SIST EN ISO 10360-4:2000/AC:2004

Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode (ISO 10360-4:2000/Cor.1:2002)

stari naslov:Specifikacije geometričnih proizvodov (SGP) - Odobritev in preskusi ponovne overitve za koordinirano merjenje strojev - 4. del: Koordinirano merjenje strojev z uporabo načina merjenja s preslikavo (ISO 10360-4:2000/Cor.1:2002)
34. sestanek, 2008-11-20

Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 4: KMG in Scanningmodus (ISO 10360-4:2000/Cor.1:2002)

Spécification géometrique des produits (GPS) - Essais de réception et de vérification périodique des machines a mesurer tridimensionnelles (MMT) - Partie 4: MMT utilisées en mode de mesure par scanning (ISO 10360-4:2000/Cor.1:2002)

Specifikacija geometrijskih veličin izdelka - Preskusi za sprejemljivost in ponovno overjanje koordinatnih merilnih strojev (KMS) - 4. del: Koordinirano merjenje strojev z uporabo načina merjenja s preslikavo (ISO 10360-4:2000/Cor.1:2002)

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-2004
• Withdrawal Date: 25-May-2020
• ICS: 17.040.30 - Measuring instruments
• ICS: 17.040.40 - Geometrical Product Specification (GPS)
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 26-May-2020
• Due Date: 18-Jun-2020
• Completion Date: 26-May-2020
• Ref Project: EN ISO 10360-4:2000/AC:2002 - Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode (ISO 10360-4:2000/Cor.1:2002)

Relations

• Corrects: SIST EN ISO 10360-4:2000 - Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode (ISO 10360-4:2000)
• Effective Date: 22-Dec-2008
• Corrects: SIST EN ISO 10360-4:2000 - Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode (ISO 10360-4:2000)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.&RUGeometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 4: KMG in Scanningmodus (ISO 10360-4:2000/Cor.1:2002)Spécification géometrique des produits (GPS) - Essais de réception et de vérification périodique des machines a mesurer tridimensionnelles (MMT) - Partie 4: MMT utilisées en mode de mesure par scanning (ISO 10360-4:2000/Cor.1:2002)Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode (ISO 10360-4:2000/Cor.1:2002)17.040.40Geometrical Product Specification (GPS)17.040.30MerilaMeasuring instrumentsICS:Ta slovenski standard je istoveten z:EN ISO 10360-4:2000/AC:2002SIST EN ISO 10360-4:2000/AC:2004en01-maj-2004SIST EN ISO 10360-4:2000/AC:2004SLOVENSKI
STANDARD



SIST EN ISO 10360-4:2000/AC:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 10360-4:2000/ACDecember 2002Décembre 2002Dezember 2002ICS 17.040.30English versionVersion FrançaiseDeutsche FassungGeometrical Product Specifications (GPS) - Acceptance andreverification tests for coordinate measuring machines(CMM) - Part 4: CMMs used in scanning measuring mode(ISO 10360-4:2000/Cor.1:2002)Spécification géometrique des produits (GPS) - Essais deréception et de vérification périodique des machines à mesurertridimensionnelles (MMT) - Partie 4: MMT utilisées en mode demesure par scanning (ISO 10360-4:2000/Cor.1:2002)Geometrische Produktspezifikation (GPS) - Annahmeprüfungund Bestätigungsprüfung für Koordinatenmessgeräte (KMG) -Teil 4: KMG in Scanningmodus (ISO 10360-4:2000/Cor.1:2002)This corrigendum becomes effective on 18 December 2002 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 18 décembre 2002 pour incorporation dans les trois versionslinguistiques officielles de l'EN.Die Berichtigung tritt am 18. Dezember 2002 zur Einarbeitung in die drei offiziellen Sprachfassungender EN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No. EN ISO 10360-4:2000/AC:2002 D/E/FSIST EN ISO 10360-4:2000/AC:2004



EN ISO 10360-4:2000/AC:2002 (E/F/D)2English versionEndorsement noticeThe text of ISO 10360-4:2000/Cor.1:2002 has been approved by CEN as a European Corrigendumwithout any modifications.Version françaiseNotice d'entérinementLe texte de l'ISO 10360-4:2000/Cor.1:2002 a été approuvé par le CEN comme Corrigendumeuropéen sans aucune modification.Deutsche FassungAnerkennungsnotizDer Text von ISO 10360-4:2000/Cor.1:2002 wurde vom CEN als Europäisches Corrigendum ohneirgendeine Abänderung genehmigt.SIST EN ISO 10360-4:2000/AC:2004



ICS
17.040.30 Ref. No. ISO 10360-4:2000/Cor.1:2002(E)©
ISO 2002 – All rights reserved Published in Switzerland
INTERNATIONAL STANDARD ISO 10360-4:2000 TECHNICAL CORRIGENDUM 1 Published 2002-11-15 INTERNATIONAL ORGANIZA
...