Connectors for electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever (IEC 60512-8-3:2018)

This part of IEC 60512, when required by the detail (product) specification, is used for testing
connectors within the scope of IEC technical committee 48. It may also be used for similar
devices, when specified in a detail (product) specification.
The object of this document is to detail a standard test method to assess the robustness of
the actuating lever of a connector mating or release mechanism.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 8-3: Prüfungen mit statischer Last (feste Steckverbinder) - Prüfung 8c: Mechanische Widerstandsfähigkeit des Betätigungshebels (IEC 60512-8-3:2018)

Connecteurs pour équipements électroniques - Essais et mesures - Partie 8-3: Essais de charge statique (embases) - Essai 8c: Robustesse de l’ergot d’activation (IEC 60512-8-3:2018)

IEC 60512-8-3:2018 Lorsque la spécification particulière (de produit) l’exige, la présente partie de l'IEC 60512 est utilisée pour les essais des connecteurs qui entrent dans le domaine d’application du comité d’études 48 de l'IEC. Elle peut aussi être utilisée pour des dispositifs similaires, lorsqu’une spécification particulière (de produit) le spécifie.
L’objet de ce document est de détailler une méthode d’essai normalisée pour évaluer la robustesse de l’ergot d’activation d’un mécanisme d’accouplement ou de relâchement de la connexion.
Cette deuxième édition annule et remplace la première édition parue en 2011. La présente édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: La présente édition reflète l'IEC 60512-1-101, Spécification particulière cadre et le paragraphe 4.2 (Préparation du spécimen) est amélioré.
Mots clés: connecteurs, Essais de charge statique (embases)

Konektorji za električno in elektronsko opremo - Preskusi in meritve - 8-3. del: Preskušanje s statično obremenitvijo (fiksni konektorji) - Preskus 8c: Robustnost vzvoda (IEC 60512-8-3:2018)

Ta del standarda IEC 60512 se uporablja, če tako zahteva podrobna specifikacija (izdelka), za preskušanje konektorjev na področju uporabe tehničnega odbora IEC 48. Lahko se uporablja tudi za podobne elemente, če je tako določeno v podrobni specifikaciji (izdelka).
Cilj tega dokumenta je podrobno opisati standardno preskusno metodo za ocenjevanje robustnosti ročice za aktivacijo stiskanja konektorja ali mehanizma za izpust.

General Information

Status
Published
Publication Date
12-Apr-2018
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
28-Mar-2018
Due Date
02-Jun-2018
Completion Date
13-Apr-2018

Relations

Buy Standard

Standard
EN IEC 60512-8-3:2018
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60512-8-3:2018
01-maj-2018
1DGRPHãþD
SIST EN 60512-8-3:2011
.RQHNWRUML]DHOHNWULþQRLQHOHNWURQVNRRSUHPR3UHVNXVLLQPHULWYHGHO
3UHVNXãDQMHVVWDWLþQRREUHPHQLWYLMR ILNVQLNRQHNWRUML 3UHVNXVF5REXVWQRVW
Y]YRGD ,(&
Connectors for electronic equipment - Tests and measurements - Part 8-3: Static load
tests (fixed connectors) - Test 8c: Robustness of actuating lever (IEC 60512-8-3:2018)
Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 8-3:
Prüfungen mit statischer Last (feste Steckverbinder) - Prüfung 8c: Mechanische
Widerstandsfähigkeit des Betätigungshebels (IEC 60512-8-3:2018)
Connecteurs pour équipements électroniques - Essais et mesures - Partie 8-3: Essais de
charge statique (embases) - Essai 8c: Robustesse de l’ergot d’activation (IEC 60512-8-
3:2018)
Ta slovenski standard je istoveten z: EN IEC 60512-8-3:2018
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN IEC 60512-8-3:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 60512-8-3:2018

---------------------- Page: 2 ----------------------

SIST EN IEC 60512-8-3:2018


EUROPEAN STANDARD EN IEC 60512-8-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2018
ICS 31.220.01 Supersedes EN 60512-8-3:2011
English Version
Connectors for electrical and electronic equipment - Tests and
measurements - Part 8-3: Static load tests (fixed connectors) -
Test 8c: Robustness of actuating lever
(IEC 60512-8-3:2018)
Connecteurs pour équipements électroniques - Essais et Steckverbinder für elektrische und elektronische
mesures - Partie 8-3: Essais de charge statique (embases) Einrichtungen - Mess- und Prüfverfahren - Teil 8-3:
- Essai 8c: Robustesse de l'ergot d'activation Prüfungen mit statischer Last (feste Steckverbinder) -
(IEC 60512-8-3:2018) Prüfung 8c: Mechanische Widerstandsfähigkeit des
Betätigungshebels
(IEC 60512-8-3:2018)
This European Standard was approved by CENELEC on 2018-02-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60512-8-3:2018 E

---------------------- Page: 3 ----------------------

SIST EN IEC 60512-8-3:2018
EN IEC 60512-8-3:2018 (E)
European foreword
The text of document 48B/2615/FDIS, future edition 2 of IEC 60512-8-3, prepared by IEC/SC 48B
"Electrical connectors, of IEC technical committee 48: Electrical connectors and mechanical structures
for electrical and electronic equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60512-8-3:2018.

The following dates are fixed:
• latest date by which the document has to be (dop) 2018-11-16
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2021-02-16
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60512-8-3:2011.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60512-8-3:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60512-14 (series) NOTE Harmonized as EN 60512-14 (series).
IEC 60529 NOTE Harmonized as EN 60529.
2

---------------------- Page: 4 ----------------------

SIST EN IEC 60512-8-3:2018
EN IEC 60512-8-3:2018 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.

NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60512-1 -  Connectors for electronic equipment - EN 60512-1 -
Tests and measurements - Part 1: General
IEC 60512-1-1 -  Connectors for electronic equipment - EN 60512-1-1 -
Tests and measurements - Part 1-1:
General examination - Test 1a: Visual
examination


3

---------------------- Page: 5 ----------------------

SIST EN IEC 60512-8-3:2018

---------------------- Page: 6 ----------------------

SIST EN IEC 60512-8-3:2018



IEC 60512-8-3

®


Edition 2.0 2018-01




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Connectors for electrical and electronic equipment – Tests and measurements –

Part 8-3: Static load tests (fixed connectors) – Test 8c: Robustness of actuating

lever



Connecteurs pour équipements électriques et électroniques – Essais et mesures –

Partie 8-3: Essais de charge statique (embases) – Essai 8c: Robustesse de l'ergot


d'activation













INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 31.220.01 ISBN 978-2-8322-5255-0



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN IEC 60512-8-3:2018
– 2 – IEC 60512-8-3:2018 © IEC 2018
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Preparations . 5
4.1 Test equipment . 5
4.2 Preparation of specimen . 5
4.3 Mounting of specimen . 6
5 Test / measuring method . 6
5.1 Pre-conditioning . 6
5.2 Initial measurements . 6
5.3 Tests . 6
5.4 Recovery . 7
5.5 Final measurements . 7
6 Details to be specified . 8
Bibliography . 9

Figure 1 – Details of force application . 7

---------------------- Page: 8 ----------------------

SIST EN IEC 60512-8-3:2018
IEC 60512-8-3:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT –
TESTS AND MEASUREMENTS –

Part 8-3: Static load tests (fixed connectors) –
Test 8c: Robustness of actuating lever

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standar
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.