the shape and basic dimensions of the hexalobular internal driving
feature for bolts and
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.